Linear Measurement
Đo tuyến tính		 GYAF1 probe
Đầu dò GYAF1		 The GYAF1 probe is an all-in-one type sensor with integrated controller. After supplying DC24V to the probe,an analogue voltage and/or current, which are proportional to the position of the magnet, can be obtained.
Reversed output or bipolar output can be supported as well. The flat head permits a miniaturized application, and the flange makes the installation easier, compared with the conventional screw type probes.		 SANTEST VIETNAM , ANS Vietnam
GYSE-S Probe
Đầu dò GYSE-S		 SSI output with 24 bits. Min.1μm / bit. SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
GYSE-A Probe
Đầu dò GYSE-A 		 The inside probe element can be detached from the outer housing (standard function for GYSE). Additionally, use of flexible element as an option (page 73) makes the exchange process extremely easy even under small work space. Using two pcs of magnet on the probe as another option, detecting each magnet position or relative distance between the two is possible. With the captive software (GPM), zero and gain adjustment is possible at user side. SANTEST VIETNAM , ANS Vietnam
GYSE-Q Probe
Đầu dò GYSE-Q		 Incremental output (A/B pulse), resolution is Min.
1μm(Quad divide). The working principle is based on a sampling detection method, in which pulse frequency is fixed to 250 kHz (STD).		 SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
GYcAT Probe
Đầu dò GYcAT		 Thanks to the Surface Mount Technology, the entire signal processing electronics of GYcAT series is integrated into a transducer head.
You can get a voltage or current analog signal proportional to a magnet position only by applying a 24V DC power supply directly to the transducer.
GYcAT series have alarm output and is equipped with noise cancellation functions.		 SANTEST VIETNAM , ANS Vietnam
GYMS Probe / GYMSC Controller
Đầu dò GYMS/Bộ điều khiển GYMSC		 Linearity : ≦±0.025%FS
Protection IP67
In combination with standard GYMSC controller, position output 0-10V / 4-20mA is available.
For velocity output or digital output, GyMS probe can be associated with GYHC or GYDC-05 controller.		 SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
GYPE2K Probe / GYMSC Controller
Đầu dò GYPE2K/Bộ điều khiển GYMSC		 The GYPE2K probe is a sensor characterized in a fine rod and a small head. A fine rod (outside diameter Φ4) and a small head expand the design flexibility of the equipment.
Standard magnet and float can be used.
With the GYMSC controller, it outputs analogue signal of 0-10V or 4-20mA.		 SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
GYGS Probe / GYGSC Controller
Đầu dò GYGS/Bộ điều khiển GYGSC		 The GYGS probe is a series of which sensor head is extremely thin (20mm thick) adopting new method of detecting magnetostrictive phenomena. Applying to hydraulic cylinder, its total length becomes space saving.
GYGS probe is used in combination with the GYGSC controller, which provides analogue output, 0-10V or 4-20mA, and can also be used in combination with GYHC or GYDC-05 controller, which provides velocity output or digital output. (refer P.42, P.46)		 SANTEST VIETNAM , ANS Vietnam
GYMT Probe / GYMTC Controller
Đầu dò GYMT/Bộ điều khiển GYMTC 		 The GYMT series, the compact probe and controller in the GY series, have an extremely simplified and carefully selected electronics in a small place. By employing COMBICON screw plug connectors of Phoenix Contact in the GYMTC controller, wiring operation becomes easier and more reliable. The GYMTC controller provides 0-10V voltage output or 4-20mA current output, indicating the position of the movable magnet along the GYMT probe rod. The power supply of GYMTC is ±15VDC. SANTEST VIETNAM , ANS Vietnam
GYcRS Probe
Đầu dò GYcRS		 Between probe and controller, RS422 differential line driver transmission, providing robustness against electrical noise, is used. In combination with GYDC-05 controller, Min. 1μm resolution is possible SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
GYMR5 Probe
