C6925-1016-0030 |
Fanless control cabinet Industrial PC customer-specific co. Fronius
Housing
– fanless industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to lead
out interfaces of the motherboard ex factory
– passive cooling without fan with a heat sink
– 5 cm (2") free space on top and bottom of the PC necessary for air
circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 1.75 kg (3.9 lbs)
– compact dimensions (W x H x D) 65 x 223 x 121 mm
(2.6" x 8.8" x 4.8") without mounting plate
Features
– processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3:40)
– 3½-inch motherboard for Intel® Atom™
– 2 GB DDR3L RAM, expandable ex factory to 8 GB
– graphic adapter integrated inside the Intel® processor, DVI-I port
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– 4 GB CFast card, extended temperature range
– 4 USB 2.0 ports
– 24 V DC power supply
– Microsoft Windows Embedded Compact 7, English
C9900-C573
processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50), instead
of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
At Microsoft Windows Embedded Compact 7 only one core is supported.
Multicore support is available at Windows 7 Embedded Standard,
Windows 7 Pro, Windows 7 Ultimate and Windows 10 IoT Enterprise
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-B415
Third on-board Ethernet adapter on the 3½-inch motherboard for
Intel® Atom™ or Intel® Celeron® ULV 827E 1.4 GHz, wired out with a
100/1000BASE-T connector inside the connector bracket at the
connection section
C9900-H752
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 4-GB-CFast card, requires Windows Embedded Standard 7,
Windows 7 Professional, Windows 7 Ultimate or Windows 10 IoT
Enterprise
C9900-S476
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, German, for industrial PCs with Intel® Atom™ E38xx
C9900-E255
Serial port RS232, optically linked, overload protection,
D-sub 9-pin connector.
|
Beckhoff Vietnam
|
C6930-0050
|
Control cabinet Industrial PC
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe module slots to plug-in Beckhoff PCIe modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm
(3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
C6930-0060
|
Control cabinet Industrial PC
Housing
– industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 2 slots for 2½-inch hard disks or SSDs behind the front flap
– 1 slot for one CFast flash card behind the front flap
– 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
– fan cartridge with speed control and double ball bearing fans,
accessible from the front
– 5 cm (2") free space above and under the PC required for air circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5“ x 9.3“ x
4.8“) without mounting plate
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
– 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
– hard disk, 2½-inch, 320 GB
– 1 serial port RS232 and 4 USB 3.0 ports
– 24 V DC power supply
|
Beckhoff Vietnam
|
C6930-1009-0030-E
|
Control cabinet Industrial PC custom specific co Messer
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe module slots to plug-in Beckhoff PCIe modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 89 x 231 x 119 mm
(3.5" x 9.1" x 4.7") without mounting plate
Features
- processor Intel® Celeron® T3100 1.9 GHz, 2 cores
- 3½-inch motherboard for Intel® Celeron®, Core™2 Duo or Core™2 Quad
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- on-board graphic adapter, Intel® GMA 4500MHD, DVI-I connector
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Matrix Storage Technology
- 2 GB CFast card, extended temperature range
- 1 serial port RS232 and 4 USB 2.0 ports
- 24 V DC power supply
- operating system Microsoft Windows CE 6, English, uses one core of
the processor
C9900-B511
2 PCI plug-in card slots on the passive backplane integrated inside
C6930, to plug-in PCI cards up to 190 mm (6.3") length.
The connectors of the plug-in cards are located at the top side of
the PC on the right. The width of the PC housing is increased by 70 mm
(2.76"), the depth is increased by 18 mm (0.7").
FC9151-0000
Ethernet PC network card 10/100/1000 MBit/s, 1 channel, Mini PCI
interface
C9900-H167
hard disk, 2½-inch, 320 GB, instead of 2 GB CFast card, requires
Windows Embedded Standard 2009, Windows XP Professional or Windows 7
C9900-I488
Windows XP Professional image with one license for one pc,
multilingual, type Messer Cutting Systems GmbH, C6930-0030
C9900-S876
Acronis True Image English for Windows XP Professional and
Windows XP Embedded, can only be ordered together with a PC or
Ethernet Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
TS5210-1100 TwinCAT-CNC-E Vers. Messer
Licence to use a CNC path control software for Windows NT/2000/XP
- Application version ´Messer, based on TwinCAT PLC or TwinCAT NC PTP:
- TwinCAT real-time system for deterministic program flow
- TwinCAT System Manager for task,channel,axis and I/O configuration
- 8 axes/spindles, expandable to a max. of 32 axes/spindles (optional)
- 1 CNC channel, expandable to a maximum of 10 CNC channels (optional)
- Comprehensive CNC/PLC interface (HLI)
- Axis interface:
- Analog/encoder interface via freely selectable fieldbus
- Digital interface (Lightbus, Sercos, Profibus MC)
- 8 interpolating path axes.
- DIN 66025 programming with high-level language extensions
Licence for one CPU
The licence agreements for Beckhoff software products apply.
|
Beckhoff Vietnam
|
C6930-1071-0050
|
Control cabinet Industrial PC customer-specific co. KUKA
KUKA SAP nr.: 91-400-770
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm
(3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-E237
additional DVI-D plug led out on a Module bracket
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-F894
Customized label for C6920/C6930 type "Kuka"
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S450
Microsoft Windows 7 Ultimate 64 bit, German and English, English
desktop active, further languages can be installed
C9900-I592
Custom specific partition arrangement
C: 100 GB
D: remaining
TC1250-0080
License for usage of TC3 PLC/NC PTP 10 axes
License for one CPU. The Beckhoff software license agreements
are valid.
TC1300-0080
License for usage of TC3 C++
License for one CPU. The Beckhoff software license agreements
are valid.
C9900-Z408
Label of C6920 and C6930 with customer-specific printing co. KUKA
|
Beckhoff Vietnam
|
C6930-1072-0050
|
Control cabinet Industrial PC customer-specific co. KUKA
KUKA SAP nr.: 91-400-772
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm
(3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-E237
additional DVI-D plug led out on a Module bracket
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-F894
Customized label for C6920/C6930 type "Kuka"
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S450
Microsoft Windows 7 Ultimate 64 bit, German and English, English
desktop active, further languages can be installed
C9900-I592
Custom specific partition arrangement
C: 100 GB
D: remaining
TC1260-0080
License for usage of TC3 PLC, NC PTP 10, NC I
License for one CPU. The Beckhoff software license agreements
are valid.
TC1300-0080
License for usage of TC3 C++
License for one CPU. The Beckhoff software license agreements
are valid.
C9900-Z408
Label of C6920 and C6930 with customer-specific printing co. KUKA
|
Beckhoff Vietnam
|
C6930-1077-0050
|
Control cabinet Industrial PC customer-specific co. CTMC
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm
(3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-S444
Microsoft Windows 7 Ultimate 32 bit, multilanguage, English
desktop active, further languages configurable
FC9062
Gigabit Ethernet PCIe module for PCs with Beckhoff PCIe module slots,
2-channel, PCI Express x1 bus
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-M653
mounting plate at the side wall, instead of plate at the rear wall
C9900-E276
CP-Link 4 Extender Tx PCIe Module for connecting a CP-Link 4 interface
Control Panel CP29xx-0010 or CP39xx-0010.
For industrial- and Panel-pcs with PCIe module slot from motherboard
generation CB3055
- CP-Link 4 transmitter Modulee for ex works installation in PCs with
Beckhoff PCIe Modulee slots
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
For connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-H550
4 GB CFast card, SLC flash, extended temperature range
|
Beckhoff Vietnam
|
C6930-1078-0050
|
Control cabinet Industrial PC customer-specific co. CTMC
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm
(3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-S344
Microsoft® Windows XP professional for industrial PCs with Intel®
fourth generation Core™ processors, 32 bit, multilingual,
English desktop active
FC9062
Gigabit Ethernet PCIe module for PCs with Beckhoff PCIe module slots,
2-channel, PCI Express x1 bus
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-M653
mounting plate at the side wall, instead of plate at the rear wall
C9900-E276
CP-Link 4 Extender Tx PCIe Module for connecting a CP-Link 4 interface
Control Panel CP29xx-0010 or CP39xx-0010.
For industrial- and Panel-pcs with PCIe module slot from motherboard
generation CB3055
- CP-Link 4 transmitter Modulee for ex works installation in PCs with
Beckhoff PCIe Modulee slots
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
For connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-H550
4 GB CFast card, SLC flash, extended temperature range
|
Beckhoff Vietnam
|
C6930-1079-0050
|
Control cabinet Industrial PC customer-specific co. CTMC
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm
(3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-S444
Microsoft Windows 7 Ultimate 32 bit, multilanguage, English
desktop active, further languages configurable
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-M653
mounting plate at the side wall, instead of plate at the rear wall
C9900-E276
CP-Link 4 Extender Tx PCIe Module for connecting a CP-Link 4 interface
Control Panel CP29xx-0010 or CP39xx-0010.
For industrial- and Panel-pcs with PCIe module slot from motherboard
generation CB3055
- CP-Link 4 transmitter Modulee for ex works installation in PCs with
Beckhoff PCIe Modulee slots
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
For connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
|
Beckhoff Vietnam
|
C6930-1084-0050-E
|
Control cabinet Industrial PC customer-specific co. Messer
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-B511
2 PCI plug-in card slots on the passive backplane integrated inside
C6930, to plug-in PCI cards up to 190 mm (7.5") length.
The connectors of the plug-in cards are located at the top side of
the PC on the right. The width of the PC housing is increased by 70 mm
(2.76"), the depth is increased by 18 mm (0.7").
C9900-I720
Windows 7 Professional 32 Bit image with one license for one pc,
English, type Messer Cutting Systems GmbH, C6930-0050, C6525-0050,
CP7202-0050, TC CNC-E
C9900-S883
Acronis™ Backup & Recovery Workstation 11.5, English, for Windows XP,
Windows 7 and Windows Embedded Standard, can only be ordered
together with a PC. Suitable for 64 bit PCs (= PCs with DDR3-RAM),
even with 32 bit
TS5210-1100
Licence to use a CNC path control software for Windows NT/2000/XP/7
- Application version ´Messer, based on TwinCAT PLC or TwinCAT NC PTP:
- TwinCAT real-time system for deterministic program flow
- TwinCAT System Manager for task,channel,axis and I/O configuration
- 8 axes/spindles, expandable to a max. of 32 axes/spindles (optional)
- 1 CNC channel, expandable to a maximum of 10 CNC channels (optional)
- Comprehensive CNC/PLC interface (HLI)
- Axis interface:
- Analog/encoder interface via freely selectable fieldbus
- Digital interface (Lightbus, Sercos, Profibus MC)
- max. 4 interpolating path axes
path axes
- DIN 66025 programming with high-level language extensions
Licence for one CPU
The licence agreements for Beckhoff software products apply.
FC9151-0000
Ethernet PC network card 10/100/1000 MBit/s, 1 channel, Mini PCI
interface
|
Beckhoff Vietnam
|
C6930-1093-0040
|
Control cabinet Industrial PC customer-specific co. Jekson
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® B810 1.6 GHz, 2 cores
- 3½-inch motherboard for 2nd and 3rd Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3 RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 2.0 ports
- 24 V DC power supply
C9900-C542
processor 2nd Generation Intel® Core™ i5 2510E, 2.5 GHz, 2 cores,
instead of Intel® Celeron® B810 1.6 GHz
C9900-R249
memory extension to 4 GB DDR3 RAM, instead of 2 GB, requires a 64 bit
operating system or only 3 GB are addressable
C9900-B511
2 PCI plug-in card slots on the passive backplane integrated inside
C6930, to plug-in PCI cards up to 190 mm (7.5") length.
The connectors of the plug-in cards are located at the top side of
the PC on the right. The width of the PC housing is increased by 70 mm
(2.76"), the depth is increased by 18 mm (0.7").
C9900-K294
additional power supply cable for plug-in cards inside C6930 with
plug-in card slots on a passive backplane.
2 HDD plugs 4 pin with 5 V / 2 A and 12 V / 3 A
Assembly only possible ex-factory
3x C9900-E255
Serial por RS232, optically linked, overload protection,
D-sub 9-pin connector.
C9900-B300
Specific BIOS for CB3056 in customer-specific version for co. Jekson,
instead of standard BIOS
|
Beckhoff Vietnam
|
C6930-1094-0040
|
Control cabinet Industrial PC customer-specific co. Jekson
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® B810 1.6 GHz, 2 cores
- 3½-inch motherboard for 2nd and 3rd Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3 RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 2.0 ports
- 24 V DC power supply
C9900-C543
processor 2nd Generation Intel® Core™ i7 2710QE, 2.1 GHz, 4 cores,
instead of Intel® Celeron® B810 1.6 GHz
C9900-R249
memory extension to 4 GB DDR3 RAM, instead of 2 GB, requires a 64 bit
operating system or only 3 GB are addressable
C9900-B511
2 PCI plug-in card slots on the passive backplane integrated inside
C6930, to plug-in PCI cards up to 190 mm (7.5") length.
The connectors of the plug-in cards are located at the top side of
the PC on the right. The width of the PC housing is increased by 70 mm
(2.76"), the depth is increased by 18 mm (0.7").
C9900-K294
additional power supply cable for plug-in cards inside C6930 with
plug-in card slots on a passive backplane.
2 HDD plugs 4 pin with 5 V / 2 A and 12 V / 3 A
Assembly only possible ex-factory
3x C9900-E255
Serial por RS232, optically linked, overload protection,
D-sub 9-pin connector.
C9900-B300
Specific BIOS for CB3056 in customer-specific version for co. Jekson,
instead of standard BIOS
|
Beckhoff Vietnam
|
C6930-1100-0050
|
Control cabinet Industrial PC customer-specific co. Prieß & Horstmann
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-E276
CP-Link 4 Extender Tx PCIe Module for connecting a CP-Link 4 interface
Control Panel CP29xx-0010 or CP39xx-0010.
For industrial- and Panel-pcs with PCIe module slot from motherboard
generation CB3055
- CP-Link 4 transmitter Modulee for ex works installation in PCs with
Beckhoff PCIe Modulee slots
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
For connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-S442
Microsoft Windows 7 Professional 64 bit, German.
Does not support PCI or MiniPCI Ethernet cards. PCI-Express Ethernet
cards are supported. For example FC9022 or FC9062
TC1260-0080
License for usage of TC3 PLC, NC PTP 10, NC I
License for one CPU. The Beckhoff software license agreements
are valid.
TF5020-0080
License for usage of TC3 NC PTP Axes Pack unlimited
License for one CPU. The Beckhoff software license agreements
are valid.
|
Beckhoff Vietnam
|
C6930-1101-0050
|
Control cabinet Industrial PC customer-specific co. Prieß & Horstmann
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-E276
CP-Link 4 Extender Tx PCIe Module for connecting a CP-Link 4 interface
Control Panel CP29xx-0010 or CP39xx-0010.
For industrial- and Panel-pcs with PCIe module slot from motherboard
generation CB3055
- CP-Link 4 transmitter Modulee for ex works installation in PCs with
Beckhoff PCIe Modulee slots
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
For connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-S445
Microsoft Windows 7 Ultimate 64 bit, multilanguage, English
desktop active, further languages configurable.
TC1260-0080
License for usage of TC3 PLC, NC PTP 10, NC I
License for one CPU. The Beckhoff software license agreements
are valid.
TF5020-0080
License for usage of TC3 NC PTP Axes Pack unlimited
License for one CPU. The Beckhoff software license agreements
are valid.
|
Beckhoff Vietnam
|
C6930-1106-0050
|
Control cabinet Industrial PC "XTS optimized configuration"
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans, accessible from the front
- 5 cm (2") free space above and under the PC required for air circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®, Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores (TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a 64 bit operating system
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power supply, without battery, occupies one internal serial interface
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
2x FC9062
Gigabit Ethernet PCIe Modulee for PCs with Beckhoff PCIe Module slots, 2-channel, PCI Express x1 bus
FC9071
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
C9900-S481
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 64 bit, English, for industrial PCs with
Intel® Core™ i7 from the 4th generation or Xeon®
C9900-M986
customer-specific print of the front and the module brackets of the C6930-1106-0050, instead of standard print
C9900-F021
Customized label for C6930 type "Beckhoff - XTS", with cutout for FC9071-0000
TC1250-0080
License for usage of TC3 PLC/NC PTP 10 axes
License for one CPU. The Beckhoff software license agreements are valid.
TF5850-0080
License for usage of TC3 XTS Technology
License for one CPU. The Beckhoff software license agreements are valid.
TE1000-0000
Pre-installation of the TC3 Engineering on a Beckhoff IPC.
The license agreements apply for Beckhoff software products.
Without licenses.
C9900-S903
EtherCAT driver for all LAN ports preinstalled.
Can be ordered in conjunction with a Windows Embedded Standard 7,
Windows 7 Professional, Windows 7 Ultimate or Windows 10 IoT Enterprise. Requires the installation of TwinCAT
|
Beckhoff Vietnam
|
C6930-1109-0050
|
Control cabinet Industrial PC customer-specific co. Trumpf
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-H741
solid-state disk SSD, 3D MLC Flash, 2½-inch, 120 GB
C9900-H742
solid-state disk SSD, 3D MLC Flash, 2½-inch, 120 GB,
instead of 2½-inch hard disk
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-A219
PC without RAID configuration, instead of RAID1. Each storage medium
inside the PC is a separate drive
|
Beckhoff Vietnam
|
C6930-1112-0050
|
Control cabinet Industrial PC customer-specific co. Messer
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-I788
Windows 10 IoT Enterprise 2016 LTSB, 32 Bit, MBR, multilingual,
for Industrial PCs with Intel® Core™ i7 of the 4th and 6th generation,
type Messer Cutting Systems GmbH, C6930-0050
C9900-S883
Acronis™ Backup, English, for PCs with at least 2 GB RAM,
can only be ordered together with a PC
TX1270-1100
Licence to use a CNC path control software for Windows NT/2000/XP
- Application version ´Messer, based on TwinCAT PLC or TwinCAT NC PTP:
- TwinCAT real-time system for deterministic program flow
- TwinCAT System Manager for task,channel,axis and I/O configuration
- 8 axes/spindles, expandable to a max. of 32 axes/spindles (optional)
- 1 CNC channel, expandable to a maximum of 10 CNC channels (optional)
- Comprehensive CNC/PLC interface (HLI)
- Axis interface:
- Analog/encoder interface via freely selectable fieldbus
- Digital interface (Lightbus, Sercos, Profibus MC)
- 8 interpolating path axes, expandable to a max. of 32 interpolating
path axes
- DIN 66025 programming with high-level language extensions
Licence for one CPU
The licence agreements for Beckhoff software products apply.
FC9151-0000
Ethernet PC network card 10/100/1000 MBit/s, 1 channel, Mini PCI
interface
|
Beckhoff Vietnam
|
C6930-1114-0050
|
Control cabinet Industrial PC customer-specific co. Bausch & Ströbel
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C563
processor 4th Generation Intel® Core™ i5 4400E, 2.7 GHz, 2 cores
(TC3:70), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-E290
CP-Link 4 Extender Tx PCIe module
customer-specific co. Bausch & Ströbel
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S443
Microsoft Windows 7 Professional 64 bit, English.
Does not support PCI or MiniPCI Ethernet cards. PCI-Express Ethernet
cards are supported. For example FC9022 or FC9062
|
Beckhoff Vietnam
|
C6930-1115-0050
|
Control cabinet Industrial PC customer-specific co. Priess & Horstmann
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-S474
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 32 bit, German, for industrial PCs with Intel® Core™ i7 of
the 4th and 6th generation
TX1260
License for usage of an Interpolation and PTP positioning software
for Windows NT/2000/XP with integrated IEC 61131-3 PLC TwinCAT PLC.
|
Beckhoff Vietnam
|
C6930-1120-0060
|
Control cabinet Industrial PC customer-specific co. Trumpf
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H742
solid-state disk SSD, 3D flash, 2½-inch, 120 GB,
instead of 2½-inch hard disk
C9900-H741
solid-state disk SSD, 3D flash, 2½-inch, 120 GB
C9900-B507
2 PCIe plug-in card slots on the passive backplane integrated inside
C6930, to plug-in PCIe x1 cards up to 190 mm (7.5") length.
The connectors of the plug-in cards are located at the top side of
the PC on the right. The width of the PC housing is increased by 70 mm
(2.76"), the depth is increased by 18 mm (0.7").
FC9062
Gigabit Ethernet PCIe Modulee for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
|
Beckhoff Vietnam
|
C6930-1121-0060
|
Control cabinet Industrial PC
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-F068
Customised label for C6930 type "b+m"
C9900-B537
Specific BIOS for C6930-1121-0060 in customer-specific version
co. b + m
- "b + m" full screen boot logo
- The development of the BIOS ist fixed and will not be updated
automatically
C9900-Z448
Label of C6930-1121-0060 with customer-specific printing co. b+m,
instead of standard label
|
Beckhoff Vietnam
|
C6930-1125-0060
|
Control cabinet Industrial PC customer-specific co. Kraft
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C619
processor 7th Generation Intel® Core™ i5-7500(T), 2.7 GHz,
4 cores (TC3: 70), requires Windows 10 64 Bit,
instead of Intel® Celeron® G3900TE 2.3 GHz (TC3: 50)
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
FC9062
Gigabit Ethernet PCIe Modulee for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-E286
Installation of FC9062 into the lower PCIe module slot of C6930 with
connector number 122/123, instead of installation into the upper PCIe
module slot.
C9900-S479
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, English, for industrial PCs with Intel® Celeron®,
Pentium®, Core™ i3 or Core™ i5 from the 4th generation
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
|
Beckhoff Vietnam
|
C6930-1126-0060
|
Control cabinet Industrial PC customer-specific co. Automation W+R
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans, accessible from the front
- 5 cm (2") free space above and under the PC required for air circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-F940
Customized label for C6930 type "Automation W&R"
C9900-B538
Specific BIOS for CB3064 with customer-specific full screen logo co. Automation W+R GmbH
C9900-C620
processor 7th Generation Intel® Core™ i7-7700(T), 2.9 GHz, 4 cores (TC3: 80), requires Windows 10 64 Bit,
instead of Intel® Celeron® G3900TE 2.3 GHz (TC3: 50)
2x FC9062
Gigabit Ethernet PCIe Modulee for PCs with Beckhoff PCIe Module slots, 2-channel, PCI Express x1 bus
C9900-S481
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 64 bit, English,
for industrial PCs with Intel® Core™ i7 from the 4th generation or Xeon®
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a 64 bit operating system.
FC9071-0000
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
C9900-H192
additional hard disk, 2½-inch, 1 TB in the control cabinet PC C6930
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-Z433
Label of a C6915, C6920, C6925 or C6930 without Beckhoff Logo
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
|
Beckhoff Vietnam
|
C6930-1127-0060
|
Control cabinet Industrial PC customer-specific co. G.D
GD SPA no. 25,31018010
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C620
processor 7th Generation Intel® Core™ i7-7700(T), 2.9 GHz,
4 cores (TC3: 80), requires Windows 10 64 Bit,
instead of Intel® Celeron® G3900TE 2.3 GHz (TC3: 50)
C9900-R270
Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H742
solid-state disk SSD, 3D flash, 2½-inch, 120 GB, instead of 2½-inch hard disk
C9900-H552
16 GB CFast card, SLC flash, extended temperature range
2x FC9062
Gigabit Ethernet PCIe Modulee for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
FC9071-0000
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S481
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, English, for industrial PCs with Intel® Core™ i7
from the 4th generation or Xeon®
C9900-S408
Image installed on the solid state disk
C9900-Z435
single packaging for every device of a delivery. price per device.
C9900-S709-0021
Customerspec. TwinCAT 3 Volume-ID-Branding, Company GD
Based on TC3 Volume-Bundle TC1250-0000-0021
The bundle is not included in this option.
|
Beckhoff Vietnam
|
C6930-1128-0060
|
Control cabinet Industrial PC customer-specific co. Husky
HPN: 9176952
Housing
– industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 2 slots for 2½-inch hard disks or SSDs behind the front flap
– 1 slot for one CFast flash card behind the front flap
– 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led out interfaces of the motherboard ex factory
– fan cartridge with speed control and double ball bearing fans, accessible from the front
– 5 cm (2") free space above and under the PC required for air circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5“ x 9.3“ x 4.8“) without mounting plate
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
– 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
– hard disk, 2½-inch, 320 GB
– 1 serial port and 4 USB 3.0 ports
– 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz, 4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R270
Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a 64 bit operating system.