Đầu dò GYMR5		 GYMR5 probe has compact sensor head compared with GYcRS probe, yet realizing the same technical specifications and completely compatible. Radial cable-out renders mechanical compactness, especially when mounted inside cylinders. GYMR5 probe is used in combination with GYFC2 or GYHC controller, which provides analogue output and GYDC-05 controller, which provides digital output. SANTEST VIETNAM , ANS Vietnam
GYKM Probe / GYMNC Controller
Đầu dò GYKM/Bộ điều khiển GYMNC 		 The profile measuring Φ25mm×height 22.5mm renders you a free mechanical design in adopting our "GY" series.
Applications have been widened by mounting GYKM series to cylinders, machines, equipment and it gives infinite life time due to magnetostrictive non-contact sensor, well replacing conventional potentiometers.
GYKM probe can also be used in combination with GYHC or GYDC-05 controller, which provides velocity output or digital output.		 SANTEST VIETNAM , ANS Vietnam
GYKM-LS / GYKM-LT Probe
Đầu dò GYKM-LS / GYKM-LT 		 Linear profile GYKM series have new version of all electronics integrated-"GYKM-LT/LS".
Mounting signal processing electronics to probe head, you can get an analogue signal (4-20mA or 0-10V) proportional to a magnet position.		 SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
GYKS Probe
Đầu dò GYKS		 GYKS series are another model for previous GYKM-LT/LS.
Through the body, Φ25mm×height 22.5mm is achieved without
head parts Φ37 of GYKM-LT/LS series, thus smart design is enjoyed.
Two types are available:sliding magnet type and floating magnet type.		 SANTEST VIETNAM , ANS Vietnam
GYSE-A-FX6 Probe
Đầu dò GYSE-A-FX6 		 Special probe for not linear but curve application. The material of the probe rod is PTFE, the rod parts can be bent (Min. R is 180mm). In case of long stroke, bending the rod and putting in a compact box is possible for transportation. SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
Linear Gauge
Đo tuyến tính với độ chính xác cao		 ATG1 ATG1 series is the all-in-one type of linear gauge.
A magnetic resistance element and magnetic tape are mounted inside the sensor. The tape is magnetized with the same pitch of N and S pole precisely.
The magnetic resistance element detects the magnetic fields on the tape and LSI converts the measured values into pulse output.		 SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
Linear Encoder
Bộ mã hóa tuyến tính		 PLR Linear Resolver All-in-one type High accuracy linear resolver SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
ON/OFF Switch
Công tắc đóng mở		 CS Series CS series is a switching sensor adopting magneto-inductive principle without mechanical contact. Combined with CSC controller, forward/backward limit points are output; furthermore the both points can be individually adjusted by trimmer integrated in the controller. As a sensor rod is completely sealed, the sensor can be installed inside hydraulic/pneumatic cylinders. Integrated coils inside sensor rod detect locations of movable magnet utilizing a change of inductance according to magneto-inductive principle. Since CS series has no mechanical contact as seen in coventional lead switches and also has no mechanical wear-out, a long life and reliability can be expected. Moreover the remote adjustment for detecting points is possible because switching points can be changed by trimmer in the controller. SANTEST VIETNAM , ANS Vietnam
Shock Data Logger
Bộ ghi dữ liệu Shock		 IMPAK-02 Using acceleration sensor (electrostatic capacitive type), IMPAK-02 observes shocks given during transportation. Setting a threashold for shock value (G) and selecting a recording interval (Seven sampling periods are available, from 1 second to 60 minutes) beforehand, IMPAK-02 observes the given shock continuously and records the maximum shock, which exceeds the threashold with the date and time by a built-in nonvolatile memory. The recorded data for shock is the maximum G value for each axis (X, Y, Z) in the selected recording interval. IMPAK-02 has a rechargeable battery built-in and works for 30 days continuously with full charge. After transportation, connecting to PC through USB cable, the recorded data is listed up and graphed instantly. It is also possible to output to the CSV or Excel file, and to analyze data freely.

In case that a large shock, which can damage the machine, is given, you can use alarm output from IMPAK-02 for automatically stop and protect the machine.		 SANTEST VIETNAM , ANS Vietnam
Rotary Measument
Máy đo tốc độ vòng quay		 RR-14R ・Low height
Simple structure : Constructed by two PCB bords and one rotor with magnetic plate

・Robust
Patterned Coil on multi-layered PCB : Hard to break compared with winding coil

・High Performance
High resolution (Absolute type : 0.22degree/ bit (16384bits/rotation)
Incremental type : 00055degree / bit (65536bits / rotation)
Accuracy (Absolute type : 1degree max. / Incremental type : 0.4degree max)		 SANTEST VIETNAM , ANS Vietnam
RR-16Q ・Low height
Simple structure : Constructed by two PCB bords and one rotor with magnetic plate

・Robust
Patterned Coil on multi-layered PCB : Hard to break compared with winding coil

・High Performance
High resolution (Absolute type : 0.22degree/ bit (16384bits/rotation)
Incremental type : 00055degree / bit (65536bits / rotation)
Accuracy (Absolute type : 1degree max. / Incremental type : 0.4degree max)		 SANTEST VIETNAM , ANS Vietnam
ARR ARR series is rotation angle sensor with simple strcture.It has an eccentric rotor which is linked to the shaft,and coils on 4 stator poles inside.
And it detects magnetic induction variation and converts to absolute output (0-10V or ±10V,4-20mA).
Preset function (setting 4mA or OV at any position) and switch function (CW or CCW) is available.		 SANTEST VIETNAM , ANS Vietnam
Servo Controller
Bộ điều khiển Servo		 I-SAC C1 I - SAC C1 is a compact and low-cost series,
User can add axes upto four acoording to his necessity.

Axes upto 4 on your demand
One I-SAC C1-M (Elec Source/Communication board
block) can accept upto 4 I-SAC C1-S (servo block)
which provide compactness and low-cost.
Control processing is done independently by each DSP.

Compact, Easy-Mounting
I-SAC C1 series are designed compact and can easily
mount on DIN-rail.		 SANTEST VIETNAM , ANS Vietnam
I-SAC MX I-SAC MX is the high-end version of series mploying 32bit DSP, in addition motion control unction is integrated. Increased I/O interfaces enable flexible measures to most user needs.

[ Motion Program ]
User can set a motion profile into ISAC-MX and can automatically control the plant according to the profile.
Various interfaces with PLC can be worked by giving special target value needed.

[ Various Handshaking Signals ]
Servo On/Off, Automatic Zero Searching, In-Position output etc are equipped and can be easily interfaced with PLC.

[ 2-Axis Independent control and Axis Switching ]
Two Independent controllers are built-in and can swith axes during operations. Example is a firstly position control then immediate switch to load control in real time.		 SANTEST VIETNAM , ANS Vietnam
Solenoid Valve Digital Amp
Bộ khuếch đại kĩ thuật số cho van điện từ		 VAC series Proportional Solenoid Valve Digital Amp SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
SANTEST VIETNAM , ANS Vietnam
Remote device
Thiết bị từ xa		 IRD Series IRD series are the products that correspond to a so-called remote I/O. It provides interfaces with various sensors and actuators by combining slave modules to a single master module.
IRD system is composed of one master module and one or several slave modules. The terminal resister is connected to the right end module.
In IRD system, keeping functions of slave modules, you can connect to any PLC only by changing type of master modules.		 SANTEST VIETNAM , ANS Vietnam
Servo Valve
Van Servo		 DA03S DA series is a unique "High Speed Servo-valve" for hydaulic and pneumatic application, employing "Dual Halbach Magnet Array" which reinforces magnetic tandem, as a result the higher response and surpassing anti-contamination characteristics can be obtained. SANTEST VIETNAM , ANS Vietnam