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power supply, without battery, occupies one internal serial interface
C9900-E271
USB Extender 2.0 Tx PCIe Module
- USB Extended 2.0 transmitter
- 1 USB Extended 2.0 output with RJ 45 socket for up to 50m CAT 5 cable for connecting a Control Panel with
DVI/USB extended 2.0 interface CP29xx-0000 or CP39xx-0000
- for PCIe Module slot mounting ex factory
- USB transfer rate up to 480 MBit/s for USB 2.0
C9900-S481
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 64 bit, English, for industrial PCs with
Intel® Core™ i7 from the 4th generation or Xeon®
C9900-Z248
Premounted accessories for connecting a ground cable
C9900-P930
Power supply connector for Industrial PC C69xx or CP62xx, C63xx, 8-pin connectors with tension spring connector instead of
standard power supply connector with tension clamp connector
TC1200-0080
License for usage of TC3 PLC
License for one CPU. The Beckhoff software license agreements are valid.
C9900-Y115
Module slot configuration C6930-1013-0040, C6930-1128-0060 and C6930-1129-0060 co. Husky
upper slot: empty
lower slot: C9900-E271
C9900-B553
Specific BIOS for C6930-1128-0060 in customer-specific version co. Husky
- boot option: 1. USB, 2. HDD/SSD
- The development of the BIOS is fixed and will not be updated automatically
|
Beckhoff Vietnam
|
C6930-1129-0060
|
Control cabinet Industrial PC customer-specific co. Husky
HPN: 9055907
Housing
– industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 2 slots for 2½-inch hard disks or SSDs behind the front flap
– 1 slot for one CFast flash card behind the front flap
– 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led out interfaces of the motherboard ex factory
– fan cartridge with speed control and double ball bearing fans, accessible from the front
– 5 cm (2") free space above and under the PC required for air circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5“ x 9.3“ x 4.8“) without mounting plate
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
– 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
– hard disk, 2½-inch, 320 GB
– 1 serial port and 4 USB 3.0 ports
– 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz, 4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power supply, without battery, occupies one internal serial interface
C9900-E271
USB Extender 2.0 Tx PCIe Module
- USB Extended 2.0 transmitter
- 1 USB Extended 2.0 output with RJ 45 socket for up to 50m CAT 5 cable for connecting a Control Panel with
DVI/USB extended 2.0 interface CP29xx-0000 or CP39xx-0000
- for PCIe Module slot mounting ex factory
- USB transfer rate up to 480 MBit/s for USB 2.0
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English and German, more languages can be installed,
multi finger touch screen support
C9900-Z248
Premounted accessories for connecting a ground cable
TwinCAT 2 Husky license
C9900-P930
Power supply connector for Industrial PC C69xx or CP62xx, C63xx, 8-pin connectors with tension spring connector
instead of standard power supply connector with tension clamp connector
C9900-S319
Operating system not installed
C9900-Y115
Module slot configuration C6930-1013-0040, C6930-1128-0060 and C6930-1129-0060 co. Husky
upper slot: empty
lower slot: C9900-E271
C9900-B548
Specific BIOS for C6930-1129-0060 in customer-specific version Co. Husky
- Boot mode: legacy
- Boot option: 1. USB, 2. HDD
- The development of the BIOS is fixed and will not be updated automatically
|
Beckhoff Vietnam
|
C6930-1132-0050
|
Control cabinet Industrial PC customer-specific co. Audi
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R259
memory extension to 16 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-E277
USB 3.0 PCIe Module
- 2-port USB 3.0 interfaces
- USB-Übertragungsrate bis 5 Gbit/s entsprechend USB 3.0
- compatible to all USB standards
- delivers up to 1 A supply current at each USB port
- requires Windows Embedded Standard 7, Windows 7 or Windows 10
C9900-H749
solid-state disk SSD, 3D flash, 2½-inch, 240 GB
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
|
Beckhoff Vietnam
|
C6930-1134-0060
|
Control cabinet Industrial PC customer-specific co. Nagel
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C609
processor 6th generation Intel® Core™ i5-6500TE, 2.3 GHz,
4 cores (TC3:70), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
C9900-H145
additional hard disk, 2½-inch, 320 GB
FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-E221
2 USB ports of the motherboard led out in the front of a C6930
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S444
Microsoft Windows 7 Ultimate 32 bit, multilanguage, English
desktop active, further languages configurable
|
Beckhoff Vietnam
|
C6930-1135-0060
|
Control cabinet Industrial PC customer-specific co. Husky
HPN:
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-E271
USB Extender 2.0 Tx PCIe Modulee
- USB Extended 2.0 transmitter
- 1 USB Extended 2.0 output with RJ 45 socket for up to 50m
CAT 5 cable for connecting a Control Panel with DVI/USB extended 2.0
interface CP29xx-0000 or CP39xx-0000
- for PCIe Module slot mounting ex factory
- USB transfer rate up to 480 MBit/s for USB 2.0
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
C9900-Z248
Premounted accessories for connecting a ground cable
TwinCAT 2 Husky license
C9900-P930
Power supply connector for Industrial PC C69xx or CP62xx, C63xx,
8-pin connectors with tension spring connector instead of
standard power supply connector with tension clamp connector
|
Beckhoff Vietnam
|
C6930-1136-0060
|
Control cabinet Industrial PC customer-specific co. Veeco
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
FC9062
Gigabit Ethernet PCIe Modulee for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-E237
additional DVI-D plug led out on a Module bracket
C9900-S424
Microsoft Windows Embedded Standard 7, 64 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
|
Beckhoff Vietnam
|
C6930-1137-0060
|
Control cabinet Industrial PC customer-specific co. GF MS
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-B511
2 PCI plug-in card slots on the passive backplane integrated inside
C6930, to plug-in PCI cards up to 190 mm (7.5") length.
The connectors of the plug-in cards are located at the top side of
the PC on the right. The width of the PC housing is increased by 70 mm
(2.76"), the depth is increased by 18 mm (0.7").
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R270
Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S444
Microsoft Windows 7 Ultimate 32 bit, multilanguage, English
desktop active, further languages configurable
FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-E277
USB 3.0 PCIe Module
- 2-port USB 3.0 interfaces
- USB transfer rate up to 5 Gbit/s for USB3.0
- compatible to all USB standards
- delivers up to 1 A supply current at each USB port
- requires Windows Embedded Standard 7, Windows 7 or Windows 10
C9900-Y124
Module slot configuration C6930-1137-0060, co. GF MS
Upper module slot 1: FC9062
Lower module slot 2: C9900-E277
|
Beckhoff Vietnam
|
C6930-1139-0060
|
Control cabinet Industrial PC customer-specific co. Uhlmann
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Modulee slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C619
processor 7th Generation Intel® Core™ i5-7500(T), 2.7 GHz,
4 cores (TC3: 70), requires Windows 10 64 Bit,
instead of Intel® Celeron® G3900TE 2.3 GHz (TC3: 50)
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-H749
solid-state disk SSD, 3D flash, 2½-inch, 240 GB
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-S479
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, English, for industrial PCs with Intel® Celeron®,
Pentium®, Core™ i3 or Core™ i5 from the 4th generation
|
Beckhoff Vietnam
|
C6930-1140-0060
|
Control cabinet Industrial PC customer-specific Trumpf TSI Gen. 5
Housing
– industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 2 slots for 2½-inch hard disks or SSDs behind the front flap
– 1 slot for one CFast flash card behind the front flap
– 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led out interfaces of the motherboard ex factory
– fan cartridge with speed control and double ball bearing fans, accessible from the front
– 5 cm (2") free space above and under the PC required for air circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5“ x 9.3“ x 4.8“) without mounting plate
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
– 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
– hard disk, 2½-inch, 320 GB
– 1 serial port and 4 USB 3.0 ports
– 24 V DC power supply
C9900-C609
processor 6th generation Intel® Core™ i5-6500TE, 2.3 GHz, 4 cores (TC3:70), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a 64 bit operating system.
C9900-B507
2 PCIe plug-in card slots on the passive backplane integrated inside C6930, to plug-in PCIe x1 cards up to 190 mm (7.5”) length.
The connectors of the plug-in cards are located at the top side of the PC on the right. The width of the PC housing
is increased by 70 mm (2.76”), the depth is increased by 18 mm (0.7”).
C9900-H749
solid-state disk SSD, 3D flash, 2½-inch, 240 GB
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at the Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power supply, without battery, occupies one internal serial interface
C9900-P945
Power supply connector for Industrial PC C5210, C63xx, C65xx, C69xx, CP22xx,CP26xx CP27xx, CP62xx, CP63xx or CP67xx,
8-pin connectors with Push IN connector and strain relief for the external power supply Cables,
instead of standard power supply connector
C9900-A219
PC without RAID configuration, instead of RAID1. Each storage medium inside the PC is a separate drive
|
Beckhoff Vietnam
|
C6930-1141-0060
|
Control cabinet Industrial PC
Customer-specific co. Trumpf TSI Gen. 5 Highend
Housing
– industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 2 slots for 2½-inch hard disks or SSDs behind the front flap
– 1 slot for one CFast flash card behind the front flap
– 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led out interfaces of the motherboard ex factory
– fan cartridge with speed control and double ball bearing fans, accessible from the front
– 5 cm (2") free space above and under the PC required for air circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5“ x 9.3“ x 4.8“) without mounting plate
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
– 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
– hard disk, 2½-inch, 320 GB
– 1 serial port and 4 USB 3.0 ports
– 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz, 4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R272
Memory extension to 32 GB DDR4 RAM, instead of 4 GB, requires a 64 bit operating system.
C9900-B507
2 PCIe plug-in card slots on the passive backplane integrated inside C6930, to plug-in PCIe x1 cards up to 190 mm (7.5”) length.
The connectors of the plug-in cards are located at the top side of the PC on the right.
The width of the PC housing is increased by 70 mm (2.76”), the depth is increased by 18 mm (0.7”).
C9900-H749
solid-state disk SSD, 3D flash, 2½-inch, 240 GB
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at the Control Panel
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power supply, without battery, occupies one internal serial interface
C9900-P945
Power supply connector for Industrial PC C5210, C63xx, C65xx, C69xx, CP22xx,CP26xx CP27xx, CP62xx, CP63xx or CP67xx, 8-pin connectors with Push IN connector and strain relief for the external power supply cables, instead of standard power supply connector
C9900-A219
PC without RAID configuration, instead of RAID1. Each storage medium inside the PC is a separate drive
|
Beckhoff Vietnam
|
C6930-1142-0060
|
Control cabinet Industrial PC customer-specific co. Lisec
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans, accessible from the front
- 5 cm (2") free space above and under the PC required for air circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C609
processor 6th generation Intel® Core™ i5-6500TE, 2.3 GHz,
4 cores (TC3:70), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-H700
solid-state disk SSD, SLC flash, 2½-inch, 32 GB
C9900-E237
additional DVI-D plug led out on a Module bracket
C9900-F965
Customized label for C6930 type "Beckhoff" material thickness 0,5 mm instead of 1,0 mm
FC9071-0000
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
C9900-B350
Specific BIOS for CB3064 in custom specific version for
co. Lisec, Lisec BIOS string and adapted boot order.
This BIOS will be updated after changes at the standard BIOS.
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
C9900-Y119
hard disk formatted as NTFS
Operating system Microsoft Windows Embedded Standard 7
will not be installed. License label is sticked on the housing.
|
Beckhoff Vietnam
|
C6930-1144-0060
|
Control cabinet Industrial PC customer-specific co. Desma
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C609
processor 6th generation Intel® Core™ i5-6500TE, 2.3 GHz,
4 cores (TC3:70), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R270
Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-S479
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, English, for industrial PCs with Intel® Celeron®,
Pentium®, Core™ i3 or Core™ i5 from the 4th generation
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S883
Acronis™ Backup, English, for PCs with at least 2 GB RAM,
can only be ordered together with a PC
|
Beckhoff Vietnam
|
C6930-1145-0060
|
Control cabinet Industrial PC customer-specific co. Desma
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C609
processor 6th generation Intel® Core™ i5-6500TE, 2.3 GHz,
4 cores (TC3:70), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R270
Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-S445
Microsoft Windows 7 Ultimate 64 bit, multilanguage, English
desktop active, further languages configurable.
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S883
Acronis™ Backup, English, for PCs with at least 2 GB RAM,
can only be ordered together with a PC
|
Beckhoff Vietnam
|
C6930-1146-0060
|
Control cabinet Industrial PC customer-specific co. CTMC
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-E276
CP-Link 4 Extender Tx PCIe module
- CP-Link 4 transmitter module for ex works installation in PCs with
PCIe module slots C5210, C65xx, C6925 or C6930
- 1 CP-Link 4 output with RJ 45 socket for up to 100 m CAT 6A cable
for connecting a Control Panel with CP-Link 4 interface
CP29xx-0010 or CP39xx-0010
- CP-Link 4 transfers USB 2.0 with 100 Mbit/s and DVI
- power supply for the Control Panel with connection of 24 V at
the Control Panel
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-S444
Microsoft Windows 7 Ultimate 32 bit, multilanguage, English
desktop active, further languages configurable
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
|
Beckhoff Vietnam
|
C6930-1147-0050
|
Control cabinet Industrial PC customer-specific co. Focke
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 1 free Mini PCI slot for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-H583
30 GB CFast card, 3D flash, extended temperature range
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
2x FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-I820
Windows 10 IoT Enterprise 2016 LTSB, 64 Bit, MBR, with one license for
One pc, for Industrial PCs with Intel® Core™ i7 of the 4th and 6th
generation, multilingual, type Focke, C6930-1147-0050
C9900-S885
Paragon® Backup & Recovery™ OEM Version, can only be ordered
together with a PC or Ethernet Control Panel
C9900-B347
Specific BIOS for CB3060 in customer-specific version company Focke,
password-protected BIOS, Passwort preset, boot order changed to 1st
HDD, 2nd SSD/CFast and others disabled.
This BIOS is fixed, no updates will be done.
C9900-S709
TwinCAT 3 Volume ID Branding, preinstalled on the IPC.
Only orderable for customer-specific devices
|
Beckhoff Vietnam
|
C6930-1148-0060
|
Control cabinet Industrial PC customer-specific co. G.D
GD SAP no. 25,31018000
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C608
processor 6th generation Intel® Core™ i3-6100TE, 2.7 GHz,
2 cores (TC3:60), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-H742
solid-state disk SSD, 3D flash, 2½-inch, 120 GB, instead of 2½-inch hard disk
C9900-H552
16 GB CFast card, SLC flash, extended temperature range
2x FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
FC9071-0000
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
C9900-S408
Image installed on the solid state disk
C9900-Z435
single packaging for every device of a delivery. price per device.
TX1250-0005
License for usage of TC2 NC PTP
License for one CPU. The Beckhoff software license agreements
are valid.
|
Beckhoff Vietnam
|
C6930-1149-0060
|
Control cabinet Industrial PC customer-specific co. G.D
G.D SAP no. 25,31018001
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R271
Memory extension to 16 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
C9900-H555
16 GB CFast card, SLC flash, extended temperature range, instead of
2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
FC9071
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
2x FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-Z435
single packaging for every device of a delivery. price per device.
|
Beckhoff Vietnam
|
C6930-1150-0060
|
Control cabinet Industrial PC customer-specific co. Veeco
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans,
accessible from the front
- 5 cm (2") free space above and under the PC required for air
circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x
4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C610
processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-R272
Memory extension to 32 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-E237
additional DVI-D plug led out on a Module bracket
C9900-S481
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, English, for industrial PCs with Intel® Core™ i7
from the 4th generation or Xeon®
|
Beckhoff Vietnam
|
C6930-1151-0060
|
Control cabinet Industrial PC custom specific co Salvagnini
Housing
- industrial PC for space-saving control cabinet installation
- mounting sheet at the rear wall
- all connectors on the front
- status LEDs
- lithium battery accessible behind the front flap
- 2 slots for 2½-inch hard disks or SSDs behind the front flap
- 1 slot for one CFast flash card behind the front flap
- 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led out interfaces of the motherboard ex factory
- fan cartridge with speed control and double ball bearing fans, accessible from the front
- 5 cm (2") free space above and under the PC required for air circulation
- protection class IP 20
- operating temperature 0…55 °C
- weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5" x 9.3" x 4.8") without mounting plate
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3, Core™ i5 or Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
C9900-C618
processor 7th Generation Intel® Core™ i3-7101(T)E, 3.4 GHz, 2 cores (TC3: 60), requires Windows 10 64 Bit,
instead of Intel® Celeron® G3900TE 2.3 GHz (TC3: 50)
C9900-R270
Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a 64 bit operating system.
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
C9900-H145
additional hard disk, 2½-inch, 320 GB
C9900-E237
additional DVI-D plug led out on a Module bracket
C9900-E301
RS232 PCIe module
- 2 serial interfaces RS232
- transfer rate up to 921.600 Bit/s
- 2 sockets ix industrial™ type B
- requires 2 adapter cable C9900-K920 ix industrail™ type B to D-Sub 9 pin
2x C9900-K920
adapter cable ix industrial™ type B to D-Sub 9 pin for C9900-E301 RS232 PCIe module, length 45 cm
C9900-S479
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch (LTSB), 64 bit, English, for industrial PCs with
Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 4th generation
|
Beckhoff Vietnam
|
C6930-1164-0050
|
Control cabinet Industrial PC “XTS optimized configuration”
Housing
– industrial PC for space-saving control cabinet installation
– mounting sheet at the rear wall
– all connectors on the front
– status LEDs
– lithium battery accessible behind the front flap
– 2 slots for 2½-inch hard disks or SSDs behind the front flap
– 1 slot for one CFast flash card behind the front flap
– 2 PCIe Module slots to plug-in Beckhoff PCIe Modules or to led
out interfaces of the motherboard ex factory
– fan cartridge with speed control and double ball bearing fans,
accessible from the front
– 5 cm (2") free space above and under the PC required for air
circulation
– protection class IP 20
– operating temperature 0…55 °C
– weight of the basic configuration 2.1 kg (4.6 lbs)
- compact dimensions (W x H x D) 90 x 235 x 121 mm (3.5“ x 9.3“ x
4.8“) without mounting plate
Features
– processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
– 1 free Mini PCI slot for cards installed ex factory
– 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I
connector
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
– hard disk, 2½-inch, 320 GB
– 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
– 24 V DC power supply
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
2x FC9062
Gigabit Ethernet PCIe Module for PCs with Beckhoff PCIe Module slots,
2-channel, PCI Express x1 bus
FC9071
Gigabit Ethernet PC network card 10/100/1000 MBit/s, 1 channel, PCIe
interface, occupies the connecting area of the Mini PCI card
C9900-S481
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, English, for industrial PCs with Intel® Core™ i7
from the 4th generation or Xeon®
C9900-M986
customer-specific print of the front and the module brackets
of the C6930-1106-0050, instead of standard print
C9900-F021
Customized label for C6930 type "Beckhoff - XTS",
with cutout for FC9071-0000
|
Beckhoff Vietnam
|
C9900-E125
|
Serial port inside a customer specific Control Panel
front, DIN 12 pin with screw-on cap IP65, with
adapter cable from DIN 12 pin to d-sub 9 pin
|
Beckhoff Vietnam
|
C9900-E131
|
Serial port and 1 PS/2 mouse port together inside one socket inside
the Control Panel backplane, DIN 12 pin with screw-on cap IP65, with
adapter cable from DIN 12 pin to d-sub 9 pin and on PS/2 mouse socket
|
Beckhoff Vietnam
|
C9900-E133
|
PS/2 mouse socket and PS/2 keyboard socket together inside one socket
inside the front of an Control Panel CP600x or CP700x, DIN 12 pin with
screw-on cap IP65, with adapter cable from DIN 12 pin to 2 PS/2
connectors
|
Beckhoff Vietnam
|
C9900-E134
|
PS/2 mouse port inside the front of a customer
specific Control Panels, DIN 12 pin with screw-on cap
IP65, with adapter cable from DIN 12 pin to PS/2 socket
|
Beckhoff Vietnam
|
C9900-E136
|
COM 3 and COM 4 of the motherboards configured as RS485/422 and
led out in two slot brackets with 2 D-Sub9 connectors in each bracket
|
Beckhoff Vietnam
|
C9900-E137
|
3 pin Wago socket strip in a slot bracket to connect the control
lines, with cables to the 24V PC power supply C9900-P208 or C9900-P209
|
Beckhoff Vietnam
|
C9900-E142
|
2 port USB socket inside the front of a customer specific Control
Panel, DIN 8 pin with screw-on cap IP65, with adapter cable from DIN 8
pin to 2 x USB
|
Beckhoff Vietnam
|
C9900-E144
|
COM 2 led out in one slot bracket with 2 D-Sub9 connectors;
the internal cable of the second D-Sub9 connector is available
inside the PC
|
Beckhoff Vietnam
|
C9900-E146
|
COM 4 of the motherboard configured as RS232 and led out with one
D-Sub9 connectors in one slot bracket
|
Beckhoff Vietnam
|
C9900-E153
|
COM 3 and COM 4 of the motherboards configured as RS485 and
led out in one slot bracket with 2 D-Sub9 connectors
|
Beckhoff Vietnam
|
C9900-E155
|
C9900-E155 cable C63xx-0010 slot aperture with 2xUSB, 1xCOM2
|
Beckhoff Vietnam
|
C9900-E156
|
COM 3 and COM 4 of the motherboards configured as RS485, terminator
off and led out in two slot brackets with 2 D-Sub9 connectors in
each bracket
|
Beckhoff Vietnam
|
C9900-E159
|
Serial port RS232, optically linked, overload protection,
D-sub 9-pin connector. An additional fieldbus card is possible with a
PCIe module slot as a connector bracket.
|
Beckhoff Vietnam
|
C9900-E188
|
Serial port RS485, optically linked, overload protection, D-sub 9-pin
connector.
An additional fieldbus card is possible with a PCIe module slot as a
connector bracket.
Configuration as an end point without echo: echo off, auto send on,
always send off, auto receive on, always receive off, termination on
|
Beckhoff Vietnam
|
C9900-E189
|
Serial port RS422, optically linked, overload protection,
D-sub 9-pin connector.
An additional fieldbus card is possible with a PCIe module slot as a
connector bracket.
Configuration as a full duplex end point: echo on, auto send off,
always send on, auto receive off, always receive on, termination on
|
Beckhoff Vietnam
|
C9900-E190
|
USB-A in the wiring area of a CP32xx or CP72xx for one USB 2.0 Port,
including covering cap IP 65
|
Beckhoff Vietnam
|
C9900-E193
|
Euchner Electronic Key System (EKS) for CP7903-1006 Kautex
|
Beckhoff Vietnam
|
C9900-E198
|
1 serial port RS232 from the motherboard wired to an internal slot
bracket with D-sub9 connector
|
Beckhoff Vietnam
|
C9900-E199
|
2 USB ports of the motherboard wired to an internal slot bracket
|
Beckhoff Vietnam
|
C9900-E209
|
module to optically link one serial RS232 port of the motherboard,
with overlaod protection, Dsub 9 connector, to be mounted inside of
slot bracket C9900-M568, C9900-M569 or inside a C66xx at the connector
bracket C9900-M571. A bracket is required.
|
Beckhoff Vietnam
|
C9900-E210
|
module to convert one serial RS232 port of the motherboard into RS485,
configured as an end point without echo, Dsub 9 connector, optically
linked, overlaod protection, to be mounted inside the slot brackets
C9900-M568, C9900-M569 or inside a C66xx at the connector
bracket C9900-M571. A slot bracket is required.
|
Beckhoff Vietnam
|
C9900-E211
|
module to convert one serial RS232 port of the motherboard into RS422,
configured as a full duplex end point, D-sub, 9-pin, optically
linked, overlaod protection, to be mounted inside the slot brackets
C9900-M568, C9900-M569 or inside a C66xx at the connector
bracket C9900-M571. A slot bracket is required.
|
Beckhoff Vietnam
|
C9900-E213
|
RFID reader for Legic transponder inside the front of a Panel-PC
CP7102, CP7202 or CP7702 or of a Control Panel CP7802 or CP7902,
integrated behind the front laminate, type of protection class IP 65,
connected internally via USB
|
Beckhoff Vietnam
|
C9900-E214
|
RFID reader for Legic transponder inside the front of a Panel-PC
CP7103, CP7203 or CP7703 or of a Control Panel CP7803 or CP7903,
integrated behind the front laminate, type of protection class IP 65,
connected internally via USB
|
Beckhoff Vietnam
|
C9900-E215
|
1 port USB socket inside the Control Panel or Panel PC backplane,
USB A socket with screw-on cap IP 65
|
Beckhoff Vietnam
|
C9900-E216
|
2 USB ports of the motherboard led out in the front of a C66xx
|
Beckhoff Vietnam
|
C9900-E219
|
Module to convert one serial RS232 port of the motherboard into RS485,
configured as an end point with echo, Dsub 9 connector, optically
linked, overload protection, to be mounted inside the slot brackets
C9900-M568 or C9900-M569. A slot bracket is required.
Configuration as an end point with echo: echo on, auto send on,
always send off, auto receive off, always receive on, termination on
|
Beckhoff Vietnam
|
C9900-E220
|
Module to convert one serial RS232 port of the motherboard into RS485,
configured as an drop point without echo, Dsub 9 connector, optically
linked, overload protection, to be mounted inside the slot brackets
C9900-M568 or C9900-M569. A slot bracket is required.
Configuration as an end point without echo: echo off, auto send on,
always send off, auto receive off, always receive on, termination off
|
Beckhoff Vietnam
|
C9900-E230
|
USB-A in the wiring area of a CP72xx for one USB 1.1 Port,
including covering cap IP 65
|
Beckhoff Vietnam
|
C9900-E265
|
1 port USB socket inside the Control Panel backplane CP790x-14xx
or in the Panel PC backplane CP770x-14xx,
1 port USB plug with stainless steel screw cap IP65
|
Beckhoff Vietnam
|
C9900-E266
|
RFID Multi reader for Legic or Mifare transponder inside the front of
A Panel-PC CP7102, CP7103, CP7202, CP7203, CP7702, CP7703 or of a
Control Panel CP7802, CP7803, CP7902, CP7903,
integrated behind the front laminate, type of protection class IP 65,
connected internally via USB, requires Windows Embedded Standard,
Windows XP Professional, Windows 7 or Windows 10 IoT Enterprise
|
Beckhoff Vietnam
|
C9900-E280
|
1 port USB plug with screw cap incl. connector cable 0.6 m with
USB-A connector
|
Beckhoff Vietnam
|
C9900-H112
|
PC without hard disk, instead of hard disk, 3½ inch, less price
|
Beckhoff Vietnam
|
C9900-H113
|
PC without hard disk, instead of 2½ inch hard disk, 320 GB, less price
|
Beckhoff Vietnam
|
C9900-H148
|
hard disk, 2½-inch, 320 GB, instead of 128 MB Compact Flash,
requires Windows Embedded Standard, Windows XP Professional
or Windows 7
|
Beckhoff Vietnam
|
C9900-H407
|
2 x hard disks 2½ inch 320 GB, instead of 1 x hard disk
3½ inch inside industrial PC C6240
|
Beckhoff Vietnam
|
C9900-I610
|
Windows Embedded Standard 7 [P] image with one license for one pc,
english,type GD, CP6202-1054-0050
|
Beckhoff Vietnam
|
C9900-K100-0006
|
Customized CP-Link coaxial cable with BNC connectors consist of:
15 m CP-Link cable (cable type Cellflex)
|
Beckhoff Vietnam
|
C9900-K100-0035
|
Customized Coax cable set male / male 20m consisting of:
2x 20m Aircell7 cable
|
Beckhoff Vietnam
|
C9900-K100-0036
|
Customized Coax cable set consisting of:
2x 1m Belden H155 cable
2x 50m Cellflex cable
2x 3m Belden H155 cable
|
Beckhoff Vietnam
|
C9900-K100-0044
|
Customized Coax cable set consisting of:
2x 0,6 m Belden H155
2x 30 m H2000 Flex
|
Beckhoff Vietnam
|
C9900-K100-0045
|
Customized Coax cable set consisting of:
2x 3m Aircell 7
2x 24m H2000 Flex
2x 3m Aircell 7
|
Beckhoff Vietnam
|
C9900-K100-0053
|
Customized Coax cable set consisting of:
2x 20m H2000 Flex
2x 12m H2000 Flex
2x 15m H2000 Flex
|
Beckhoff Vietnam
|
C9900-K100-0054
|
Customized Coax cable set male / male 25m consisting of:
2x 25m Aircell7 cable
|
Beckhoff Vietnam
|
C9900-K100-0055
|
Customized Coax cable set directly attachable, 53 m consisting of:
2x 50 m Cellfelx cable (male / male)
2x 3 m Belden H155 cable (male / female)
|
Beckhoff Vietnam
|
C9900-K100-0056
|
Customized Coax cable set consisting of:
2x 2 m Belden H155 cable (male / female)
2x 8 m Belden H155 cable (male / female)
|
Beckhoff Vietnam
|
C9900-K135
|
CP-Link coaxial cable Aircell7 on a roll,
price per meter
|
Beckhoff Vietnam
|
C9900-K138
|
CP-Link coaxial cable Cellflex on a roll,
price per meter
|
Beckhoff Vietnam
|
C9900-K187
|
BNC plug for Cellflex. Mounting requires option C9900-Z303
|
Beckhoff Vietnam
|
C9900-K189
|
BNC plug for Aircell7
|
Beckhoff Vietnam
|
C9900-K190
|
BNC adapter for connecting 2 CP-Link cables
|
Beckhoff Vietnam
|
C9900-K195
|
CP-Link coaxial cable customer specific with 1 x BNC plug and 1 x BNC
plug with BNC adapter for connecting 2 CP-Link cables length 8 m
(cable type Aircell 7)
|
Beckhoff Vietnam
|
C9900-K210
|
Cable for connecting CP903x, external touch screen and DIN keyboard
|
Beckhoff Vietnam
|
C9900-K211
|
Cable for connecting CP903x, external touch pad and DIN keyboard
|
Beckhoff Vietnam
|
C9900-K212
|
Cable for connecting CP903x, external touch screen and PS2 keyboard
|
Beckhoff Vietnam
|
C9900-K213
|
Cable for connecting CP903x, external touch pad and PS2 keyboard
|
Beckhoff Vietnam
|
C9900-K214
|
Cable for connecting CP903x, external touch screen
|
Beckhoff Vietnam
|
C9900-K215
|
Cable for connecting CP903x, external touch pad
|
Beckhoff Vietnam
|
C9900-K216
|
Cable for connecting CP903x, external PS2 keyboard 38 cm
|
Beckhoff Vietnam
|
C9900-K217
|
Cable for connecting CP903x, external DIN keyboard
|
Beckhoff Vietnam
|
C9900-K219
|
Cable for connecting CP903x, internal for additional keyboard socket
|
Beckhoff Vietnam
|
C9900-K222
|
Cable for connecting CP903x external touch screen and touch pad
|
Beckhoff Vietnam
|
C9900-K223
|
Cable for connecting CP903x external touch screen, PS2 mouse socket an
|
Beckhoff Vietnam
|
C9900-K224
|
Cable for connecting CP903x external touch pad, PS2 mouse socket and
PS2 keyboard
|
Beckhoff Vietnam
|
C9900-K225
|
Cable for connecting CP903x external touch screen, touch pad, PS2 mouse socket and PS2 keyboard
|
Beckhoff Vietnam
|
C9900-K226
|
Cable for connecting CP903x external PS2 keyboard 21 cm
|
Beckhoff Vietnam
|
C9900-K227
|
Cable for connecting CP903x external serial socket, PS2 touch pad and
PS2 keyboard
|
Beckhoff Vietnam
|
C9900-K228
|
Cable for connecting CP903x external PS2 touch pad and PS2 keyboard
|
Beckhoff Vietnam
|
C9900-K229
|
Adapter cable PS/2 plug to DIN socket 5 pin, length 10cm
|
Beckhoff Vietnam
|
C9900-K230
|
Adapter cable DIN 12 pin screw-on plug to d-sub 9 pin
for the serial port at the Control Panel
|
Beckhoff Vietnam
|
C9900-K231
|
DIN 5 pin screw-on plug for keyboards
|
Beckhoff Vietnam
|
C9900-K232
|
Adapter cable DIN 5 pin screw-on plug to PS/2 keyboard socket
|
Beckhoff Vietnam
|
C9900-K233
|
Adapter cable DIN 8 pin screw-on plug to 2 x USB
|
Beckhoff Vietnam
|
C9900-K234
|
Adapter cable DIN 12 pin screw-on plug to RS232
|
Beckhoff Vietnam
|
C9900-K235
|
Adapter cable DIN 12 pin screw-on plug to RS232 and PS/2 mouse
|
Beckhoff Vietnam
|
C9900-K236
|
Adapter cable DIN 12 pin screw-on plug to PS/2 mouse
|
Beckhoff Vietnam
|
C9900-K237
|
DIN 12 pin screw-on plug for serial port
|
Beckhoff Vietnam
|
C9900-K238
|
Serial cable from DIN 12 pin to DIN 12 pin for Control Panel with
trackball inside the tool board, cable with screw-on plugs, length
70 cm
|
Beckhoff Vietnam
|
C9900-K247
|
Adapter cable DIN 12 pin screw-on plug to d-sub 9 pin female plug,
length 3 m
|
Beckhoff Vietnam
|
C9900-K249
|
Adapter cable DIN 12 pin screw-on plug to RS232 female connector,
length 1.5m
|
Beckhoff Vietnam
|
C9900-K260
|
Connecting kit for C9900-A174 containing DVI cable 0,40 m,
USB cable 0,40 m
|
Beckhoff Vietnam
|
C9900-K261
|
Connecting kit for C9900-A172 containing DVI cable 1,00 m,
USB cable 1,00 m and power supply connector
|
Beckhoff Vietnam
|
C9900-K352
|
cable C6140 Conti CD-ROM 40--pin, length 55cm
|
Beckhoff Vietnam
|
C9900-K354
|
Connecting kit for an additional SATA hard disk.
Including a 40 cm SATA data cable, locked on both sides,
and an adapter cable from 5¼ inch power supply connector to SATA
power supply connector
|
Beckhoff Vietnam
|
C9900-K355
|
Adapter cable from 5¼ inch power supply connector to SATA power
supply connector, length 10 cm (4”)
|
Beckhoff Vietnam
|
C9900-K356
|
Power supply cable 115 V US version, IEC power connector C13 to
NEMA-5 plug (type-B), AWG18x3C, length 1.8 m, black
|
Beckhoff Vietnam
|
C9900-K357
|
Adapter cable from 5¼ inch power supply connector to angled SATA power
supply connector, length 15 cm (6"), latching nose outside
|
Beckhoff Vietnam
|
C9900-K359
|
Adapter cable from 5¼ inch power supply connector to angled SATA power
supply connector, length 15 cm (6"), latching nose inside
|
Beckhoff Vietnam
|
C9900-K430
|
Power supply cable for Industrial PC with 5 pin Wago connector,
115 V US version
|
Beckhoff Vietnam
|
C9900-K432
|
Power supply cable for Industrial PC CP71xx, 24 V, length 0.6 m
|
Beckhoff Vietnam
|
C9900-M122
|
Mounting arm adapter plate at the Control Panel CP70xx with
CP-Link interface for mounting arm system Rittal CP6206.400,
CP6206.420, CP6527.000 and CP6529.000, mounting arm from bottom,
wiring through the mounting arm
|
Beckhoff Vietnam
|
C9900-M134
|
Mounting arm adapter plate at the Control Panel CP70xx with
CP-Link interface for mounting arm system VESA FPMPMI
distance of holes 100 x 100 mm, wiring via the backplane
|
Beckhoff Vietnam
|
C9900-M135
|
Mounting arm adapter plate at the Control Panel CP70xx for mounting
arm system Rittal CP6206.490, mounting arm from top or bottom,
cable installation through the mounting arm
|
Beckhoff Vietnam
|
C9900-M187
|
Push button extension for CP3215-1023/CP3215-1024/CP3221-1090
- 25 holes for mounting instruction elements
- Integrated cable gland M20 and M32
|
Beckhoff Vietnam
|
C9900-M203
|
Mounting arm adapter plate with a cable pit centrically attached
at the Control Panel with push-button extension CP7842 or CP7942
for mounting arm system Rose GTN 49.477300 instead of Rolec Tara Plus
mounting arm from top, wiring through the mounting arm,
2-port USB interface on the side with screw cap IP 65
|
Beckhoff Vietnam
|
C9900-M204
|
Mounting arm adapter plate with a cable pit centrically attached
at the Control Panel with push-button extension CP7842 or CP7942
for mounting arm system Rose GTN 49.477300 instead of Rolec Tara Plus
mounting arm from bottom, wiring through the mounting arm,
2-port USB interface on the side with screw cap IP 65
|
Beckhoff Vietnam
|
C9900-M206
|
Mounting arm adapter plate with a cable pit centrically attached
at the Control Panel CP78xx or CP79xx with push-button
extension for mounting arm system Rittal CP6206.490 instead of
Rolec Tara Plus. Mounting arm from top or bottom, wiring through the
mounting arm with circular plug-in connector in the wiring area of
the mounting arm adapter plate
|
Beckhoff Vietnam
|
C9900-M320
|
Stand for Control Panel CP7xxx without push button extension.
With adjustable angle for installation of a Control Panels on a table
(Can only be ordered together with the Control Panel)
|
Beckhoff Vietnam
|
C9900-M540
|
Vibration absorbing plate for C6140
|
Beckhoff Vietnam
|
C9900-M628
|
Removable frame for a 2.5 inch SSD
|
Beckhoff Vietnam
|
C9900-M629
|
Removable frame for a 2.5 inch SSD, instead of a removable frame
for a 3.5 inch hard disk
|
Beckhoff Vietnam
|
C9900-M635
|
MICSY C6250-0020 fastening plate vertical
|
Beckhoff Vietnam
|
C9900-M636
|
mounting sheet at C6250 for vertical PC installation, instead of
Mounting sheet for horizontal PC installation, drives on bottom of
the PC
|
Beckhoff Vietnam
|
C9900-M639
|
mounting sheet at C6240 for vertical PC installation, instead of
Mounting sheet for horizontal PC installation, slots in the lower
half of the PC
|
Beckhoff Vietnam
|
C9900-M640
|
Lock and holder for locking the front plate of C61xx,
mountable even after the PC is installed
|
Beckhoff Vietnam
|
C9900-M642
|
Mounting plate for C6916 with mounting hole measures of the C6925,
instead of standard mounting plate
|
Beckhoff Vietnam
|
C9900-M644
|
Removable frame for a 3½ inch hard disk installed into the middle 5¼ inch drive slot.
|
Beckhoff Vietnam
|
C9900-M645
|
Removable frame for a 2½ inch hard disk installed into the middle 5¼ inch drive slot.
|
Beckhoff Vietnam
|
C9900-M655
|
mounting plate for CP6500-1003 with drill holes like C6140
|
Beckhoff Vietnam
|
C9900-M656
|
MICSY C63xx-00xx flange plate sidewise
|
Beckhoff Vietnam
|
C9900-M660
|
Mounting plate for C6240-1007-00xx, 110-230V version,
dimension: 345x426 (w x h), plug flat upside
|
Beckhoff Vietnam
|
C9900-M662
|
Mounting plate for C6640 with mounting hole measures of the C6140
|
Beckhoff Vietnam
|
C9900-M663
|
Mounting plate for C6240 for vertical PC installation,
Slots in the lower half of the pc
|
Beckhoff Vietnam
|
C9900-M720
|
Special housing C6150 with 2 hard disks accessible
from front, instead of standard housing C6150
|
Beckhoff Vietnam
|
C9900-M911
|
Extension module C9900-M923
- aluminium housing, protection class IP 65
- 23 keys identified by slide-in labels
- status indication by red or green ambient illumination of each key
- 5 digital 24V inputs, connection over 12 pin connector in the
backplane
- emergency stop button, two circuits, connection over 12 pin
connector in the backplane
- emergency stop feedback, connection over EtherCAT
- operating temperature 0 to 55 °C
- for mounting 4 front-lateral throughholes Ø 4,2 mm
- Push buttons and LEDs are transmitted via EtherCAT
|
Beckhoff Vietnam
|
C9900-M912-1001
|
C9900-M912-1001 keypad module Sig
|
Beckhoff Vietnam
|
C9900-M921
|
Front laminate with 45 buttons and LEDs. Push buttons with slide in
labels.
emergency stop
3 electromechanic buttons
Graycode button T=17
Graycode button T=23
Push buttons and LEDs are transmitted via EtherCAT
operating temperature 0 to 50 °C
|
Beckhoff Vietnam
|
C9900-M928
|
C61xx drive frame for a hard disk or a floppy disk
drive
|
Beckhoff Vietnam
|
C9900-M968
|
Extension module C9900-M968
- housing for 2 push-buttons and 1 emergency stop with a 22mm hole
- prepared for RFID reader for Mifare transponder with connection
cable
- 1 port USB socket with connection cable
|
Beckhoff Vietnam
|
C9900-P311
|
Redundant power supply 100-240 V DC/DC type Zippy EMRW-5450V4V,
instead of standard power supply
|
Beckhoff Vietnam
|
C9900-P313
|
Redundant ATX power supply for C5102 and C5240, 100-240 V AC, 450 W,
instead of standard power supply
|
Beckhoff Vietnam
|
C9900-P911
|
Power supply connector for Industrial PC, plug with
strain relief housing for the external power supply
cable
|
Beckhoff Vietnam
|
C9900-P913
|
Power supply connector for Industrial PC, plug with
strain relief for the externale power supply cable
with label 230 V
|
Beckhoff Vietnam
|
C9900-P914
|
Power supply connector for Industrial PC, plug with
strain relief for the externale power supply cable
with label 24 V and battery
|
Beckhoff Vietnam
|
C9900-P915
|
Power supply connector 90° angled for Industrial PC, plug with strain
relief for the externale power supply cable with label 100-240 V
|
Beckhoff Vietnam
|
C9900-P917
|
Power supply connector for Industrial PC, plug with strain relief for
the externale power supply cable with label 24 V
|
Beckhoff Vietnam
|
C9900-P918
|
Power supply connector for built-in Control Panel, plug with strain
relief for the externale power supply cable with label 24 V
|
Beckhoff Vietnam
|
C9900-P921
|
Power supply connector for Industrial PC C63xx, 2 5-pin connectors
with strain relief for the external power supply cables
|
Beckhoff Vietnam
|
C9900-P922
|
Power signal connector for Industrial PC, 3-pin connector relief for
the external power signal cable (PC-ON, PWR-Status)
|
Beckhoff Vietnam
|
C9900-P926
|
Power supply connector for Industrial PC C5210, C63xx, C65xx, C69xx, CP22xx, CP27xx, CP62xx, CP63xx or CP67xx, 8-pin connector
with strain relief for the external power supply cables.
|
Beckhoff Vietnam
|
C9900-P927
|
Power supply connector for "Economy" built-in Control Panel CP69xx,
"Economy" built-in Panel PC CP66xx or Multitouch built-in Control
Panel CP29xx, 5-pin connector with strain relief for the external
power supply cable
|
Beckhoff Vietnam
|
C9900-P928
|
Power supply connector 90° angled for Industrial PC CP71xx with Intel®
Celeron® M/Pentium® M or higher, plug for the externale power supply
cable with label 24 V and battery
|
Beckhoff Vietnam
|
C9900-P929
|
C9900-P929 power supply connector 90° angled for industrial PC CP71xx with Intel® Celeron® M/Pentium® M or higher, plug for the externale power supply cable with label 24 V
|
Beckhoff Vietnam
|
C9900-P931
|
Power supply connector for Industrial PC C69xx or CP62xx, C63xx,
8-pin connectors with tension clamp contact, with strain relief, for
the external power supply cables
|
Beckhoff Vietnam
|
C9900-P932
|
Power supply connector for CP6616, 3-pin connector with screw clamp
contact, for the external Power supply cables
|
Beckhoff Vietnam
|
C9900-P944
|
Power supply connector for CU8xxx and external backplane box
C9900-E249/E250/E251, 3-pin connector with tension clamp contact,
for the external power supply cables
|
Beckhoff Vietnam
|
C9900-S318
|
No operating system, instead of Microsoft Windows CE 6 or
Windows Embedded Compact 7
|
Beckhoff Vietnam
|
C9900-S412
|
Microsoft Windows 2003, server, 5 clients, German
|
Beckhoff Vietnam
|
C9900-S413
|
Microsoft Windows 2003, server, 5 clients, English
|
Beckhoff Vietnam
|
C9900-S416
|
Microsoft Windows Embedded Standard 7, single-language, German,
single finger touch screen support, not available for PCs with
4th Generation Intel© Core™ i processor and Intel® Atom™ E38xx
|
Beckhoff Vietnam
|
C9900-S419
|
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
|
Beckhoff Vietnam
|
C9900-S420
|
Microsoft Windows Server 2000 USER CAL, 5 clients
|
Beckhoff Vietnam
|
C9900-S421
|
Microsoft Windows Server 2003 USER CAL, 5 clients
|
Beckhoff Vietnam
|
C9900-S423
|
License for 5 additional Microsoft Windows Server 2008 clients
|
Beckhoff Vietnam
|
C9900-S424
|
Microsoft Windows Embedded Standard 7, 64 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
|
Beckhoff Vietnam
|
C9900-S430
|
Microsoft Windows Server 2008 R2, 64 Bit, 5 clients, german.
Does not support PCI or MiniPCI Ethernet cards. PCI-Express Ethernet
cards are supported. For example FC9022 or FC9062
|
Beckhoff Vietnam
|
C9900-S431
|
Microsoft Windows Server 2008 R2, 64 Bit, 5 clients, english.
Does not support PCI or MiniPCI Ethernet cards. PCI-Express Ethernet
cards are supported. For example FC9022 or FC9062
|
Beckhoff Vietnam
|
C9900-S434
|
Microsoft Windows Server 2008 Remote Desktop Services, 5x USER CAL
|
Beckhoff Vietnam
|
C9900-S527
|
Microsoft Windows CE 6 for TwinCat 2.10, instead of Microsoft Windows
CE 5. In the Ethernet Panel CP66xx the available free storage space
will be reduced to approximately 3 MB.
|
Beckhoff Vietnam
|
C9900-S528
|
Microsoft Windows CE 6 for TwinCat 2.11, instead of Microsoft Windows
CE 5. In the Ethernet Panel CP66xx the available free storage space
will be reduced to approximately 3 MB.
|
Beckhoff Vietnam
|
C9900-S700, bis CBxx56
|
Driver CD / DVD for Beckhoff Industrial PCs
|
Beckhoff Vietnam
|
C9900-S832
|
Winzip 8, English
|
Beckhoff Vietnam
|
C9900-S845
|
Virus scan software McAfee Virusscan, English
|
Beckhoff Vietnam
|
C9900-S846
|
Virus scan software McAfee Virus Scan Plus
|
Beckhoff Vietnam
|
C9900-S876
|
Acronis™ True image, English, for Windows XP and
Windows Embedded Standard 2009, can only be ordered together with
a PC or Ethernet Control Panel. Suitable for 32 bit PCs
(= PCs with DDR-RAM or DDR2RAM).
|
Beckhoff Vietnam
|
C9900-S877
|
Acronis™ True image Home 2010, English, for Windows XP Professional,
Windows Embedded Standard 2009 and Windows 7, can only be ordered
together with a PC or Ethernet Control Panel
|
Beckhoff Vietnam
|
C9900-S878
|
Acronis™ Backup & Recovery, English, for Windows XP, Windows 7 and
Windows Embedded Standard, can only be ordered together with
a PC.
|
Beckhoff Vietnam
|
C9900-S879
|
Acronis™ Backup & Recovery Advanced Workstation inclusive Universal
Restore and Deduplication, English, for Windows XP, Windows 7 and
Windows Embedded Standard, can only be ordered together with
a PC. Suitable for 64 bit PCs (= PCs with DDR3-RAM), even with 32 bit
Windows. Customer specific version for co Conti
|
Beckhoff Vietnam
|
C9900-S880
|
Acronis Backup (Advanced) 11.7, English for Windows XP, Windows 7, Windows 10
and Windows Embedded Standard, only available together with a PC.
Suitable for 64-bit PCs (= PCs with DDR4 RAM), even with 32-bit Windows
|
Beckhoff Vietnam
|
C9900-S884
|
Recovery Media MS-WIN 7, DVD-9, can only be ordered together with a PC
|
Beckhoff Vietnam
|
C9900-S885
|
Paragon® Backup & Recovery™ OEM Version, can only be ordered
together with a PC or Ethernet Control Panel
|
Beckhoff Vietnam
|
C9900-T121
|
Keyboard shelf with integrated trackball,
RS232 connector, 2 keys at the side, IP65 static
Deliverable for: CP7x21-0000 + CP7x21-0001 with push-button extension,
CP7x31-0000 + CP7x31-0001 with push-button extension
|
Beckhoff Vietnam
|
C9900-T201
|
Adhesive protection film for Control Panels and PCs with 6.5" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T203
|
Adhesive protection film for Control Panels and PCs with 12" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T204
|
Adhesive protection film for Control Panels and PCs with 15" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T205
|
Adhesive protection film for Control Panels and PCs with 19" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T206
|
Adhesive protection film for Control Panels and PCs with 24" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T207
|
Adhesive protection film for Control Panel CP6022-0001
plastic foil for gluing onto the foil keyboard
5 pieces
|
Beckhoff Vietnam
|
C9900-T208
|
Adhesive protection film for Control Panel CP6032-0001
plastic foil for gluing onto the foil keyboard
5 pieces
|
Beckhoff Vietnam
|
C9900-T209
|
Adhesive protection film for Control Panel with 5.7" display,
plastic foil for gluing onto the glass screen or the touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T210
|
Adhesive protection film for Control Panels and PCs with 6.5" display,
plastic foil for gluing onto the glass screen or the touch screen,
1 foil mounted ex factory, further 4 pieces included in the delivery
|
Beckhoff Vietnam
|
C9900-T211
|
Adhesive protection film for Control Panels and PCs with 12" display,
plastic foil for gluing onto the glass screen or the touch screen,
1 foil mounted ex factory, further 4 pieces included in the delivery
|
Beckhoff Vietnam
|
C9900-T212
|
Adhesive protection film for Control Panels and PCs with 15" display,
plastic foil for gluing onto the glass screen or the touch screen,
1 foil mounted ex factory, further 4 pieces included in the delivery
|
Beckhoff Vietnam
|
C9900-T213
|
Adhesive protection film for Control Panels and PCs with 19" display,
plastic foil for gluing onto the glass screen or the touch screen,
1 foil mounted ex factory, further 4 pieces included in the delivery
|
Beckhoff Vietnam
|
C9900-T214
|
Adhesive protection film for Control Panels and PCs with 24" display,
plastic foil for gluing onto the glass screen or the touch screen,
1 foil mounted ex factory, further 4 pieces included in the delivery
|
Beckhoff Vietnam
|
C9900-T215
|
Adhesive protection film for Control Panels and PCs with 5,7" display,
plastic foil for gluing onto the glass screen or the touch screen,
1 foil mounted ex factory, further 4 pieces included in the delivery
|
Beckhoff Vietnam
|
C9900-T236
|
Adhesive protection film for Control Panels and PCs CP6201-0001,
CP6601-0001, CP6701-0001-0040/0050, CP6901-0001 with stainless steel
front and with flush-mounted touch screen 12 inch.
Plastic foil for gluing onto the front-foil and touch screen,
5 pieces
|
Beckhoff Vietnam
|
C9900-T328
|
Customer specific touch screen firmware, company Trumpf, for 19"
multitouch Control Panel and Panel PCs with palm and thumb rejection
at the left 3cm ot the tocuh screen
|
Beckhoff Vietnam
|
C9900-Z127
|
PC compact keyboard Cherry G84-4400 with trackball, US layout,
USB connector
|
Beckhoff Vietnam
|
C9900-Z190
|
PC standard keyboard, German layout, screwable DIN
connector
|
Beckhoff Vietnam
|
C9900-Z192
|
PC standard keyboard, English layout, screwable DIN
connector
|
Beckhoff Vietnam
|
C9900-Z193
|
PC standard keyboard, French layout, screwable DIN
connector
|
Beckhoff Vietnam
|
C9900-Z195
|
PC standard keyboard, Spanish layout, screwable DIN
connector
|
Beckhoff Vietnam
|
C9900-Z198
|
Numeric keyboard mit PS/2 connector, 21 keys
|
Beckhoff Vietnam
|
C9900-Z227
|
Cassette with fan for C6920/C6930 housing, silent
During operation of the Beckhoff C69xx Industrial PC with the fan
cassette C9900-Z227/Z228, the air throughput of the device is reduced
to create a quieter operating sound.
Beckhoff Automation GmbH & Co. KG is delivering the combination of
C69xx and C9900-Z227/Z228 at the express request of the customer and
declines the guarantee for damage resulting from this operating mode
|
Beckhoff Vietnam
|
C9900-Z228
|
Cassette with fan for C6920/C6930 housing, silent, instead of
regular cassette with fan
During operation of the Beckhoff C69xx Industrial PC with the fan
cassette C9900-Z227/Z228, the air throughput of the device is reduced
to create a quieter operating sound.
Beckhoff Automation GmbH & Co. KG is delivering the combination of
C69xx and C9900-Z227/Z228 at the express request of the customer and
declines the guarantee for damage resulting from this operating mode
|
Beckhoff Vietnam
|
C9900-Z263
|
Hook wrench size 58-62, for tying up the slotted nut of the CP32xx,
CP37xx and mounting arm adapter C9900-M75x
|
Beckhoff Vietnam
|
C9900-Z352
|
Push-Button PCB A013, 1x NO, 1x NC + LED
- Contact for RAFI RAFIX FS+
- 1x NO contact max. 24V / 100mA
- 1x NC contact max. 24V / 100mA
- 1x LED white, 24V with fiber optics
- Connection 1x 6 pin, Wago , male
- Connector 1x 6 pin, Wago, female
|
Beckhoff Vietnam
|
C9900-Z353
|
Push-Button PCB A971, 2x NC for emergency stop
- Contact for RAFI RAFIX FS+
- 2x NC contact max. 24V / 100mA
- Connection 1x 6 pin, Wago , male
- Connector 1x 6 pin, Wago, female
|
Beckhoff Vietnam
|
C9900-Z400
|
Spacer plate for Rittal adapter CP6508.0020, 46 mm thick
|
Beckhoff Vietnam
|
C9900-Z401
|
Spacer plate for Rittal adapter CP6206.480 compatible for
CP7901-1097-0000
|
Beckhoff Vietnam
|
C9900-Z405
|
mounting arm adapter plate for Rittal CP6508.020 up/down
TRSE material thickness 24mm
|
Beckhoff Vietnam
|
C9900-Z406
|
Stainless steel cover for mounting arm adapter C9900-M761
|
Beckhoff Vietnam
|
CA8030-1012
|
Customer-specific assembly for motherboard CB3060, Co. ADL
Poliscan PC SBC 3,5" QM87F 2000E
- Intel® Celeron® 2000E Dual Core 2,2 GHz
- 4 GB DDR3L RAM
- SSD 2,5" 30 GB MLC-Flash Slim SATA
- SSD 2,5" 240 GB MLC-Flash Slim SATA
- 4x Gigabit Ethernet LAN Modul
- COM-Ports 2/3/4
- Rattler Firewall
- temperature range -25°C bis +65°C
Vitronic part number: 142828R002
|
Beckhoff Vietnam
|
CA8030-1014
|
Customer-specific assembly for motherboard CB3060, Co. ADL
Poliscan QM87 flach 4400E 8GB
- Intel® Celeron® 4400E Dual Core 2,7 GHz
- 8 GB DDR3L RAM
- SSD 2,5" 30 GB MLC-Flash Slim SATA
- SSD 2,5" 240 GB MLC-Flash Slim SATA
- 4x Gigabit Ethernet LAN Modul
- COM-Ports 2/3/4
- Rattler Firewall
- temperature range -25°C bis +65°C
Vitronic part number: 147618R001-PC
|
Beckhoff Vietnam
|
CA8040-1012
|
Customer-specific assembly for motherboard CB4063
for customer Ivoclar, Austria
CB4063 PC/104 Industrial Motherboard
- CPU type: Intel® Atom™ E3845, 1,91 GHz
- Memory: Type: SODIMM204-1.35V / DDR3L
- Graphic: CPU integrated, up to 512MB DVMT
- Dimensions: (W x D x H) 90 mm x 24 mm x 96 mm
C9900-R262
memory Module DDR3L-RAM SO-DIMM, 1600 MT/s, 4096 MB
C9900-S419
Microsoft Windows 10 IoT Enterprise, Long Term Servicing Branch
(LTSB), 64 bit, German, for industrial PCs with Intel® Atom™ E38xx
C9900-A311
adaption board CFast for C6525 and slot bracket
C9900-H583
30 GB CFast card, 3D flash, extended temperature range
TC1270-0000-0001
Customer specific TC3 Bundle | Company Ivoclar
TC1270-0050 TC3 PLC, NC PTP 10, NC I, CNC
TF5240-0050 TC3 CNC Transformation
TF5250-0050 TC3 CNC HSC Pack
TF5260-0050 TC3 CNC Spline Interpolation
License to use a CNC path control software
- Spline functionality
License for one CPU.
|
Beckhoff Vietnam
|
CP2212-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch display 800 x 600
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2212-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch display 800 x 600
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2213-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12.1 inch display 1280 x 800
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2213-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12.1 inch display 1280 x 800
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2215-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch display 1024 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2215-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch display 1024 x 768
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2215-1007-0010
|
Multitouch Built-in Panel PC CP2215-1007-0010
housing
- aluminium housing black anodized with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch display 1024 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-D191 PC with 2 slots for 2½-inch hard disks or SSDs,
instead of 1 slot for a hard disk or SSD and 1 slot for CFast
- C9900-H742 solid-state disk SSD, 3D MLC Flash, 2½-inch, 120 GB,
instead of 2½-inch hard disk
- C9900-H741 solid-state disk SSD, 3D MLC Flash, 2½-inch, 120 GB
For applications with very high read and write cycles SSD with SLC
flash are recommended. SSD with MLC flash do have a low life
expectation for write-and-deletion cycle. It is possible that SSD
with MLC flash are at their natural end of life after a short term
with a high volume of write-and-deletion cycle. Furthermore it is
unknown how the utilization of MLC flash in industrial environment
influences the life expectation.
|
Beckhoff Vietnam
|
CP2215-1015-0010
|
Multitouch Built-in Panel PC CP2215-1015-0010
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch display 1024 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- C9900-F861 Aluminum frame with customer specific imprint type
"Jendamark", 3 colors, instead of imprint Beckhoff
- C9900-C563 processor 4th Generation Intel® Core™ i5 4400E, 2.7 GHz,
2 cores (TC3:70), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)-
- C9900-R258 memory extension to 8 GB DDR3L RAM, instead of 2 GB
- C9900-S443 Microsoft Windows 7 Professional 64 Bit, englisch
- C9900-U209 uninterruptible power supply UPS, integrated into the
24 V power supply, without battery, occupies one internal serial
interface
|
Beckhoff Vietnam
|
CP2215-1016-0020
|
Multitouch Built-in Panel PC CP2215-1016-0020
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch display 1024 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
- C9900-F861 Aluminum frame with customer specific imprint type
"Jendamark", 3 colors, instead of imprint Beckhoff
- C9900-C609 processor 6th generation Intel® Core™ i5-6500TE,
2.3 GHz, 4 cores (TC3:70), instead of
Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
- C9900-R270 Memory extension to 8 GB DDR4 RAM, instead of 4 GB
- C9900-S443 Microsoft Windows 7 Professional 64 Bit, englisch
- C9900-U209 uninterruptible power supply UPS, integrated into the
24 V power supply, without battery, occupies one internal serial
interface
|
Beckhoff Vietnam
|
CP2215-1017-0020
|
Multitouch Built-in Panel PC CP2215-1017-0020
Kampf ID-Nr.: 882116568
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch display 1024 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
- C9900-F860 Aluminum frame for Multi-touch built-in Panel PC or
Multi-touch built-in Control Panel CP2x15-00x0, landscape, with
customer specific imprint type "Kampf", monochrome, instead of
imprint Beckhoff
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
- C9900-S479 Microsoft Windows 10 IoT Enterprise, Long Term
Servicing Branch(LTSB), 64 bit, English, for industrial PCs
with Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 4th
generation
|
Beckhoff Vietnam
|
CP2216-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2216-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2216-1009-0010
|
Multitouch Built-in Panel PC CP2216-1009-0010
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- splinter protection laminated on touch screen full surface
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
- C9900-H725 solid-state disk SSD, MLC flash, 2½-inch, 128 GB,
instead of 2½-inch hard disk.
For applications with very high read and write cycles SSD with
SLC flash are recommended. SSD with MLC flash do have a low life
expectation for write-and-deletion cycle. It is possible that SSD
with MLC flash are at their natural end of life after a short term
with a high volume of write-and-deletion cycle. Furthermore it is
unknown how the utilization of MLC flash in industrial environment
influences the life expectation.
- C9900-S443 Microsoft Windows 7 Professional 64 bit, English.
Does not support PCI or MiniPCI Ethernet cards. PCI-Express
Ethernet cards are supported. For example FC9022 or FC9062
|
Beckhoff Vietnam
|
CP2216-1014-0010
|
Multitouch Built-in Panel PC
Karl Mayer material number: ???
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core¿ i3,
Core¿ i5, Core¿ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- rear printing on the non-active area of the multi-finger touchscreen
in Beckhoff Standard "Haverhill Grey" (similar to RAL 7016)
- C9900-F882 Touch screen with customer specific imprint type
"Kamcos", monochrome
- C9900-E268 1 port USB socket inside the, USB-A with protection
cap IP65
- pull-out clamping levers for fast installation without loose parts
- earth connection on the housing
- C9900-H554 8 GB CFast card, SLC flash, extended temperature range,
instead of 2½-inch hard disk
- C9900-I586 Windows Embedded Standard 7 [P] image with one license
for one pc, English, type Karl Mayer
- TC1250-0000-0008
Customer specific TC3 Volume-license | Company Karl Mayer
- TC1250-0090 TC3 PLC/NC PTP 10
- TC1320-0090 TC3 C++/Matlab/Simulink
- TF5010-0090 TC3 NC PTP Axes Pack 25
- TF5020-0090 TC3 NC PTP Axes Pack unlimited
- TF5050-0090 TC3 NC Camming
- TF5065-0090 TC3 Motion Control XFC
- TF6100-0090 TC3 OPC UA
- TF6421-0090 TC3 XML Server
- TF6310-0090 TC3 TCP/IP
License for one CPU. Valid only on CP2216-1014-0010,
CP2711-1001-0010 or CP2716-1008-0010.
The license agreements for Beckhoff software products apply.
|
Beckhoff Vietnam
|
CP2216-1024-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- C9900-F762 without logo imprint on the aluminium frame
- C9900-I798 Windows 7 professional 64 Bit image with one license
for one pc, english, type Global Hydro, CP2216-0010
- C9900-R258 memory extension to 8 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-H750 solid-state disk SSD, 3D MLC Flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
|
Beckhoff Vietnam
|
CP2216-1025-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- C9900-F762 aluminum frame without logo imprint "Beckhoff"
- C9900-R258 memory extension to 8 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system
- C9900-H749 solid-state disk SSD, 3D flash, 2½-inch, 240 GB
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
- C9900-D191 2 slots for 2½-inch hard disks or SSDs,
instead of 1 slot for a hard disk or SSD and 1 slot for CFast
- C99900-S443 Microsoft Windows 7 Professional 64 Bit, english
- C9900-I798 Windows 7 professional 64 Bit image with one license
for one pc, english, type Global Hydro, CP2216-0010
|
Beckhoff Vietnam
|
CP2216-1029-0020
|
Multitouch Built-in Panel PC
Karl Mayer material number: 4200136836
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
- C9900-C609 processor 6th generation Intel® Core™ i5-6500TE, 2.3 GHz,
4 cores (TC3:70), instead of Intel® Celeron® G3900TE 2.3 GHz
(TC3:50)
- C9900-E268 1 port USB 2.0 socket inside the front of a CP2xxx
without, push button extention, USB-A with protection cap IP65
- C9900-F882 Touch screen with customer specific imprint type
"Kamcos", monochrome
- FC9071-0000 Gigabit Ethernet PC network card 10/100/1000 MBit/s,
1 channel, PCIe interface, occupies the connecting area of the
Mini PCI card
- C9900-H554 8 GB CFast card, SLC flash, extended temperature range,
instead of 2½-inch hard disk, less price
- TC1250-0000-0008 Customerspecific TC3 Volume-Bundle |
Company Karl Mayer
TC1250-0090 TC3 PLC/NC PTP 10
TC1320-0090 TC3 C++/Matlab/Simulink
TF5010-0090 TC3 NC PTP Axes Pack 25
TF5020-0090 TC3 NC PTP Axes Pack unlimited
TF5050-0090 TC3 NC Camming
TF5065-0090 TC3 Motion Control XFC
TF6100-0090 TC3 OPC UA
TF6421-0090 TC3 XML Server
TF6310-0090 TC3 TCP/IP
TF6340-0090 TC3 Serial-Communication
License for one CPU. The Beckhoff software license agreements
are valid.
- C9900-B355 customised BIOS
- C9900-I818 Windows Embedded Standard 7 [P], 32 Bit, MBR, image with
one License for one pc, multilingual,type Karl Mayer,
CP2216-1029-0020
|
Beckhoff Vietnam
|
CP2216-1030-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
Push-button extension for CP2x16-1030 with landscape 15.6 inch display
- push-button extension on the bottom side
- 7 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB 2.0 socket inside the front of a push button extention, USB-A with protection cap IP65
|
Beckhoff Vietnam
|
CP2216-1031-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
- C9900-F844 Aluminum frame for Multi-touch built-in Panel PC or
Multi-touch built-in Control Panel CP2x16-00x0, landscape, with
customer specific imprint type "WSM", two colors, instead of
imprint Beckhoff
- C9900-R266 Memory PCIe module for PCs with Beckhoff PCIe module
slots, NOVRAM for fail-safe storage of process data, 512 kB,
PCI Express x1 bus
- C9900-D191 2 slots for 2½-inch hard disks or SSDs, instead of 1 slot
for a hard disk or SSD and 1 slot for CFast
- C9900-B517 2 PCIe Modulee slots integrated inside CP22xx, to
plug-in Beckhoff PCIe Modulees, instead of 2 connector brackets to
lead out interfaces
- C9900-S419 Microsoft Windows Embedded Standard 7, 32 Bit,
multilingual, English and German, more languages can be installed,
multi finger touch screen support
- TX1200-0007 License for usage of TC2 PLC License for one CPU. The
Beckhoff software license agreements are valid.
|
Beckhoff Vietnam
|
CP2216-1032-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
- C9900-F762 aluminum frame without logo imprint "Beckhoff"
- C9900-R270 Memory extension to 8 GB DDR4 RAM, instead of 4 GB,
requires a 64 bit operating system.
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
- C9900-B348 Specific BIOS for CP6202-1068-0070, CP6202-1069-0070
and CP6202-1070-0070 in customer-specific version co. Eisenmann
Intec GmbH & Co. KG, customer logo instead of Beckhoff logo
- C9900-S478 Microsoft Windows 10 IoT Enterprise, Long Term Servicing
Branch (LTSB), 64 bit, German, for industrial PCs with Intel®
Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 4th generation
|
Beckhoff Vietnam
|
CP2216-1045-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15.6 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
Push-button extension for CP2x16 with landscape 15.6 inch display
- push-button extension on the bottom side
- 8 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- All push-buttons are directly wireable with two normally-open
contacts via a terminal row.
- All signal lamps are directly wireable via
terminal row.
|
Beckhoff Vietnam
|
CP2218-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 18.5 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2218-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 18.5 inch display 1366 x 768
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2218-1003-0010
|
customized Multitouch Built-in Panel PC CP2218-1003-0010
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 18.5 inch display 1366 x 768
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2219-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch display 1280 x 1024
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2219-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch display 1280 x 1024
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2219-1022-0020
|
Multitouch Built-in Panel PC GD, SAP: 25,31006392
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch display 1280 x 1024
- multi finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port and 4 USB 3.0 ports
- 24 V DC power supply
- customised name plate and label
- C9900-F762 aluminum frame without logo imprint "Beckhoff"
- C9900-E268 1 port USB 2.0 socket inside the front, USB-A with
protection cap IP65
- C9900-C608 processor 6th generation Intel® Core™ i3-6100TE,
2.7 GHz, 2 cores (TC3:60), instead of Intel® Celeron® G3900TE
2.3 GHz (TC3:50)
- C9900-H742 solid-state disk SSD, 3D flash, 2½-inch, 120 GB,
instead of 2½-inch hard disk
- C9900-H552 16 GB CFast card, SLC flash, extended temperature range
- C9900-S419 Microsoft Windows Embedded Standard 7, 32 Bit,
multilingual, English and German, more languages can be installed,
multi finger touch screen support
- C9900-S409 Image installed on the CFast card
- C9900-U209 uninterruptible power supply UPS, integrated into the
24 V power supply, without battery
- FC9071-0000 Gigabit Ethernet PC network card 10/100/1000 MBit/s,
1 channel, PCIe interface, occupies the connecting area of the
Mini PCI card
- TX1250-0005 License for usage of TC2 NC PTP License for one CPU.
The Beckhoff software license agreements are valid.
- C9900-Z435 single packaging for every device of a delivery
|
Beckhoff Vietnam
|
CP2221-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accesible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accesible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 21,5 inch display 1920 x 1080
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2221-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 21,5 inch display 1920 x 1080
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2221-1008-0020
|
Multitouch Built-in Panel PC CP2221-1008-0010
Kampf ID-Nr.: 882107333
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 21,5 inch display 1920 x 1080
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
- C9900-S479 Microsoft Windows 10 IoT Enterprise, Long Term
Servicing Branch(LTSB), 64 bit, English, for industrial PCs
with Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 4th
generation
|
Beckhoff Vietnam
|
CP2224-0010
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 24 inch display 1920 x 1080
- multi finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-I connector
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232, 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2224-0020
|
Multitouch Built-in Panel PC
housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card, accessible from outside
- 2 connector brackets to lead out interfaces of the motherboard
at the connection section
- fan cartridge at the PC top side, accessible from outside
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 24 inch display 1920 x 1080
- multi finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- 1 serial port RS232 and 4 USB 3.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2607-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 7-inch display 800 x 480
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2607-1001
|
Multi-touch built-in Panel PC CP2607-1001 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 7-inch display 800 x 480
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
- C9900-F850 customised logo imprint on the aluminium frame
CP2607-1001
- C9900-S706 TwinCAT PLC runtime for Windows Embedded Compact 7
- TS1800-0005-0030 TwinCAT-PLC-HMI-CE 50-99 licences
Windows CE Image with integrated Visu-Runtime
|
Beckhoff Vietnam
|
CP2607-1002-0000
|
Multi-touch built-in Panel PC CP2607-1002-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 7-inch display 800 x 480
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
- customized push button extension
- push button type Rafix 22FS+
- 3 push button: red, blue, yellow
- each push button with 1NO contact
- connection via cable lead in through hole in bottom,
cable diameter max. 10mm
|
Beckhoff Vietnam
|
CP2612-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2612-1006-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
- Aluminum frame with customised imprint type "Dirmak", monochrome
|
Beckhoff Vietnam
|
CP2613-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12.1-inch display 1280 x 800
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2615-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch display 1024 x 768
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2615-1006-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch display 1024 x 768, sunlight readable
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2616-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2616-1003-0000
|
Multi-touch built-in Panel PC CP2616-1003 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
- C9900-M575 Portrait 9:16 (768 x 1366)
- Display is turned 180 degrees
|
Beckhoff Vietnam
|
CP2618-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2619-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch display 1280 x 1024
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2619-1014-0000
|
Multi-touch built-in Panel PC CP2619-1014-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch display 4:5(C9900-M575), 1024 x 768 pixel, 89 degree viewing
89 degree viewing angel from all sides
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 256 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
C9900-E268
1-port USB socket inside the front of a CP2xxx without push-button
extension, USB-A socket IP 65
|
Beckhoff Vietnam
|
CP2621-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 21.5-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2624-0000
|
Multi-touch built-in Panel PC CP26xx-0000 with ARM Cortex™-A8
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 1 slot for a microSD flash card, accessible from outside
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 24-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor ARM Cortex™-A8, 1 GHz (TC3:30)
- 3½-inch motherboard
- 1 GB DDR3 RAM
- graphic adapter integrated inside the processor
- 1 on-board Ethernet adapter 10/100BASE-T with RJ45 connector
- 1 on-board EtherCAT adapter with RJ 45 connection
- 512 MB microSD flash card
- 128 kbyte NOVRAM for fail-safe storage of TwinCAT process data
- 1 serial RS232 port and 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7
|
Beckhoff Vietnam
|
CP2712-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2712-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2712-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2712-1009-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
C9900-F762 aluminum frame without logo imprint "Beckhoff"
|
Beckhoff Vietnam
|
CP2712-1012-0010
|
Fanless Multitouch build-in Panel PC CP2712-1012-0010
Housing
- aluminium housing black anodized
- customised front panel
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch display 800 x 600
- multi-finger touch screen, flush laminated
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 4 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2713-0010
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12.1-inch display 1280 x 800
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2713-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12.1-inch display 1280 x 800
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2715-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2715-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2715-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2716-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2716-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2716-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2716-1023-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium front with glass front(laminated)
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- mounting from backside
- protection class front IP 65, rear side IP 20
- operating temperature 0…45 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen with customised front foil
- E-stop, RAFI FS22+
- 4 Buttons, illuminated
- prepared for RFID instalation
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 32 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
C9900-S476
Microsoft Windows 10 IoT Enterprise
Long Term Servicing Branch (LTSB), 64 bit, German
C9900-E159
Serial port RS232, optically linked, overload protection, D-sub 9-pin
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V powersupply
|
Beckhoff Vietnam
|
CP2716-1027-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 4 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40) At Microsoft
Windows Embedded Compact 7 only one core is supported.
Multicore support is available at Windows 7 Embedded Standard,
Windows 7 Pro, Windows 7 Ultimate and Windows 10 IoT Enterprise
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-E233 1 serial port RS232
- C9900-F074 Aluminum frame for Multi-touch built-in Panel PC or
Multi-touch built-in Control Panel CP2x16-00x0, landscape, with
customer specific imprint type "Tecnomedia", 3 colors, instead of
imprint Beckhoff
- C9900-H586 30 GB CFast card, 3D flash, extended temperature range,
instead of 4 GB CFast card
- C9900-S318 No operating system, instead of Microsoft Windows CE 6
or Windows Embedded Compact 7, less price
- C9900-S424 Microsoft Windows Embedded Standard 7, 64 Bit,
multilingual, English and German, more languages can be installed,
multi finger touch screen support
|
Beckhoff Vietnam
|
CP2716-1028-0010
|
Fanless Multitouch build-in Panel PC CP2716-1028-0010
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15,6-inch display 1366 x 768, format 16:9
- multi-finger touch screen
Features
- Prozessor Intel® Atom™ Bay Trail E3815 1,46 GHz, 1 Kern (TC3: 40)
- 3½-inch motherboard CB3263 for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 4 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- without imprint
- pull-out clamping levers for fast installation without loose parts
- earth connection on the housing
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores
(TC3: 50), instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-H586 30 GB CFast card, 3D-flash, extended temperature range,
instead of 4 GB CFast
- C9900-S318 ohne Betriebssystem
- C9900-S477 Microsoft Windows 10 IoT Enterprise, LTSB, 64 bit, English
|
Beckhoff Vietnam
|
CP2716-1028-0020
|
Fanless Multitouch Built-in Panel PC CP2716-1028-0020
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
– 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
- Without imprint
- pull-out clamping levers for fast installation without loose parts
- earth connection on the housing
- C9900-C584 processor Intel® Atom® x5-E3940, 1,6 GHz, 4 cores (TC3: 50) and
memory extension to 8 GB DDR4-RAM, instead of Intel® Atom® x5-E3930, 1,3 GHz
(TC3: 40) and 4 GB-DDR4-RAM
- C9900-S491 Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, English, for
industrial PCs with Intel® Atom™ E38xx and Intel® Atom™ x5-E39xx
- C9900-T220 Adhesive protection film for Multi Touch Control Panels and Panel
PCs with 15.6” display, plastic foil for gluing onto the touch screen, foil mounted
ex factory A mounted protection film delays the identification of water on the
touchscreen
|
Beckhoff Vietnam
|
CP2716-1404-0020
|
Fanless multitouch stainless steel build-in Panel-PC CP2716-1404-0020
Housing
stainless steel with glass front, front side IP 65, rear side IP 20
- stainless steel front , 1.4404, brushed, grain 240
- Touchscreenglass with Beckhoff Logo, printed
- Silicon sealing in blue
- 15.6 inch display 1366 x 768
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
- all connectors at the bottom of the rear side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- protection class front IP 65, rear side IP 20
- operating temperature 0…45 °C
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
– on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
– 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
- without logo
|
Beckhoff Vietnam
|
CP2718-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2718-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2718-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2718-1009-0010
|
Fanless Multitouch Built-in Panel PC, type Outotec
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
– on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
– 4 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
C9900-C573
processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50), instead
of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
At Microsoft Windows Embedded Compact 7 only one core is supported.
Multicore support is available at Windows 7 Embedded Standard,
Windows 7 Pro, Windows 7 Ultimate and Windows 10 IoT Enterprise
C9900-F763
Multi finger touch screen without logo imprint "Beckhoff"
C9900-F946
Stainless steel front for CP2918, CP2618 and CP2718
stainless steel 1.4404 matt ground with grain size 240,
instead of standard aluminium front
C9900-H586
30 GB CFast card, 3D flash, extended temperature range, instead of
4 GB CFast card
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-S318
No operating system, instead of Microsoft Windows CE 6 or
Windows Embedded Compact 7, less price
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
|
Beckhoff Vietnam
|
CP2718-1011-0010
|
Fanless Multitouch build-in Panel PC CP2718-1011-0010 typ NOV
Housing
- custoomised aluminium housing with glass front(for cutout 303x355mm)
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 4 GB CFast card, extended temperature range
- 2 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
C9900-C573
processor Intel® Atom™ E3845, 1.91 GHz, 4 cores (TC3: 50),
instead of Intel® Atom™ E3815, 1.46 GHz (TC3: 40).
C9900-R258
memory extension to 8 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system
C9900-H560
16 GB CFast card, SLC flash, extended temperature range, instead of
4 GB CFast card
C900-S318
no operating system, instead of Microsoft Windows CE 6
C9900-F762
No Beckhoff Logo printed on the aluminum frame
C9900-B545
customised Bios for CB3063 NOV, 2 USB-Ports usable
|
Beckhoff Vietnam
|
CP2719-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2719-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2719-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2719-1020-0010
|
Fanless Multitouch build-in Panel PC CP2719-1020-0010
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch display 1024 x 1280
- LCD 5:4 portrait
- multi-finger touch screen
Features
C9900-R257 memory extension to 4 GB DDR3 RAM
C9900-B415 third on-board Ethernet adapter
C9900-E234 2 USB ports of the motherboard
C9900-H586 CFast-card, 30GB, 3D-Flash
C9900-U209 uninterruptible power supply UPS
C9900-S318 without operating system
C9900-S424 Microsoft Embedded Standard 7, 64 Bit
|
Beckhoff Vietnam
|
CP2721-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 21.5-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2721-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 21.5-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2721-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 21.5-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2724-0000
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 24-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Celeron® ULV 827E 1.4 GHz, 1 Core (TC3:50)
- 3½-inch motherboard for Intel® Celeron® ULV 827E
- 2 GB DDR3 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2724-0010
|
Fanless Multitouch build-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 24-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 Core (TC3:40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 4 USB 2.0 ports
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, english, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP2724-0020
|
Fanless Multitouch Built-in Panel PC
Housing
- aluminium housing with glass front
- all connectors at the bottom of the rear side
- PC to be opened from the back side
- all components easily accessible
- 2 slots for CFast cards, accessible from outside
- 1 connector bracket to lead out interfaces of the motherboard
at the connection section
- pull-out clamping levers for fast installation without loose parts
- protection class front IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 24-inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 Cores (TC3:40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 10/100/1000BASE-T connector
- 40 GB CFast card, 3D flash, extended temperature range
- 2 USB 3.0 ports and 2 USB 2.0 ports
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP2907-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 7 inch display 800 x 480
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel
and the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2907-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 7 inch display 800 x 480
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2912-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 12 inch display 800 x 600
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel
and the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2912-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 12 inch display 800 x 600
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2912-1005-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 12 inch display 800 x 600
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel
and the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- Multi finger touch screen, layout "Dara"
- C9900-F762 aluminum frame without logo imprint
- customised push-button extension
- Emergency Stop, RAFI Rafix 22FS+
- 3 piezo push-buttons, type Baran
- all push-buttons are wired via 16 pole connector in the
removable cover
|
Beckhoff Vietnam
|
CP2913-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 12.1 inch display 1280 x 800
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel
and the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2913-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 12.1 inch display 1280 x 800
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Module
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2915-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2915-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 15 inch display 1024 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2915-1001-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
customized push button extension below the display unit
- emergency stop
- four push buttons
- symbols printed below the buttons
- M20 cable gland
customized logo printed on the touchscreen
|
Beckhoff Vietnam
|
CP2915-1005-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- C9900-F833 aluminum frame for Multi-touch built-in Control Panel
CP2215-0000 landscape, with customer specific imprint
type "Venjakob", monochrome
- C9900-E268 1 port USB socket inside the front, USB-A with protection
cap IP65
|
Beckhoff Vietnam
|
CP2915-1018-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 15 inch display 1024 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
- C9900-E268 1 port USB 2.0 socket inside the, USB-A with
protection cap IP65
|
Beckhoff Vietnam
|
CP2916-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2916-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 15.6 inch display 1366 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2916-1005-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- C9900-F762 without logo imprint on the aluminum frame
|
Beckhoff Vietnam
|
CP2916-1005-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 15.6 inch display 1366 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 7 cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
- C9900-F762 without logo imprint on the aluminum frame
|
Beckhoff Vietnam
|
CP2916-1006-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- C9900-M575 Portrait 9:16 (768 x 1366)
- Display is turned 180 degrees
|
Beckhoff Vietnam
|
CP2916-1401-0010
|
Multitouch stainless steel build-in Control Panel CP2916-1401-0010
stainless steel with glass front, front side IP 65, rear side IP 20
- stainless steel, 1.4404, brushed, grain 240
- Silicon sealing
- 15.6 inch display 1366 x 768
Multi finger touch screen without imprint
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated CP-Link4 technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
- connection via an RJ45 connector for CP-Link 4 in the backplane
- additional pin contact strip, for optional 24 V power supply
- 2 port USB 2.0 socket inside the Control Panel backplane,
all connectors at the rear side
operating temperature 0 ... 50 °C
|
Beckhoff Vietnam
|
CP2918-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2918-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 18.5 inch display 1366 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2918-1006-0011
|
CP2918-1006-0011
- 18.5 inch display 1920 x 1080
- Multi-touch PCT V03/V04 backprinted black
aluminium housing with glass front, front side IP 65, rear side IP 20
- Multi finger touch screen driver for Windows 7
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with separate 24 V DC
power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
Connection via M12 connector IP 65 for CP-Link 4
2-port USB 2.0 interface behind protection cap (X6, X7)
1-port USB 2.0 interface behind protection cap (X8)
operating temperature 0…55 °C
Terminal block on the rear side with:
- M12 connector, Emergency Stop (X1)
- M12 connector, 24 V power supply (X3)
- M6 grounding bolt (X4)
- M12 connector, CP-Link 4 (X5)
- M12 connector, Profinet In (X9)
- M12 connector, Profinet In (X10)
All connectors are marked with X1 - X10
Push-button extension on the right side with 21,5 inch Control Panel
Rafi (3.99.300.364/0000)
Pull-out clamping levers for installation without loose parts
|
Beckhoff Vietnam
|
CP2918-1007-0010
|
Multitouch build-in Control Panel with CP-Link4 interface
CP2918-1007-0000
- 18.5 inch display 1920 x 1080
Black anodized aluminium housing with glass front,
front side IP 65, rear side IP 20
Multi finger touch screen (black frame)
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated CP-Link4 technology:
- CP-Link4 allow up to 100 m distance between the Panel and
the PC
- CP-Link4 transmit USB 2.0 with 100 MBit/s and DVI
2 port USB 2.0 socket inside the Control Panel backplane
Additional 24 V power supply
all connectors at the rear side
operating temperature 0 ... 50 °C
customised push button extension
- Emergency stop RAFI FS22+
- 2 push button RAFI FS22+
- 2 encoder, CESI EBE
|
Beckhoff Vietnam
|
CP2918-1008-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 18.5 inch display 1366 x 768
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 7 cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
- C9900-F018 Aluminum frame for Multi-touch built-in Panel PC or
Multi-touch built-in Control Panel CP2x18-00x0, landscape, with
customer specific imprint type "Outotec", monochrome, instead of
imprint Beckhoff
|
Beckhoff Vietnam
|
CP2918-1030-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
Push-button extension for CP2x18 with landscape 18.5 inch display
- push-button extension on the bottom side
- 9 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65,
accessible from outside
|
Beckhoff Vietnam
|
CP2918-1123-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, with customer specific imprint
type "Outotec", front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2918-1403-0010
|
Multitouch built-in Control Panel with CP-Link 4 CP2918-1403-0010
- 18.5 inch display 1366 x 768
Stainless steel housing 1.4404, surface according B&S specification
with glass front, front side IP 65, rear side IP 20
customised front-foil laminated on multi-finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 7 cable with separate 24 V DV power
supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
- C9900-T327 18.5 inch display with Full HD resolution 1920 x 1080,
instead of Standard resolution 1366 x 768
- 1 x 2 port USB socket in the backplane, USB-A with rubber cap IP65
16pole connector Phoenix in the backplane, wiring of the PCB
|
Beckhoff Vietnam
|
CP2918-1405-0010
|
Multitouch built-in Control Panel with CP-Link 4 CP2918-1405-0010
- 18.5 inch display 1366 x 768
Stainless steel housing 1.4404,
with glass front, front side IP 65, rear side IP 20
front-foil without Beckhoff logo
laminated on multi-finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 7 cable with separate 24 V DV power
supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
- 1 x 2 port USB socket in the backplane, USB-A with rubber cap IP65
- 16pole connector Phoenix in the backplane, wiring of the PCB
- Customised push-button area underneath the display:
- Emergency Stop (Rafi Rafix 22 FS+)
- threefold PCB with ring illumination
- both wired to 16 pole connector
|
Beckhoff Vietnam
|
CP2919-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2919-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 19 inch display 1280 x 1024
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2919-1002-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
CP2919-1002-0000
- 19 inch display 1280 x 1024
Glass front with aluminium frame, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- customised push-button extension
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 1 gray-code switch with 23 positions
- 1 port USB socket inside the Control Panel front, USB A socket wit
screw-on cap IP 65
- assembly push-button extension via 2 Harting push-pull EtherCAT
sockets and 1 connector 3pole Wago
|
Beckhoff Vietnam
|
CP2919-1004-0000
|
CP2919-1004-0000 Prima Power
|
Beckhoff Vietnam
|
CP2919-1015-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- C9900-F954 Touch screen with customised imprint
type "High-Q-Cast"
- Customised push-button extension
- push-button extension on the bottom side
- 2 signal lamps, type RAFI RAFIX 22FS+, round, 30 mm
- 7 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a
second normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
|
Beckhoff Vietnam
|
CP2919-1030-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
Push-button extension for CP2x19 with landscape 19 inch display
- push-button extension on the bottom side
- 8 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65, accessible from
outside
|
Beckhoff Vietnam
|
CP2921-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2921-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 21.5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2921-1002-0010 Atotech
|
Multitouch built-in Control Panel with CP-Link 4
- 21.5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter module
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2921-1003-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- C9900-F970 Touch screen with customised imprint type "FeiCut",
bi-color
- Customised push-button extension
- push-button extension on the bottom side
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only
|
Beckhoff Vietnam
|
CP2921-1004-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
For Mounting in a push-button module C9900-M269
|
Beckhoff Vietnam
|
CP2921-1006-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- Customised push-button extension
|
Beckhoff Vietnam
|
CP2921-1007-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 21.5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter module
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
C9900-E268 1-port USB socket inside the front, USB-A socket IP 65
C9900-Z468 Adapter cable Display Port to DVI, 40 cm, is enclosed with
the delivery
|
Beckhoff Vietnam
|
CP2921-1009-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket, limited to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connections angled on the rear side, behind a hinged hood
operating temperature 0 ... 50 °C
- vertical orientation of the display inside the Control Panel
- logo imprint on the Multi finger touch screen
- Customised push-button extension
- without assembly
- imprint on the aluminum housing
- bracket with a fixed 120° angle for installation of the push-button
extension to the Control Panel
- mounting arm holder short for tube 48,3 mm, rotatable,
limited to +/- 90°, can be screwed from outside, mounted on the
hinged hood
- 2x 1 port USB socket in the side of the swing hood, USB-A with
screw-on cap IP65, with 50 cm cable and USB-A-plug
- hinged hood mounted on the rear side of the Control Panel with
cut-out for C6515 (PC must be ordered separately)
- power supply connector, 5-pin connector with strain relief
- connecting kit 1 m, containing: 1 m DVI cable, 1 m USB cable
|
Beckhoff Vietnam
|
CP2921-1010-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
Push-button extension for CP2x21 with landscape 21.5 inch display
- push-button extension on the bottom side
- 11 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 blind plug, type RAFI
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65,
accessible from outside
|
Beckhoff Vietnam
|
CP2921-1011-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- vertical orientation of the display inside the Control Panel
- customised push-button extension
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 3 blind plugs, type RAFI
- status of all push-buttons readable by one contact via USB
- additionally all push-buttons are directly wireable with a
second normally-open contact via a terminal row.
- all signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65
|
Beckhoff Vietnam
|
CP2921-1030-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
Push-button extension for CP2x21 with landscape 21.5 inch display
- push-button extension on the bottom side
- 11 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65,
accessible from outside
|
Beckhoff Vietnam
|
CP2921-1030-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 21.5 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 7 cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
Push-button extension for CP2x21 with landscape 21.5 inch display
- push-button extension on the bottom side
- 11 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65,
accessible from outside
|
Beckhoff Vietnam
|
CP2924-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
|
Beckhoff Vietnam
|
CP2924-0010
|
Multitouch built-in Control Panel with CP-Link 4
- 24 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100 m from the PC via a CAT 6A cable with integrated or separate
24 V DV power supply depending on the transmitter Modulee
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI
connection via RJ 45 connector for CP-Link 4 in the backplane
additional pin contact strip, for optional 24 V power supply
2-port USB 2.0 interface in the Control Panel backplane
all connectors at the lower rear side
operating temperature 0…50 °C
|
Beckhoff Vietnam
|
CP2924-1002-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- housing black anodized
- C9900-F762 aluminium frame without imprint
|
Beckhoff Vietnam
|
CP2924-1030-0000
|
Multitouch Built-in Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
Push-button extension for CP2x24 with landscape 24 inch display
- push-button extension on the bottom side
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- 1 port USB socket, USB-A with screw-on cap IP65,
accessible from outside
|
Beckhoff Vietnam
|
CP2924-1045-0000
|
Multitouch build-in Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, front side IP 65, rear side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
USB 3.0 input allows the direct connection to the standard USB output
of a PC at a distance up to 5 m
2 port USB 3.0 socket inside the Control Panel backplane, limited
to USB 2.0 if USB-E 2.0 is used
24 V power supply
all connectors at the rear side
operating temperature 0 ... 55 °C
- Customised push-button extension
- 13 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- the green push-button and the transparent push-buttons are
directly wireable via 2 NOs and 1 LED
- the red push-button is directly wireable via 2 NCs and 1 LED
|
Beckhoff Vietnam
|
CP3212-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3212-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch display 800 x 600
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3215-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3215-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3216-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3216-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3216-1054-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-F906 Touch screen with customised imprint type "Invescontrol"
- C9900-M184 mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from bottom instead of from top
- C9900-C607 processor 6th generation Intel® Pentium® G4400TE,
2.4 GHz,2 cores (TC3:50), instead of Intel® Celeron® G3900TE
2.3 GHz(TC3:50)
- C9900-H750 solid-state disk SSD, 3D MLC Flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- C9900-E190 USB-A in the wiring area for one USB 2.0 Port,
including covering cap IP 65
- C9900-E279 1 port USB 3.0 connector with IP 65 screw cap in the
sidewall of the CP32xx-0010 or CP37xx-0010 pc housing
- C9900-E282 2 IP 65 connectors in the wiring area of a CP32xx, led
out with PCIe Modul FC9062. 2 gigabit Ethernet interfaces.
Harting push-pull Ethernet sockets. Requires a PCIe module slot
C9900-B519.
- C9900-B519 1 PCIe Modulee slot integrated inside the Panel PC, to
plug-in Beckhoff PCIe Modules
- C9900-S479 Microsoft Windows 10 IoT Enterprise, Long Term
Servicing Branch (LTSB), 64 bit, English, for industrial PCs with
Intel® Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 4th
generation
|
Beckhoff Vietnam
|
CP3218-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3218-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3218-1600-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- Up to 2 1-port USB 3.0 connector with IP 65 screw cap in the sidewall
of the CP32xx-16xx
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of the CP32xx-16xx
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3219-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3219-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3219-1041-0010
|
Multitouch Panel PC, co Nobilia
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
Holder for toolboard mounted under Panel PC
C9900-C564
processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz, 4 cores
(TC3:80), instead of Intel® Celeron® 2000E 2.2 GHz (TC3:50)
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-M184
mounting arm adapter for Panel PC CP32xx or CP37xx, for Rittal and
Rolec mounting arm systems with 48 mm tube from bottom instead of
from top
C9900-E185
IP 65 connector in the wiring area of a CP32xx, CP37xx or CP72xx for
the second on board Ethernet adapter, Harting push-pull Ethernet
socket
C9900-E186
IP 65 connector M12 in the wiring area of a CP32xx, CP37xx or CP72xx
for one Serial interface RS232
C9900-E190
USB-A in the wiring area of a CP32xx or CP72xx for one USB 2.0 Port,
including covering cap IP 65
C9900-H750
solid-state disk SSD, 3D flash, 2½-inch, 240 GB,
instead of 2½-inch hard disk
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
|
Beckhoff Vietnam
|
CP3219-1084-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-B519 1 PCIe module slot integrated inside CP32xx or CP37xx,
to plug-in Beckhoff PCIe modules
- C9900-E282 2 IP 65 connectors in the wiring area of a CP32xx, led out with
PCIe Modul FC9062. 2 gigabit Ethernet interfaces. Harting push-pull
Ethernet sockets. Requires a PCIe module slot C9900-B519
- C9900-E279 1 port USB 3.0 connector with IP 65 screw cap in the sidewall
of the CP32xx-0010 or CP37xx-0010 pc housing
- 2x C9900-E304 USB-A in the wiring area of a CP32xx, CP37xx or CP72xx for
one USB 3.0 Port, including covering cap IP 65
- C9900-E185 IP 65 connector in the wiring area of a CP32xx or CP72xx for
the second on board Ethernet adapter, Harting push-pull Ethernet socket
- C9900-U209 uninterruptible power supply UPS, integrated into the 24 V
power supply, without battery, occupies one internal serial interface
- C9900-S493 Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit,
English, for industrial PCs with Intel® Celeron®, Pentium®, Core™ i3 or
Core™ i5 from the 6th generation onward
- C9900-F763 Multi finger touch screen without logo imprint "Beckhoff"
- C9900-FA24 Touch screen for Multitouch Control Panel CP2x19/CP3x19,
Landscape with customised imprint type "Köhl"
- C9900-R270 memory extension to 8 GB DDR4L RAM, instead of 4 GB,
requires a 64 bit operating system
- C9900-H746 solid-state disk SSD, 3D flash, 2½-inch, 480 GB, instead of 2½-
inch hard disk
|
Beckhoff Vietnam
|
CP3221-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3221-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3221-1029-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
Systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core¿ i3,
Core¿ i5, Core¿ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet-built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-E185 IP 65 connector in the wiring area for
the second on board Ethernet adapter,
Harting push-pull Ethernet socket
- C9900-E187 IP 65 connector M12 in the wiring for one USB 2.0 Port
- C9900-D190 2 slots for CFast cards, instead of 1 slot for a 2½-inch
Hard disk or SSD and 1 slot for CFast
- C9900-H555 16 GB CFast card, SLC flash,
extended temperature range, instead of 2½-inch hard disk
- C9900-H551 8 GB CFast card, SLC flash,
extended temperature range
- C9900-U209 uninterruptible power supply UPS,
integrated into the 24 V power supply, without battery,
occupies one internal serial interface
- C9900-E281 1 port USB 2.0 connector with screw cap in the,
front view, right sidewall of the pc housing
- C9900-E190 USB-A in the wiring areafor one
USB 2.0 Port, including covering cap IP 65
- C9900-A219 PC without RAID configuration,
instead of RAID1.
Each storage medium inside the PC is a separate drive
- C9900-S419 Microsoft Windows Embedded Standard 7, 32 Bit,
multilingual, English and German, more languages can be installed,
multifinger touch screen Support
- C9900-Z416 Label for CP32xx with dimensions of CP37xx
- TC1000-0050 License for usage of TC3 ADS
License for one CPU.
The Beckhoff software license agreements are valid.
|
Beckhoff Vietnam
|
CP3221-1086-0020
|
Multitouch Panel PC CP3221-1086-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit operating
system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-D connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-F070 touch-screen (Haverhill grey) with customer specific
imprint type "Mecano", one-color, instead of imprint Beckhoff
on touch-screen
- C9900-C620 processor 7th Generation Intel® Core™ i7-7700T,
2.9 GHz, 4 cores (TC3: 80), requires Windows 10 64 Bit,
instead of Intel® Celeron® G3900TE 2.3 GHz (TC3: 50)
- C9900-R270 Memory extension to 8 GB DDR4 RAM, instead of 4 GB
- C9900-D191 2 slots for 2½-inch hard disks or SSDs, instead of
1 slot for a hard disk or SSD and 1 slot for CFast
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB
instead of 2½-inch hard disk
- C9900-E185 IP 65 connector in the wiring area for the second
on board Ethernet adapter, Harting push-pull Ethernet socket
- C9900-E279 1 port USB 3.0 connector with IP 65 screw cap in the
sidewall of the pc housing
- C9900-M184 mounting arm adapter for Rittal and Rolec mounting
arm systems with 48 mm tube from bottom instead of from top
- C9900-M406 Toolboard for keyboard or tools, mounted under the
Panel PC, with integrated USB socket IP 65 at the back side
- C9900-S481 Microsoft Windows 10 IoT Enterprise, Long Term
Servicing Branch (LTSB), 64 bit, English
- C9900-B570 Specific BIOS for CP3221-1068-0020 with motherboard
CB3064 in customer-specific version Co. Raute
- customer-specific boot logo
The development of the BIOS is fixed and will not be updated
automatically
|
Beckhoff Vietnam
|
CP3224-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 24 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3: 50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3,
Core™ i5, Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3224-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 24 inch display 1920 x 1080
- multi-finger touch screen
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3: 50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- Graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3712-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3712-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch display 800 x 600
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3712-1011-0010
|
Multitouch Panel PC CP3712-1011-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock,
changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat
distribution to all the walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C Front panel
- 12 inch display 800 x 600
- multi-finger touch screen Features
- processor Intel® Atom¿ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom¿
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 2 GB CFast card, extended temperature range
- M23 built-in socket for power supply and
1 Harting push-pull Ethernet built-in socket
100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English,
supports dual finger touchscreen operation
- C9900-H560 16 GB CFast card, SLC flash,
extended temperature range, instead of 4 GB CFast card
- C9900-U209 uninterruptible power supply UPS,
integrated into the 24 V power supply, without battery,
occupies one internal serial interface
- C9900-E281 1 port USB 2.0 connector with screw cap in the,
front view, right sidewall of the pc housing
- C9900-S318 No operating system,
instead of Microsoft Windows CE 6 or Windows Embedded Compact 7,
less price
- C9900-S419 Microsoft Windows Embedded Standard 7, 32 Bit, multi-
lingual, English and German, more languages can be installed,
multi finger touch screen Support
- TC1000-0040 License for usage of TC3 ADS
License for one CPU. The Beckhoff software license
agreements are valid
|
Beckhoff Vietnam
|
CP3713-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12.1 inch display 1280 x 800
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
– 3½-inch motherboard for Inbtel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T
|
Beckhoff Vietnam
|
CP3713-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12.1 inch display 1280 x 800
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3715-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3715-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3715-1022-0010
|
Front panel
- 12 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 4 GB CFast card, extended temperature range
- M12 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40) At Microsoft
Windows Embedded Compact 7 only one core is supported. Multicore
support is available at Windows 7 Embedded Standard, Windows 7 Pro,
Windows 7 Ultimate and Windows 10 IoT Enterprise
- C9900-R258 memory extension to 8 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system
- C9900-H590 60 GB CFast card, 3D flash, extended temperature range,
instead of 4 GB CFast card
- C9900-E185 IP 65 connector in the wiring area of a CP32xx, CP37xx or
CP72xx for the second on board Ethernet adapter, Harting push-pull
Ethernet socket
- C9900-E186 IP 65 connector M12 in the wiring area of a CP32xx,
CP37xx or CP72xx for one Serial interface RS232
- C9900-E279 1 port USB 3.0 connector with IP 65 screw cap in the pc
housing sidewall of the CP32xx or CP37xx from version -0010
- C9900-S477 Microsoft Windows 10 IoT Enterprise, 64 Bit, englisch
|
Beckhoff Vietnam
|
CP3715-1047-0010
|
Multitouch Panel PC CP3715-1047-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring
area
- 2 GB CFast card, extended temperature range
- 24 V DC power supply
- C9900-F0xx touchscreen landscape, with customised imprint "B+B",
2 colors
- C9900-C572 processor Intel® Atom™ E3845, 1.75GHz, 2 cores (TC3: 40),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
- memory extension to 4 GB DDR3L RAM, instead of 2 GB
- C9900-H586 40 GB CFast card, 3D flash, extended temperature range,
instead of 20 GB CFast
- C9900-E285 1 port USB 2.0 connector with screw cap in the sidewall
of the pc housing
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- 19pole-connector in the wiring area for push-button extension
- 4pole-connector in the wiring area for power supply
- C9900-S318 No operating system
- Customised push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+
- 1 keyswitch
type RAFI RAFIX 22FS+, round, 30 mm
- 5 push-button claer with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
|
Beckhoff Vietnam
|
CP3715-1048-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- 1 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- 3 x M5 mounting holes on the bottom side of the Panel PC for
mounting a keyboard shelf C9900-M419 or a handle C9900-M361
|
Beckhoff Vietnam
|
CP3715-1049-0010
|
Multitouch Panel PC CP3715-1049-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 70 x 70 mm on the rear side
- 2 slots for CFast cards
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom- E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom®
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D
port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring
area
- 4 GB CFast card, extended temperature range
- 24 V DC power supply, switchable, connector in the backplane
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores
(TC3: 50), instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
At Microsoft Windows Embedded Compact 7 only one core is
supported. Multicore support is available at Windows 7 Embedded
Standard, Windows 7 Pro, Windows 7 Ultimate and Windows 10 IoT
Enterprise
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-H583 40 GB CFast card, 3D flash, extended temperature range
- C9900-E185 IP 65 connector in the wiring area of a CP32xx, CP37xx
or CP72xx for the second on board Ethernet adapter, Harting
push-pull Ethernet socket
- 3x C9900-E285 1 port USB 2.0 connector with screw cap in the
sidewall of the pc housing of the CP3716-1010
- C9900-S318 No operating system, instead of Microsoft Windows CE 6
or Windows Embedded Compact 7, less price
- C9900-S477 Microsoft Windows 10 IoT Enterprise, Long Term
Servicing Branch(LTSB), 64 bit, English, for industrial PCs with
Intel® Atom™ E38xx
- 2x C9900-K281 network cable, length 3 m, assembled, Harting
push-pull Ethernet connector IP 65, second end RJ45 IP 20
|
Beckhoff Vietnam
|
CP3715-1050-0010
|
Multitouch Panel PC CP3715-1050-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch display 1024 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 4 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring
area
- 12pole-connector in the wiring area for power supply
- 8pole-connector in the wiring area for emergency stop
- 24 V DC power supply
- Operatings system: Microsoft Windows Embedded Compact 7, english
Included Options:
- C9900-C572 processor Intel® Atom™ E3845, 1.75GHz, 2 cores (TC3: 40),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
- C9900-E285 1 port USB 2.0 connector with screw cap in the sidewall
of the pc housing
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
Customised push-button extension
- 1 emergency stop key, 2xNC,1xNO type Rafi RAFIX 22FS+
|
Beckhoff Vietnam
|
CP3715-1600-0020
|
Multitouch Panel PC CP3715-1600-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch display 1024 x 768
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3716-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3716-0010
|
Multitouch-Panel-PC CP3716-1046-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 20 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring area
- 1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the PC housing
- M23-19pole-connector in the wiring area for power supply and for wiring the push-button extension
- 24 V DC power supply
- operating system: Windows embedded compact 7
Push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+, round, 30 mm
- 3 push-button keys, green, red, blue, with signal lamp, type RAFI RAFIX 22FS+, round, 30 mm
- Labels for push-button caps for individual marking of each push-button can be ordered as an option.
- The emergency stop key is wired with two normally-closed contacts and push-button with one normally-open
contact each to a 19-pin round connector.
- Additionally, all push-buttons are transmitted with one normally-open contact via USB.
- The LEDs of the push-buttons are controlled via USB.
|
Beckhoff Vietnam
|
CP3716-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3716-1011-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- 1 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- 3 x M5 mounting holes on the bottom side of the Panel PC for
mounting a keyboard shelf C9900-M419 or a handle C9900-M361
|
Beckhoff Vietnam
|
CP3716-1023-0010
|
Multitouch-Panel-PC CP3716-1023-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 20 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring area
- 1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the PC housing
- M23-19pole-connector in the wiring area for power supply and for wiring the push-button extension
- 24 V DC power supply
- operating system: Windows embedded compact 7
Push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+, round, 30 mm
- 3 push-button keys, green, red, blue, with signal lamp, type RAFI RAFIX 22FS+, round, 30 mm
- Labels for push-button caps for individual marking of each push-button can be ordered as an option.
- The emergency stop key is wired with two normally-closed contacts to a 19-pin round connector.
- The red push button is wired with one normally-closed contact to a 19-pin round connector.
- The green and the blue push button are each wired with one normally-closed contact to a 19-pin round connector.
- The LEDs of the push-buttons are wired to the 19-pin round connector.
|
Beckhoff Vietnam
|
CP3716-1057-0010
|
Multitouch Panel PC CP3716-1057-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring
area
- 4 GB CFast card, extended temperature range
- 24 V DC power supply
- without imprint
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-H586 32 GB CFast card, 3D-flash, extended temperature range,
instead of 4 GB CFast
- C9900-E285 1 port USB 2.0 connector with screw cap in the sidewall
of the pc housing
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- 4pole-connector in the wiring area for power supply
- C9900-S318 No operating system
- C9900-S477 Microsoft Windows 10 IoT Enterprise, LTSB,
64 Bit, english
|
Beckhoff Vietnam
|
CP3716-1057-0020
|
Multitouch Panel PC CP3716-1057-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 24 V DC power supply
- Without imprint
- C9900-C584 processor Intel® Atom® x5-E3940, 1,6 GHz, 4 cores (TC3: 50) and
memory extension to 8 GB DDR4-RAM, instead of Intel® Atom® x5-E3930, 1,3
GHz (TC3: 40) and 4 GB-DDR4-RAM
- C9900-S491 Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, English, for
industrial PCs with Intel® Atom™ E38xx and Intel® Atom™ x5-E39xx
- C9900-T220 Adhesive protection film for Multi Touch Control Panels and Panel
PCs with 15.6” display, plastic foil for gluing onto the touch screen, foil mounted
ex factory A mounted protection film delays the identification of water on the
touchscreen
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- 4pole-connector in the wiring area for power supply
- C9900-E279 1 port USB 3.0 connector with IP 65 screw cap in the sidewall of the
CP32xx-0010 or CP37xx-0010 pc housing
|
Beckhoff Vietnam
|
CP3716-1058-0010
|
Multitouch Panel PC CP3716-1058-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring
area
- 4 GB CFast card, extended temperature range
- 24 V DC power supply
- without imprint
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-H586 32 GB CFast card, 3D-flash, extended temperature range,
instead of 4 GB CFast
- C9900-E285 1 port USB 2.0 connector with screw cap in the sidewall
of the pc housing
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- 19pole-connector in the wiring area for power supply and push-button
In the push-button extension
- C9900-S318 No operating system
- C9900-S477 Microsoft Windows 10 IoT Enterprise, LTSB,
64 Bit, english
- Customised push-button extension
- 1 illuminated emergency stop key, type Rafi RAFIX 22FS+
- 1 push-button green and 1 push-button blue with signal lamp,
type RAFI RAFIX 22FS+, round, 30 mm
2 NO-contacts and LED wireable directly via terminal row
- 1 push-button red with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
2 NC-contacts and LED wireable directly via terminal row
|
Beckhoff Vietnam
|
CP3716-1058-0020
|
Multitouch Panel PC CP3716-1058-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
– 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in
|
Beckhoff Vietnam
|
CP3716-1061-0010
|
Multitouch Panel PC CP3716-1028-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...50 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
- "Geyssel" imprint on touchscreen
Features
- processor Intel® Atom™ E3827 1.75 GHz, 2 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring
area
- 16 GB CFast card, extended temperature range
- 24 V DC power supply
- 19pin-connector in the wiring area for power supply and e-stop
- operating system: Windows embbedded standard 7
- C9900-E185
IP 65 connector in the wiring area of a CP32xx, CP37xx or CP72xx
for the second on-board Ethernet adapter,Harting push-pull Ethernets
- C9900-E281
1-port USB 2.0 connector with IP 65 screw cap in the sidewall
of the CP32xx-0000 or CP37xx-0010 PC housing
Customised push-button extension
- Emergnecy stop type RAFI RAFIX FS22+
2 x NC connected on 19pin connector
1 x NO connected on 19pin connector
|
Beckhoff Vietnam
|
CP3716-1065-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15.6 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 4 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- C9900-F906 touch-screen for Multi-touch built-in Panel PC or Multi-
touch built-in Control Panel CP2x16-00x0, landscape, with customer
specific imprint type "Invescontrol", 2 colors, WITH imprint Beckhof
on aluminum frame (option C9900-F762 can be ordered separately)
touch-screen Multi-touch Panel PC or Multi-touch Control Panel
CP3x16-00x0, landscape, with customer specific imprint type
"Invescontrol", 2 colors, instead of imprint Beckhoff on touch-scree
- C9900-M184 mounting arm adapter for Panel PC CP32xx or CP37xx, for
Rittal and Rolec mounting arm systems with 48 mm tube from bottom
instead of from top
- C9900-C573 processor Intel® Atom™ E3845, 1.91GHz, 4 cores (TC3: 50),
instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40) At Microsoft
Windows Embedded Compact 7 only one core is supported. Multicore
support is availble at Windows 7 Embedded Standard, Windows 7 Pro,
Windows 7 Ultimate and Windows 10 IoT Enterprise
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-H586 30 GB CFast card, 3D flash, extended temperature range,
instead of 4 GB CFast card
- C9900-E185 IP 65 connector in the wiring area of a CP32xx, CP37xx or
CP72xx for the second on board Ethernet adapter, Harting push-pull
Ethernet socket
- C9900-E190 USB-A in the wiring area of a CP32xx, CP37xx or CP72xx
for one USB 2.0 Port, including covering cap IP 65
- C9900-E279 1 port USB 3.0 connector with IP 65 screw cap in the pc
housing sidewall of the CP32xx or CP37xx from version -0010
- C9900-S471 Microsoft Windows 10 IoT Enterprise, Long Term Servicing
Branch (LTSB), 32 bit, English, for industrial PCs with Intel® Atom™
E38xx
- C9900-S318 No operating system, instead of Microsoft Windows CE 6
or Windows Embedded Compact 7, less price
|
Beckhoff Vietnam
|
CP3716-1600-0020
|
Multitouch Panel PC CP3716-1600-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15.6-inch display 1366 x 768
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3718-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3718-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3718-1034-0010
|
Multitouch-Panel-PC CP3718-1034-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 20 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring area
- 1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the PC housing
- M23-19pole-connector in the wiring area for power supply and for wiring the push-button extension
- 24 V DC power supply
- operating system: Windows embedded compact 7
Push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+, round, 30 mm
- 3 push-button keys, green, red, blue, with signal lamp, type RAFI RAFIX 22FS+, round, 30 mm
- Labels for push-button caps for individual marking of each push-button can be ordered as an option.
- The emergency stop key is wired with two normally-closed contacts to a 19-pin round connector.
- The red push button is wired with one normally-closed contact to a 19-pin round connector.
- The green and the blue push button are each wired with one normally-closed contact to a 19-pin round connector.
- The LEDs of the push-buttons are wired to the 19-pin round connector.
|
Beckhoff Vietnam
|
CP3718-1036-0010
|
Multitouch-Panel-PC CP3718-1036-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 20 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring area
- 1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the PC housing
- M23-19pole-connector in the wiring area for power supply and for wiring the push-button extension
- 24 V DC power supply
- operating system: Windows embedded compact 7
Push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+, round, 30 mm
- 3 push-button keys, green, red, blue, with signal lamp, type RAFI RAFIX 22FS+, round, 30 mm
- Labels for push-button caps for individual marking of each push-button can be ordered as an option.
- The emergency stop key is wired with two normally-closed contacts and push-button with one normally-open
contact each to a 19-pin round connector.
- Additionally, all push-buttons are transmitted with one normally-open contact via USB.
- The LEDs of the push-buttons are controlled via USB.
|
Beckhoff Vietnam
|
CP3718-1037-0010
|
Multitouch Panel PC CP3718-1037-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 4 GB CFast card, extended temperature range
- M12 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- C9900-C573
processor Intel® Atom® E3845, 1.91 GHz, 4 Core (TC3: 50), instead of
Intel® Atom® E3815, 1.46 GHz (TC3: 40)
- C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB
- C9900-E285
1 port-USB, integreated in the sidewall of the CP
- C9900-E185
second LAN port, Harting-Push-Pull
- C9900-H741
30GB CFast-card, 3D flash, extended temperature range, instead of
4-GB-CFast-card
- C9900-S419
Microsoft Windows embedded standard 7, 32bit
|
Beckhoff Vietnam
|
CP3718-1040-0010
|
Multitouch Panel PC CP3718-1040-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- RFID under the displayunit type multi(Mifare + Legic) via USB
|
Beckhoff Vietnam
|
CP3718-1040-0020
|
Multitouch Panel PC CP3718-1040-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
- RFID under the displayunit type multi(Mifare + Legic) via USB
|
Beckhoff Vietnam
|
CP3718-1041-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 18.5 inch display 1366 x 768
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- 1 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- 3 x M5 mounting holes on the bottom side of the Panel PC for
mounting a keyboard shelf C9900-M419 or a handle C9900-M361
|
Beckhoff Vietnam
|
CP3718-1044-0010
|
Multitouch Panel PC CP3718-1044-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- customised housing
- 18.5 inch display 1366 x 768
- multi-finger touch screen with customised imprint
Features
- processor Intel® Atom™ E3845 1.91 GHz, 5 core (TC3: 50)
- 3½-inch motherboard for Intel® Atom™ CB3263
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 30 GB CFast card, 3D-flash, extended temperature range
- 24 V DC power supply
Connectors in the mounting arm area
- M12 built-in socket for power supply
- 2 Harting push-pull Ethernet built-in socket 100/1000BASE-T
- M23 19pin connector for the push button extension
Connectors ouside
- 2 x USB-A behind silicon cap
Operating system
- C9900-S479 Microsoft Windows 10 LTSB
Push button extension
- emergency stop
- keyswitch
- 2 buttons, green, red, labeld ex workx
- all buttons are wired on th 19 pin connector
|
Beckhoff Vietnam
|
CP3718-1600-0020
|
Multitouch Panel PC CP3718-1600-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 18.5-inch display 1366 x 768
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3719-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3719-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Inbtel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3719-1056-0010
|
Multitouch Panel PC CP3719-1056-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slot for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 4 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 2 Ethernet built-in sockets
100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- C9900-C572 processor Intel® Atom™ E3827, 1.75GHz, 2 cores (TC3: 40),
Instead of Intel® Atom™ E3815, 1.46GHz (TC3: 40)
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
- C9900-E185 second Ethernetport in the connection area
- C9900-E281 1 port USB 2.0 connector with screw cap in the
sidewall of the pc housing
- C9900-M481 customised tool board
|
Beckhoff Vietnam
|
CP3719-1063-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- 1 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- M5 mounting holes for push-button extension or others on the
bottom side of the Panel PC
|
Beckhoff Vietnam
|
CP3719-1064-0010
|
Multitouch Panel PC CP3719-1064-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch display 1280 x 1024
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 4 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 2 Ethernet built-in sockets
100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- mounting arm adapter plate with 4 M6 tapped holes 100 x 100 mm on
the backside
- passive cooling without internal fan
- M12 instead of M23 built-in socket for power supply
- C9900-E284 2 port USB 2.0 connector with screw cap inside the
connector block, accessible from outside
- 2x C9900-E285 1 port USB 2.0 connector with screw cap on the
bottom side of the pc housing
|
Beckhoff Vietnam
|
CP3719-1086-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 4 M threaded holes on the bottom of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 19-inch display 1280 x 1024
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
- dual Ethernet adapter with 2 x 100/1000BASE-T connector,
- 2 RJ45 Ethernet built-in socket 100/1000BASE-T in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- 24 V DC power supply
- M12 built-in socket for power supply
- 2 port USB 2.0 connector with screw cap inside the connector block, accessible from outside
- 2x 1 port USB 2.0 connector with screw cap in the sidewall of the pc housing
- customised tool board
|
Beckhoff Vietnam
|
CP3719-1600-0020
|
Multitouch Panel PC CP3719-1600-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 19-inch display 1280 x 1024
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3721-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3721-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3721-1073-0010
|
Multitouch-Panel-PC CP3721-1073-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21,5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 20 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring area
- 1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the PC housing
- M23-19pole-connector in the wiring area for power supply and for wiring the push-button extension
- 24 V DC power supply
- operating system: Windows embedded compact 7
Push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+, round, 30 mm
- 3 push-button keys, green, red, blue, with signal lamp, type RAFI RAFIX 22FS+, round, 30 mm
- Labels for push-button caps for individual marking of each push-button can be ordered as an option.
- The emergency stop key is wired with two normally-closed contacts to a 19-pin round connector.
- The red push button is wired with one normally-closed contact to a 19-pin round connector.
- The green and the blue push button are each wired with one normally-closed contact to a 19-pin round connector.
- The LEDs of the push-buttons are wired to the 19-pin round connector.
- 1-port USB 2.0 connector with IP 65 screw cap
|
Beckhoff Vietnam
|
CP3721-1074-0010
|
Multitouch-Panel-PC CP3721-1074-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21,5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- 20 GB CFast card, extended temperature range
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 1 Harting push-pull Ethernet socket 100/1000BASE-T in the wiring area
- 1-port USB 2.0 connector with IP 65 screw cap in the sidewall of the PC housing
- M23-19pole-connector in the wiring area for power supply and for wiring the push-button extension
- 24 V DC power supply
- operating system: Windows embedded compact 7
Push-button extension
- 1 emergency stop key, type Rafi RAFIX 22FS+, round, 30 mm
- 3 push-button keys, green, red, blue, with signal lamp, type RAFI RAFIX 22FS+, round, 30 mm
- Labels for push-button caps for individual marking of each push-button can be ordered as an option.
- The emergency stop key is wired with two normally-closed contacts and push-button with one normally-open
contact each to a 19-pin round connector.
- Additionally, all push-buttons are transmitted with one normally-open contact via USB.
- The LEDs of the push-buttons are controlled via USB.
- 1-port USB 2.0 connector with IP 65 screw cap
|
Beckhoff Vietnam
|
CP3721-1088-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- 1 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- 3 x M5 mounting holes on the bottom side of the Panel PC for
mounting a keyboard shelf C9900-M419 or a handle C9900-M361
|
Beckhoff Vietnam
|
CP3721-1092-0010
|
Multitouch Panel PC CP3721-1092-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- wiring area for up to 4 IP 65 connectors
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65/ Connection area IP20
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is LED out in the wiring area
- 4 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 2 Ethernet built-in sockets
100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- mounting arm adapter plate with 4 M6 tapped holes 100 x 100 mm on
the backside
- passive cooling without internal fan
- M23 built-in socket 12 pole for power supply
- C9900-E284 2 port USB 2.0 connector with screw cap inside the
connector block, accessible from outside
- 2x C9900-E285 1 port USB 2.0 connector with screw cap on the
bottom side of the pc housing
|
Beckhoff Vietnam
|
CP3721-1125-0010
|
Multitouch Panel PC CP3721-1125-0010
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 21.5 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply
- 1 Harting push-pull Ethernet built-in socket 100/1000BASE-T in the wiring
area
- 24 V DC power supply
- 2 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- 3 x M5 mounting holes on the bottom side of the Panel PC for
mounting a keyboard shelf C9900-M419 or a handle C9900-M361
|
Beckhoff Vietnam
|
CP3721-1600-0020
|
Multitouch Panel PC CP3721-1600-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 21.5-inch display 1920 x 1080
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3724-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 24 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815, 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 20 GB CFast card, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
|
Beckhoff Vietnam
|
CP3724-0020
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 4 IP 65 connectors
- 2 slots for CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 24 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ x5-E3930 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one of these is led out in the wiring area
- 40 GB CFast card, 3D flash, extended temperature range
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3724-1050-0010
|
Multitouch Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 x M6 mounting holes 100 x 100 mm on the rear side
- 1 slot for one CFast card
- lithium battery of the system clock, changeable from outside
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 24 inch display 1920 x 1080
- multi-finger touch screen
Features
- processor Intel® Atom™ E3815 1.46 GHz, 1 core (TC3: 40)
- 3½-inch motherboard for Intel® Atom™
- 2 GB DDR3L RAM, expandable ex factory to 8 GB
- graphic adapter integrated inside the Intel® processor,
1 DVI-D port occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- 20 GB CFast card, extended temperature range
- 12pin built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- 1 port USB 2.0 connector with screw cap in the sidewall of the pc
housing
- Microsoft Windows Embedded Compact 7, English, supports dual finger
touchscreen operation
- 3 x M5 mounting holes on the bottom side of the Panel PC for
mounting a keyboard shelf C9900-M419 or a handle C9900-M361
|
Beckhoff Vietnam
|
CP3724-1600-0020
|
Multitouch Panel PC CP3724-1600-0020
Housing
- Industrial PC with Control Panel for mounting arm installation
- 4 M6 threaded holes with a distance of 100 x 100 mm for connection
to a mounting arm system
- wiring area for up to 6 IP 65 connectors
- 1 slot for one CFast card
- CFast cards and lithium battery of the system clock, changeable
from outside
- passive cooling without fan
- 20 cm free space required around the PC for air circulation
- 3 M5 threaded holes on the underside of the Control Panel for
mounting mechanical extensions, see options
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 24-inch display 1920 x 1080
- multi-finger touch screen
Features
- Intel® Atom™ x5-E3930, 1.3 GHz, 2 cores (TC3: 40)
- 3½-inch motherboard for Intel® Atom™ x5-E39xx
- 4 GB DDR4 RAM, expandable ex factory to 8 GB
- Graphic adapter integrated inside the Intel® processor on-board
dual Ethernet adapter with 2 x 100/1000BASE-T connector, one
Ethernet port led out ex factory
- 40 GB CFast card, 3D flash, extended temperature range
- 1-port USB 3.0 connector with IP 65 screw cap in the sidewall of
the PC housing M23 built-in socket for power supply and 1
Harting push-pull Ethernet built-in socket 100/1000BASE-T in the
wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP3907-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 7 inch display 800 x 480
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 50 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3907-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 7-inch display 800 x 480
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 50 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3907-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 7-inch display 800 x 480
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 50 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3912-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 12 inch display 800 x 600
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3912-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 12-inch display 800 x 600
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3912-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 12-inch display 800 x 600
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3912-1009-0010
|
Multi-touch Control Panel CP3912-1009-0010 with CP-Link 4
- 12-inch display 800 x 600
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- C9900-M575 vertical orientation of the display
- C9900-M750 rotatable and tiltable mounting arm adapter for
Rittal and Rolec mounting arm systems with 48 mm tube from top
|
Beckhoff Vietnam
|
CP3912-1032-0010
|
Multi-touch Control Panel CP3912-1032-0010 with CP-Link 4
- 12-inch display 800 x 600
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- Customised push-button extension
- push-button extension on the bottom side
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
- 1 key switch, type RAFI RAFIX 22FS+ compact, round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of the push-
button keys
- status of the push-buttons keys readable by one contact via USB
- Additionally the push-button keys are directly wireable with a
second normally-open contact via a terminal row.
- status of the key switch readable by two normally-open contacts
via USB
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
- Touch screen with customised imprint type "Lisibach", monochrome
|
Beckhoff Vietnam
|
CP3912-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3912-1035-0000
- 12 inch display 800 x 600
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
customised push-button extension
- push-button extension on the bottom side
- 4 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminum cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel!
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3912-1035-0010
|
Multi-touch Control Panel CP3912-1035-0010 with CP-Link 4
- 12-inch display 800 x 600
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0...50 °C
customised push-button extension
- push-button extension on the bottom side
- 4 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3912-1045-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 12 inch display 800 x 600
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
Push-button extension for CP3912 with landscape 12 inch display
- push-button extension on the bottom side
- 4 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- All push-buttons are directly wireable with
two normally-open contacts via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the backside
- All signal lamps are directly wireable via
terminal row.
|
Beckhoff Vietnam
|
CP3913-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 12.1 inch display 1280 x 800
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3913-0010
|
Multitouch Control Panel CP39xx-0010 with CP-Link 4
- 12.1-inch display 1280 x 800
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3913-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 12.1 inch display 1280 x 800
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
- customised push-button extension
- push-button extension on the bottom side
- 4 holes for push-buttons for Rafi FS22+, Siemens 3SB3 or
Eaton RMQ Titan
- 1 hole for Emergency Stop
- aluminum cable channel to the mounting arm adapter on the rearside
with M20 cable gland
- mounting arm adapter
C9900-M752 or C9900-M753 must be ordered separately
Mounting arm adapter is not included in the price of the CP.
Configuration of the CP without mounting arm adapter is not possible
|
Beckhoff Vietnam
|
CP3913-1035-0010
|
Multitouch Control Panel with CP-Link 4
- 12.1-inch display 1280 x 800
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- customised push-button extension
- push-button extension on the bottom side
- 4 holes for push-buttons for Rafi FS22+, Siemens 3SB3 or
Eaton RMQ Titan
- 1 hole for Emergency Stop
- aluminum cable channel to the mounting arm adapter on the rearside
with M20 cable gland
- mounting arm adapter
C9900-M752 or C9900-M753 must be ordered separately
Mounting arm adapter is not included in the price of the CP.
Configuration of the CP without mounting arm adapter is not possible
|
Beckhoff Vietnam
|
CP3915-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3915-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 15-inch display 1024 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3915-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 15-inch display 1024 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3915-1007-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- Customised logo imprint on the Multi finger touch screen
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top, instead of connection block
- Customised push-button extension
- Push-button extension on the right side
- 2x 1 port USB socket, with screw-on cap IP65
- 1 hole, bore: 22,3 mm, for emergency stop mounting, type
Siemens (by customer)
- 4 holes, bore: 22,5 mm, for switching element mounting, type
Siemens (by customer)
- Supply via 19 pin round connector within the cable pit,
without assembly, enclosed the mating connector with contacts
- Customised imprint on the aluminum frame
|
Beckhoff Vietnam
|
CP3915-1009-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- customised imprint on multi finger touch screen
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
- customised push-button extension
- push-button extension on the bottom side
- customised imprint on housing for push-buttons
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 1 knob switch, type RAFI RAFIX 22FS+
- status of the push-buttons readable by one contact NO via USB
- status of knob switch readable by two contacts NO via USB
- additionally only push-buttons are directly wireable with a
second normally-open contact via a terminal row
- aluminum cable channel to the mounting arm adapter on the backside
with cable gland M20
- all signal lamps are transmitted via USB only
|
Beckhoff Vietnam
|
CP3915-1011-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 3 short travel push-button with 3 color LED and ring illumination,
slidein label for marking, readable by one NO contact via USB
- 1 emergency stop
readable by one NO contact via USB
2 NC contacts for directly wireable
Supply via M20 cable gland
- RFID Typ Mifare
|
Beckhoff Vietnam
|
CP3915-1011-0010
|
Multitouch-Control-Panel CP39xx-0010 with CP-Link 4
- 15-Zoll-Display 1024 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
– multifinger touch screen driver for Windows 7
– multi-fi nger touch screen driver for Windows 7
– single-fi nger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
– CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with integrated or separate 24 V DC power supply depending
on the transmitter module.
– CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply.
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 3 short travel push-button with 3 color LED and ring illumination,
slidein label for marking, readable by one NO contact via USB
- 1 emergency stop
readable by one NO contact via USB
2 NC contacts for directly wireable
Supply via M20 cable gland
- RFID Typ Mifare
|
Beckhoff Vietnam
|
CP3915-1015-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
- Beckhoff logo imprint on the Multi finger touch screen
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top, instead of connection block
- C9900-E274 1-port USB socket at the mounting arm adapter
USB-A with screw-on cap IP 65, accessible from outside
- Customised push-button extension
- Push-button extension on the bottom
- 1 emergency-stop, Rafi FS+, 2x NC
- 1 push-button, Rafi FS+, 2x NO with LED
- 1 keyswitch, Rafi FS+, 2 positions, 2x NO
- 1 Graycode switch with 23 positions
- 1 rotary encoder
- Supply via M20 cable gland in the mounting arm adapter
- Customised imprint on the aluminum frame
|
Beckhoff Vietnam
|
CP3915-1016-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
C9900-M750
rotatable and tiltable mounting arm adapter for Control Panel CP3912
to CP3924 for Rittal and Rolec mounting arm systems
with 48 mm tube from top
Handle on the bottom side of the CP, lenght 275mm
|
Beckhoff Vietnam
|
CP3915-1017-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
Without logo imprint on the Multi finger touch screen
- C9900-M753 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from bottom, instead of connection block
C9900-E274
1-port USB socket at the mounting arm adapter C9900-M75x
USB-A with screw-on cap IP 65, accessible from outside
Customised push-button extension
- Push-button extension on the bottom
- 1 emergency-stop, Rafi, 2x NC, 1 x NO
- 1 push button, Rafi, 2x NO with LED
- 1 keyswitch, Rafi, 2 positions, 2x NC
- 1 Graycode switch with 24 positions
- 1 rotary encoder
- Supply via M20 cable gland in the mounting arm adapter
- Customised imprint on the aluminum frame
|
Beckhoff Vietnam
|
CP3915-1018-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3915-1018-0000
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- Customised push-button extension
- push-button extension on the bottom side
- 4 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 3 blind plugs
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-F763 without logo imprint on the Multi finger touch screen
|
Beckhoff Vietnam
|
CP3915-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3915-1035-0000
- 15 inch display 1024 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
customised push-button extension
- push-button extension on the bottom side
- 7 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminum cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel!
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3915-1035-0010
|
Multi-touch Control Panel CP3915-1035-0010 with CP-Link 4
- 18.5-inch display 1024 x 768
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0...50 °C
customised push-button extension
- push-button extension on the bottom side
- 7 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3916-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3916-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3916-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3916-1004-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen with Mathis Logo
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
C9900-M752
rotatable and tiltable mounting arm adapter for Control Panel
with push-button extension C9900-Gxxx for Rittal and Rolec
mounting arm systems with 48 mm tube from top
push button extension with
- Emergency stop
- 3 push-button keys with signal lamp
- USB socket at the push-button extension
C9900-M423
Toolboard for keyboard or tools, mounted under a Control Panel or
Panel PC CP3xxx, with integrated 2x USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP3916-1006-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
For Enercon, SAP No.: 583845
- 15.6-inch display 1366 x 768
aluminum housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…55 °C
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm, USB-A with
screw-on cap IP65, accessible from outside
- C9900-G024 Push-button extension with landscape 15.6 inch display
- push-button extension on the bottom side
- 8 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round,30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a
second normally-open contact via a terminal row
- Aluminum cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only
|
Beckhoff Vietnam
|
CP3916-1009-0000
|
- 15.6-inch-display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
- DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50 m from the PC.
- USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
- DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop (RAFI RAFIX 22FS+), 2 x NC directly wireable and
1 x NO via USB.
- 2 keyswitches (RAFI RAFIX 22FS+),
1 x latching, special closure
1 x groping
1 x NO directly wireable and 1 x NO + LED via USB.
- 2 push-buttons (RAFI RAFIX 22FS+),
1 x white cover
1 x yellow bulging cover
1 x NO directly wireable and 1 x NO + LED via USB.
- Supply via M20 cable gland
- 3x M6 holes at the bottom side of the CP for C9900-M418
|
Beckhoff Vietnam
|
CP3916-1012-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- Customised logo imprint on the Multi finger touch screen
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top, instead of connection block
- Customised push-button extension
- Push-button extension bottom
- 1 hole, bore: 22,3 mm, for emergency stop mounting, type
Siemens (by customer)
- 4 holes, bore: 22,5 mm, for switching element mounting, type
Siemens (by customer)
- Supply via 19 pin round connector within the cable pit,
without assembly, enclosed the mating connector with contacts
- Customised imprint on the aluminum frame
- 2 x USB Port at the back side
|
Beckhoff Vietnam
|
CP3916-1014-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm, USB-A with
screw-on cap IP65, accessible from outside
- Customised push-button
- push-button extension on the bottom side
- 7 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 key switch, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a
second normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on
the backside
- All signal lamps are transmitted via USB only.
- C9900-Z255 Push-button cap blue for push-button extension
allows individual assembly
- type Rafi FS+, bore: 22,3 mm
- 5 pieces
- C9900-Z256 Push-button cap yellow for push-button extension
allows individual assembly
- type Rafi FS+, bore: 22,3 mm
- 5 pieces
|
Beckhoff Vietnam
|
CP3916-1021-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- Customised push-button extension
- push-button extension on the bottom side
- 7 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 1 key switch, type RAFI RAFIX 22FS+ Kompakt
- 1 Emergency Stop, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only
|
Beckhoff Vietnam
|
CP3916-1022-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
- Customised push-button extension
- 4 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round
- 1 key switch, type RAFI RAFIX 22FS+ Kompakt
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 3 blind plugs, type RAFI RAFIX 22FS
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only
- 12 pole connector in the mounting arm adapter for Euchner
enabling switch ZSB077040 (not included in the delivery)
- Supply of the push-button extension via 19 pin round connector
within the mounting arm adapter, including assembly.
Enclosed the mating connector with contacts
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- C9900-M481 Toolboard for keyboard, mounted under the Control Panel,
with integrated 2port-USB socket IP 65 at the back side and rear
cable channel wide for keyboard cables
|
Beckhoff Vietnam
|
CP3916-1031-0000
|
- Multitouch-Control-Panel CP39xx-0000 with DVI/USB-Extended
- 15,6-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
- DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50m from the PC
- USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
- DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
power supply unit in the backplane
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
All contacs and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
|
Beckhoff Vietnam
|
CP3916-1031-0010
|
- Multitouch-Control-Panel CP39xx-0000 with CP-Link4
- 15,6-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
PPush-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
All contacs and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3916-1032-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
– DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50 m from the PC.
– USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
– DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- Status of all switching elements readable by one NO contact via USB
- All LEDs are connected via USB
- Additionally all switching elements are directly wireable with a
second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3916-1032-0010
|
Multi-touch Control Panel with CP-Link 4
- 15,6 inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with integrated or separate 24 V DC power supply depending
on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply.
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- Status of all switching elements readable by one NO contact via USB
- All LEDs are connected via USB
- Additionally all switching elements are directly wireable with a
second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3916-1035-0000
|
Multi-touch Control Panel integrated DVI/USB extension technology
CP3916-1035-0010
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
- DVI-E and USB-E 2.0 enable remote panel operation
at a distance of up to 50 m from the PC.
- USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.D
- DVI-E input is compatible to the standard DVI output of a PC.
connection via 3 round connectors (IP 65) for DVI, USB_E 2.0
and 24 V power supply unit in the backplane
24 V power supply
operating temperature 0…55 °C
customised push-button extension
- push-button extension on the bottom side
- 8 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminum cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3916-1035-0010
|
Multi-touch Control Panel with CP-Link 4
CP3916-1035-0010
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
customised push-button extension
- push-button extension on the bottom side
- 8 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminum cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3916-1040-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
Customized Push-button extension
- push-button extension on the bottom side
- 7 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 1 key switch latching, 1x90° form-l, key removal positon 0
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the backside
- All signal lamps are transmitted via USB only.
- C9900-M753 rotatable and tiltable mounting arm adapter for Control
Panel with push-button extension C9900-Gxxx for Rittal and Rolec
mounting arm systems with 48 mm tube from bottom
|
Beckhoff Vietnam
|
CP3916-1045-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
Push-button extension for CP3916 with landscape 15.6 inch display
- push-button extension on the bottom side
- 8 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- All push-buttons are directly wireable with
two normally-open contacts via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the backside
- All signal lamps are directly wireable via
terminal row.
|
Beckhoff Vietnam
|
CP3916-1052-0010
|
Multi-touch Control Panel CP3916-1052-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
Push-button extension for CP3916 with landscape 15.6 inch display
- push-button extension on the bottom side
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 6 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 2 Key switch RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons and key switch readable by one contact
via USB
- Additionally all push-buttons and key switch are directly wireable
with a second normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
C9900-E274 1-port USB socket
|
Beckhoff Vietnam
|
CP3916-1053-0010
|
Multi-touch Control Panel CP3916-1053-0010 with CP-Link 4
SAP674352
- 15.6-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- C9900-M753 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter,
USB-A with screw-on cap IP65, accessible from outside
- C9900-G024 customised push-button extension
- push-button extension on the bottom side
- 7 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 key switch, type RAFI RAFIX 22FS+, round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open/normally-closed contact via a terminal row
- All signal lamps are transmitted via USB only
|
Beckhoff Vietnam
|
CP3916-1055-0010
|
- Multitouch-Control-Panel CP3916-1055-0010 with CP-Link4
- 15,6-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi finger touch screen without logo
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
C9900-M752
rotatable and tiltable mounting arm adapter for Control Panel
CP3911 to CP3924 with push-button extension C9900-Gxxx for
Rittal and Rolec mounting arm systems with 48 mm tube from top
C9900-E274
1-port USB socket at the mounting arm adapter C9900-M75x for
Control Panel CP39xx or inside the connector block of CP39xx at basic
configuration without mounting arm adapter, USB-A with screw-on cap
IP 65, accessible from outside
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 7 push-button type RAFI RAFIX 22FS+
All contacs and LED, directly wireable via a terminal row
- Gracodewsitch, 16 positions, via USB
- printed scala for Grycodeswitch on th aluminum
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via M20 cable gland
|
Beckhoff Vietnam
|
CP3916-1056-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 15.6 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
- 15 inch touch screen with customised imprint "JASA"
- C9900-M575 vertical orientation of the display inside the Control
Panel
|
Beckhoff Vietnam
|
CP3916-1062-0010
|
- Multitouch-Control-Panel CP39xx-0010 with CP-Link4
- 15,6-inch-display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi finger touch screen with Eutect Logo
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
Push-button extension on the bottom side
- 1 e-stop button type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- 1 selector switch type RAFI RAFIX 22FS+,
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
C9900-M752
rotatable and tiltable mounting arm adapter for Rittal and Rolec
mounting arm systems with 48 mm tube from top
C9900-E274
1-port USB socket at the mounting arm adapter USB-A with screw-on cap
IP 65, accessible from outside
|
Beckhoff Vietnam
|
CP3916-1063-0000
|
- Multitouch-Control-Panel CP39xx-0000 with DVI/USB-Extended
- 15,6-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
- DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50m from the PC
- USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
- DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
power supply unit in the backplane
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
- C9900-F076 15 inch touch screen with customised imprint
"Graniten". instead of Beckhoff imprint
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
all contacs and LED, directly wireable via a terminal row
- labels for push-button caps allow individual marking.
- supply of the push-button extension via 19 pole round
connector in the push-button extension lid, including assembly.
|
Beckhoff Vietnam
|
CP3916-1400-0010
|
Multi-touch Control Panel CP3916-1400-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
Stainless steel housing 1.4404 with glass front
protection class IP 65
front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…45 °C
Options (sold separately):
- C9900-M759 Rotatable mounting arm adapter stainless steel,
matt ground. Mounting arm installation from top/bottom
delivery condition: support mounting arm addapter from top
- C9900-M735 Flange with welded tube for mounting
- C9900-M736 Flange for 48mm tube (must be welded) for
mounting
|
Beckhoff Vietnam
|
CP3916-1401-0010
|
Multi-touch Control Panel CP3916-1401-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
Stainless steel housing 1.4404 with glass front
protection class IP 65
front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…45 °C
push-button area underneath the display:
- Emergency Stop
- three PCB with ring illumination
- RFID optional
Options (sold separately):
- C9900-M759 Rotatable mounting arm adapter stainless steel,
matt ground. Mounting arm installation from top/bottom
delivery condition: support mounting arm addapter from top
- C9900-M735 Flange with welded tube for mounting
- C9900-M736 Flange for 48mm tube (must be welded) for
mounting
|
Beckhoff Vietnam
|
CP3916-1414-0010
|
Multi-touch Control Panel CP3916-1414-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
Stainless steel housing 1.4404 with glass front
protection class IP 65
front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
USB-A Port with screw-cap inside the connection area
operating temperature 0…45 °C
push-button area underneath the display:
- Emergency Stop RAFI FS22+
2 x NC on 4pin round connector
1 x NO via USB
- 3 short travel buttons with ring illumination
each with 1 x NO and RGBW LED via USB
Options (sold separately):
- C9900-M759 Rotatable mounting arm adapter stainless steel,
matt ground. Mounting arm installation from top/bottom
delivery condition: support mounting arm addapter from top
- C9900-M735 Flange with welded tube for mounting
- C9900-M736 Flange for 48mm tube (must be welded) for
mounting
- C9900-M764 10° Adapter between mounting arm adapter and ControlPanel
- C9900-E299 USB A Port with screwcap inside the mounting arm adapter
|
Beckhoff Vietnam
|
CP3916-1416-0010
|
Multi-touch Control Panel CP3916-1416-0010 with CP-Link 4
- 15.6-inch display 1366 x 768
Stainless steel housing 1.4404 with glas front
protection class IP 65
customised front-foil laminated on multi-finger touch screen "Baumann"
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…45 °C
Customised push-button area underneath the display:
- Emergency Stop
- five PCB with ring illumination
- RFID fitted
Must be ordered separately:
- C9900-M759 Rotatable mounting arm adapter, stainless steel, matt
ground. mounting arm installation from top/bottom
- C9900-M735 Flange with welded tube or
C9900-M736 Flange for 48mm tube (must be welded)
|
Beckhoff Vietnam
|
CP3918-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3918-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3918-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3918-1003-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3918-1003
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter plate
operating temperature 0 ... 55 °C
- C9900-M575 vertical orientation of the display inside the
Control Panel
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top
- Supply of the push-button extension via 19 pin round connector
within the mounting arm adapter plate.
Enclosed the mating connector with contacts
- logo imprint on the Multi finger touch screen
- Customised push-button extension
- without assembly
- aluminium cable channel to the mounting arm adapter on
the backside
- imprint on the aluminum housing
|
Beckhoff Vietnam
|
CP3918-1007-0000
|
- Multitouch-Control-Panel with DVI/USB-Extended
- 18,5-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
- DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50m from the PC
- USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
- DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
power supply unit in the backplane
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency stop key, type RAFI RAFIX 22FS+, 2x NC and 1 x NO
contact, directly wireable via a terminal row
- 3 push-button keys with LED, type RAFI RAFIX 22FS+,
2 x NO contacts, with LED, directly wireable via a terminal row
- labels for push-button caps for individual marking of each
push-button
- supply of the push-button extension via M20 cable gland
|
Beckhoff Vietnam
|
CP3918-1007-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 18,5-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with integrated or separate 24 V DC power supply depending
on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply.
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop, 2x NC and 1 x NO, type RAFI RAFIX 22FS
- 3 push-button keys, 2 x NO, with LED, type RAFI RAFIX 22FS
- all contacts for directly wireable
- Supply via M20 cable gland
|
Beckhoff Vietnam
|
CP3918-1009-0000
|
- 18,5-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
– DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50 m from the PC.
– USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
– DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- Status of all switching elements readable by one NO contact via USB
- All LEDs are connected via USB
- Additionally all switching elements are directly wireable with a
second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3918-1009-0010
|
- 18,5-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with integrated or separate 24 V DC power supply depending
on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply.
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- Status of all switching elements readable by one NO contact via USB
- All LEDs are connected via USB
- Additionally all switching elements are directly wireable with a
second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3918-1013-0000
|
- Multitouch-Control-Panel CP39xx-0000 with DVI/USB-Extended
- 18,5-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated DVI/USB extension technology
- DVI-E and USB-E 2.0 enable remote panel operation at a distance of
up to 50m from the PC
- USB-E 2.0 transmits USB 2.0 with 480 Mbit/s.
- DVI-E input is compatible to the standard DVI output of a PC.
- connection via 3 round connectors (IP 65) for DVI, USB-E 2.0 and 24V
power supply unit in the backplane
- 24 V power supply
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
All contacs and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3918-1013-0010
|
- Multitouch-Control-Panel CP39xx-0000 with CP-Link4
- 18,5-Zoll-Display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
All contacs and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
|
Beckhoff Vietnam
|
CP3918-1020-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
- Customised push-button extension
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round
- 1 key switch, type RAFI RAFIX 22FS+ Kompakt
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 6 blind plugs, type RAFI RAFIX 22FS
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- C9900-M481 Toolboard for keyboard, mounted under the
Control Panel, with integrated 2port-USB socket IP 65 at the back
side.
|
Beckhoff Vietnam
|
CP3918-1025-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-F763 without logo imprint on the Multi finger touch screen
|
Beckhoff Vietnam
|
CP3918-1026-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
- C9900-M751 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with 48 mm
tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter C9900-M75x
for Control Panel CP39xx or inside the connector block of
CP39xx at basic configuration without mounting arm adapter,
USB-A with screw-on cap IP65, accessible from outside
- C9900-F763 without logo imprint on the Multi finger touch screen
|
Beckhoff Vietnam
|
CP3918-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3918-1035-0000
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
customised push-button extension
- push-button extension on the bottom side
- 10 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3918-1035-0010
|
Multi-touch Control Panel CP3918-1035-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
customised push-button extension
- push-button extension on the bottom side
- 10 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3918-1042-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768 Aluminium housing with glass front,
protection class IP 65 Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V
power supply in the mounting arm adapter plate operating
temperature 0 ... 55 °C
- Customised push-button extension
- push-button extension on the bottom side
- 4 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round,30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Label holder allow individual marking of each push-
button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a
second normally-open contact via a terminal row
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only
- 1 port USB socket with screw-on cap IP65
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- C9900-M753 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm tube
from bottom
- Logo imprint on the Multi finger touch screen
- Toolboard for keyboard or tools, mounted under the Control Panel
|
Beckhoff Vietnam
|
CP3918-1043-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 18.5 inch display 1366 x 768 Aluminium housing with glass front,
protection class IP 65 Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V
power supply in the mounting arm adapter plate operating
temperature 0 ... 55 °C
- Customised push-button extension
- push-button extension on the bottom side
- 4 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round,30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Label holder allow individual marking of each push-
button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a
second normally-open contact via a terminal row
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only
- 1 port USB socket with screw-on cap IP65
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- C9900-M752 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm tube
from top
- Logo imprint on the Multi finger touch screen
- Toolboard for keyboard or tools, mounted under the Control Panel
|
Beckhoff Vietnam
|
CP3918-1046-0010
|
Multi-touch Control Panel CP3918-1046-0010 with CP-Link 4
- 18.5-inch display 1920 x 1080 (Full HD)
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter plate, additional M12 round connector for
optional 24 V power supply
operating temperature 0…50 °C
Support arm adapter from above, rotatable and tiltable
Rear side mounted an Ethernet wall feed-through
|
Beckhoff Vietnam
|
CP3918-1047-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- Full HD 18.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter.
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- mounting arm adapter from top
- lateral 1 port USB socket in the mounting arm connection area
- handle on the bottom side
- push-button extension with:
- Emergency Stop
- 2 lines of buttons with 9 possible buttons each
- push-buttons can be labeled with slide-in labels
14 push-buttons are equipped. The rest is for the assembly of
Push-buttons. All push-buttons are wirde directly.
The wiring is done via two 19pole and one 12pole circular
connectors
|
Beckhoff Vietnam
|
CP3918-1049-0010
|
Multi-touch Control Panel CP3918-1049-0010 with CP-Link 4
- 18.5-inch display 1920 x 1080 (Full HD)
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter plate, additional M12 round connector for
optional 24 V power supply
operating temperature 0…50 °C
Support arm adapter from above, rotatable and tiltable
Rear side mounted an Ethernet wall feed-through
Customised EtherCAT push-button extension under the display
|
Beckhoff Vietnam
|
CP3918-1051-0010
|
Multitouch Control Panel with CP-Link4 interface
- 18.5 inch display 1366 x 768
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via Cat&a cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
For mounting four M6 threaded holes at a distance of 100 x 100 mm in
the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- Customised push-button extension
- 6 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round
- 1 key switch, type RAFI RAFIX 22FS+ Kompakt
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 3 blind plugs, type RAFI RAFIX 22FS
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- Connection over M20 cablegland in the backplane
- C9900-M481 Toolboard for keyboard, mounted under the
Control Panel, with integrated 2port-USB socket IP 65 at the back
side.
|
Beckhoff Vietnam
|
CP3918-1052-0010
|
Multitouch-Control-Panel CP39xx-0010 with CP-Link4
- 18,5-inch-display 1366 x 768
aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
Push-button extension on the bottom side
- 1 e-stop button type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- 1 keyswitch type RAFI RAFIX 22FS+ compact,
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only.
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- USB Port at the push button extension
C9900-M752
rotatable and tiltable mounting arm adapter for Rittal and Rolec
mounting arm systems with 48 mm tube from top
C9900-E274
1-port USB socket at the mounting arm adapter C9900-M75x
C9900-M406
Toolboard for keyboard or tools, mounted under a
Control Panel with integrated USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP3918-1400-0010
|
Multi-touch Control Panel CP3918-1400-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
Stainless steel housing 1.4404 with glass front
protection class IP 65
front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…45 °C
Options (sold separately):
- C9900-M759 Rotatable mounting arm adapter stainless steel,
matt ground. Mounting arm installation from top/bottom
delivery condition: support mounting arm addapter from top
- C9900-M735 Flange with welded tube for mounting
- C9900-M736 Flange for 48mm tube (must be welded) for
mounting
|
Beckhoff Vietnam
|
CP3918-1401-0010
|
Multi-touch Control Panel CP3918-1401-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
Stainless steel housing 1.4404 with glass front
protection class IP 65
front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…45 °C
push-button area underneath the display:
- Emergency Stop
- three PCB with ring illumination
- RFID optional
Options (sold separately):
- C9900-M759 Rotatable mounting arm adapter stainless steel,
matt ground. Mounting arm installation from top/bottom
delivery condition: support mounting arm addapter from top
- C9900-M735 Flange with welded tube for mounting
- C9900-M736 Flange for 48mm tube (must be welded) for
mounting
|
Beckhoff Vietnam
|
CP3918-1405-0010
|
Multi-touch Control Panel CP3918-1405-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
Stainless steel housing 1.4404
protection class IP 65
customised front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…45 °C
For mounting 4 M8 bolts in the backplane for Rittal
mounting arm CP6555.500 from top or bottom
Customised push-button area underneath the display:
- Emergency Stop
- threefold PCB with ring illumination
The following connectors are available in the range of the mounting
arm adapter:
- 8pole connector IP65, CP-Link 4(use only CU8802 or C9900-E276)
- 19pole connector IP65, 24V DC power and wiring of the PCB
- 2 port USB socket with screw-on cap IP65
|
Beckhoff Vietnam
|
CP3918-1410-0011
|
Multi-touch Control Panel CP3918-1410-0011 with CP-Link 4
- 18.5-inch display
Stainless steel housing 1.4404, surface according B&S specification
with glass front, protection class IP 65
customised front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
operating temperature 0…40 °C
For mounting 6 M6 bolts in the mounting arm adapter area
- C9900-T327 18.5 inch display with Full HD resolution 1920 x 1080,
instead of Standard resolution 1366 x 768
- 1 x 2 port USB socket in the backplane, USB-A with rubber cap IP65
- Customised push-button area underneath the display:
- 19pole connector
- PCB with 1x ring illumination
- customised mounting screws in the backplane
The following connectors are available in the range of the mounting
|
Beckhoff Vietnam
|
CP3918-1414-0010
|
Multi-touch Control Panel CP3918-1401-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
Stainless steel housing 1.4404 with glass front
protection class IP 65
front-foil laminated on multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- splinter protection
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the connection area in the backplane
USB-A Port with screw-cap inside the connection area
operating temperature 0…45 °C
push-button area underneath the display:
- Emergency Stop RAFI FS22+
2 x NC on 4pin round connector
1 x NO via USB
- 3 short travel buttons with ring illumination
each with 1 x NO and RGBW LED via USB
- RFID optional
Options (sold separately):
- C9900-T327 18.5 inch display with Full HD resolution 1920 x 1080,
instead of Standard resolution 1366 x 768
- C9900-M759 Rotatable mounting arm adapter stainless steel,
matt ground. Mounting arm installation from top/bottom
delivery condition: support mounting arm addapter from top
- C9900-M735 Flange with welded tube for mounting
- C9900-M736 Flange for 48mm tube (must be welded) for
mounting
- C9900-M764 10° Adapter between mounting arm adapter and ControlPanel
- C9900-E299 USB A Port with screwcap inside the mounting arm adapter
|
Beckhoff Vietnam
|
CP3919-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3919-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 19-inch display 1280 x 1024
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3919-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 19-inch display 1280 x 1024
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3919-1004-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter plate
operating temperature 0 ... 50 °C
- C9900-E274 1 port USB socket at the mounting arm adapter
USB-A with screw-on cap IP65, accessible from outside
- C9900-M751 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm tube from
bottom
- Customised imprint on multi finger touch screen
|
Beckhoff Vietnam
|
CP3919-1008-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-E274 1 port USB socket at the mounting arm adapter. USB-A
with screw-on cap IP65, accessible from outside
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
- Customised push-button extension
- push-button extension on the bottom side
- 5 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 4 blind plugs, type RAFI RAFIX 22FS+
- Labels for push-button caps
- all push-buttons are directly wireable with a LED and a
normally-open contact
- Aluminium cable channel to the mounting arm adapter on the
backside
|
Beckhoff Vietnam
|
CP3919-1012-0010
|
Multitouch-Control-Panel CP39xx-0011 with CP-Link 4 (two cabel)
- 19-Zoll-Display 1280 x 1024
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with integrated or separate 24 V DC power supply depending
on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply.
- operating temperature 0…55 °C
- For mounting four M6 tapped holes at a distance of 100 x 100 mm in
the connection block on the rear wall.
- The plug connectors for connecting the Control Panel are plugged
into the connection block from underneath.
C9900-M753
rotatable and tiltable mounting arm adapter adapter for Control Panel
CP3912 to CP3924 with push-button extension C9900-Gxxx for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
C9900-E274
1-port USB socket at the mounting arm adapter C9900-M75x for Control
Panel CP39xx or inside the connector block of CP39xx at basic
confi guration without mounting arm adapter, USB-A with screw-on cap
IP 65, accessible from outside
Push-button extension on the bottom side
- 1 emergency-stop, Rafi, 2x NC
- 3 push button, Rafi, 1x NO and 1x NC with LED
- 1 keyswitch, Rafi, 1x NO and 1x NC
- 1 USB port
- Connection via M20 cabel gland
|
Beckhoff Vietnam
|
CP3919-1015-0000
|
Multitouch Control Panel CP3919-1015-0000 with DVI/USB
extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front,
front side protection class IP 65,
back side IP 20
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP and Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input compatible to standard DVI output of a PC
- USB-3.0 input for direct connection with a standard USB output
of a PC with distances up to 5m, 2-port USB-3.0 interface on the
control panel backside, limited to USB 2.0 when used with USB-E 2.0,
24V power supply, all connections on the backside
Operating temperature 0 ... 55 °C
Customized push-button extension underneath the touchscreen:
- 2 illuminated push-buttons, type RAFI RAFIX 22FS+, each one
normally opened contact and 1 LED
- 1 emergency stop key, 2 normally closed contacts, type RAFI
RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- Connection of the push-button extension via 12 pin connector
at the connection area of the panel
- Integrated handlebar
Mounting arm adapter:
- Mounting arm adapter for 48,3mm round tube with 3mm wall thickness,
rotatable adapter limited to +-90 degrees
|
Beckhoff Vietnam
|
CP3919-1023-0010
|
Multitouch Control Panel CP3919-1023-0010 with CP-Link 4
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-E274 1 port USB socket at the mounting arm adapter. USB-A
with screw-on cap IP65, accessible from outside
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
- Customised push-button extension
- push-button extension on the bottom side
- 4 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 5 blind plugs, type RAFI RAFIX 22FS+
- Labels for push-button caps
- connection via M20 cable gland in aluminium cable channel
- all push-buttons are directly wireable via one contact,
one contact + LED via USB
- Aluminium cable channel to the mounting arm adapter on the
backside
|
Beckhoff Vietnam
|
CP3919-1026-0010
|
Multi-touch Control Panel CP3919-1026-0010 with CP-Link 4
- 19-inch display 1280 x 1024
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter Modulee.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…55 °C
- C9900-F923 Touch screen for Multitouch Control Panel, landscape
with customised imprint type "Shanghai Tobacco Machinery", tri-color
- C9900-M750 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm tube
from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A with
screw-on cap IP65, accessible from outside
|
Beckhoff Vietnam
|
CP3919-1029-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 50 °C
- C9900-M750 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm tube
from top
- 1 port USB socket at the mounting arm adapter, USB-A with
screw-on cap IP65, accessible from outside
- C9900-M423 toolboard for keyboard or tools, mounted under the
Control Panel, with integrated 2x USB socket IP 65 at the
back side
|
Beckhoff Vietnam
|
CP3919-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024 pixel
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
- customised push-button extension
- push-button extension on the bottom side
- 9 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3919-1035-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 19-inch display 1280 x 1024
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0...50 °C
- customised push-button extension
- push-button extension on the bottom side
- 9 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3919-1045-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
Push-button extension for CP3919 with landscape 19 inch display
- push-button extension on the bottom side
- 9 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- All push-buttons are directly wireable with
two normally-open contacts via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the backside
- All signal lamps are directly wireable via
terminal row.
|
Beckhoff Vietnam
|
CP3919-1045-0000
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
– 19-inch display 1280 x 1024
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
– CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
– CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
Push-button extension for CP3916 with landscape 15.6 inch display
- push-button extension on the bottom side
- 8 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each push-button
- All push-buttons are directly wireable with two normally-open contacts via a
terminal row.
- Aluminium cable channel to the mounting arm adapter on the backs
- All signal lamps are directly wireable via terminal row.
|
Beckhoff Vietnam
|
CP3919-1051-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3919-1051-0000
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 50 °C
- Customised push-button extension
- push-button extension on the bottom side
- 9 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- 2 port USB socket at the mounting arm adapter, USB-A with rubber
cap IP65, accessible from outside
- Supply of the push-button extension via 19 pin round connector
within the mounting arm adapter, including assembly.
Enclosed the mating connector WITHOUT contacts.
- Mounting arm option C9900-M752: rotatable and tiltable mounting
arm adapter from top or mounting arm option C9900-M753 rotatable
and tiltable mounting arm adapter from bottom MUST be ordered
separately
- Option C9900-M419 Toolboard for keyboard without USB socket IP65
can be ordered separately
|
Beckhoff Vietnam
|
CP3919-1053-0011
|
Multi-touch Control Panel CP3919-1053-0011 with CP-Link 4
Mock-Up
- 19-inch display 1280 x 1024
- multi-finger touch screen PCT V03/V04 black
aluminium housing with glass front, protection class IP 54
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
Protection class: IP 54
operating temperature 0…45 °C
Mounting arm adapter plate on the rear side with:
- 4x M6 tapped holes, 100 x 100 mm
- 2x USB A connector behind rubber cap
- 1x USB A connector behind protection cap
- M12 connector, CP-Link 4
- M6 grounding stud
- 19 pole connector
Push-button extension on the right side with Rafi PCB, Vers. Sensorik
Emergency Stop, key switch, signal lamp and push-button, mounting via
19 pole connector.
|
Beckhoff Vietnam
|
CP3919-1055-0010
|
Multitouch-Control-Panel CP3919-1055-0010
- 19-Zoll-Display 1280 x 1024
aluminium housing with glass front, protection class IP 65
multifinger touch screen
- multifinger touch screen driver for Windows 7
- multifinger touch screen driver for Windows 7
- singlefinger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with integrated or separate 24 V DC power supply depending
on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply.
- operating temperature 0…55 °C
C9900-M750
rotatable and tiltable mounting arm adapter adapter for Control Panel
CP3912 to CP3924 for Rittal and Rolec mounting arm systems with
48 mm tube from top
|
Beckhoff Vietnam
|
CP3919-1060-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen with Salvagnin Logo
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are in the middle of the connection block
|
Beckhoff Vietnam
|
CP3919-1066-0011
|
Multi-touch Control Panel CP3919-1066-0011 with CP-Link 4
SAP-No. Trumpf: 2397242
- 19-inch display 1280 x 1024
- Multi-touch PCT V03/V04 black
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V
DC power supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…50 °C
- For mounting four M6 tapped holes at a distance of 75 x 75 mm
and four M4 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- 2 port USB socket inside the connector block, USB-A with screw-on
cap IP65, accessible from outside
- 1 port USB socket inside the connector block, USB-A with screw-on
cap IP65, accessible from outside
- Front covered with transport protection film
|
Beckhoff Vietnam
|
CP3919-1067-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 19-inch display 1280 x 1024, with extended viewing
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- C9900-M575 vertical orientation of the display inside the
Control Panel
- C9900-M751 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter,
USB-A with screw-on cap IP65, accessible from outside
|
Beckhoff Vietnam
|
CP3919-1068-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-E274 1-port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP 65, accessible from outside
- 3 threaded holes in the bottom of the CP, for mountig a
Keyboard shelf C9900-M419
- touch screen with customised imprint "Emag", monochrome,
instead of Beckhoff imprint
|
Beckhoff Vietnam
|
CP3919-1085-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
– 19-inch display 1280 x 1024
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
– CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
– CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
Connection block with 4 M6 tapped holes at a distance of 70 x 130 mm
on a CP39xx-0010 rear wall, for mounting arm adapter C9900-M761, C9900-M763 or C9900-M288.
Instead of connection block with 4 M6 tapped holes at a distance of 100 x 100 mm. 2x USB 1 port.
Connectors are standing and centered.
|
Beckhoff Vietnam
|
CP3919-1507-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 19 inch display 1280 x 1024
- vertical orientation of the display inside the Control Panel
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter
operating temperature 0 ... 55 °C
- rotatable and tiltable mounting arm for Rittal and Rolec mounting
arm systems with 48 mm tube from top or bottom
- bracket with a fixed 120° angle for installation of the push-button
extension to the Control Panel
- push-button extension with:
- Customized imprint at the aluminum frame "Nukon"
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 1 key switch, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of the push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- The key switch is wired to the 19pole connector with 2 NO-contacts
via a terminal strip
- 1 Graycode switch T=32 via USB
- 1 joystick with 4 directions via USB
- 19pole connector for power supply of the Control Panel and the push-
button extension, wiring of the emergency stop and key switch
|
Beckhoff Vietnam
|
CP3921-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21.5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3921-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3921-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3921-1009-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
- Customized push-button extension:
- push-button extension on the bottom side
- 1 emergency stop (Rafi FS+)
- 12 illuminated push-buttons(Rafi FS+), round, 30mm
- 5 illumable selector switches (Rafi FS+), 3 position switch,
- 1 key switch, 3 position switch
- status of all switching elements readable by one contact via USB
- additionally all switching elements are directly wireable with a
second contact via a terminal row
- 1 USB-A Port with screw cap IP65
- Poti 10K, 250°, with scale
- RFID Mifare
- connection via M20 cable gland in the wiring area of the
mounting arm adapterplate
- individual labelling of the switching elements via slide-in
labels
- C9900-M752 rotatable and tiltable mounting arm adapter for Control
Panel with push-button extension for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- C9900-M406 Toolboard for keyboard or tools, mounted under the
Control Panel, with integrated USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP3921-1011-0010
|
Multi-touch Control Panel CP3921-1011-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+, 2 NC contacts
directly wireable via a terminal row and 1 NO contact
directly wireable via a terminal row
- 3 push-button keys type RAFI RAFIX 22FS+, 2 NO contacts,
with LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
|
Beckhoff Vietnam
|
CP3921-1012-0000
|
Multitouch Control Panel CP3921-1012 with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- Status of all switching elements readable by one NO contact via USB
- All LEDs are connected via USB
- Additionally all switching elements are directly wireable with a
second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
|
Beckhoff Vietnam
|
CP3921-1012-0010
|
Multitouch Control Panel CP3921-1012 with CP-Link4 interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
MMulti finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+,
- Status of all switching elements readable by one NO contact via USB
- All LEDs are connected via USB
- Additionally all switching elements are directly wireable with a
second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
|
Beckhoff Vietnam
|
CP3921-1016-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter plate
operating temperature 0 ... 55 °C
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- C9900-M575 vertical orientation of the display inside the
Control Panel
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top
- Supply of the push-button extension via 19 pin round connector
within the mounting arm adapter plate.
Enclosed the mating connector with contacts
- logo imprint on the Multi finger touch screen
- Customised push-button extension
- without assembly
- aluminium cable channel to the mounting arm adapter on
the backside
- imprint on the aluminum housing
|
Beckhoff Vietnam
|
CP3921-1025-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter plate
operating temperature 0 ... 55 °C
- customised push-button extension
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- all push-buttons are directly wireable with two normally-open
contacts via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted directly.
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
|
Beckhoff Vietnam
|
CP3921-1026-0000
|
Multitouch Control Panel CP3921-1026-0000
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter plate
operating temperature 0 ... 55 °C
Push-button extension
- push-button extension on the bottom side
- 1 emergency stop key, type RAFI RAFIX 22FS+
1 x NO via USB, 2 x NC directly wireable
- 3 Short travel buttons with RGB-LED ring illumination
LED and 1 x NO via USB
- 1 keyswitch
1 x NO via USB, 1 x NC directly wireable
|
Beckhoff Vietnam
|
CP3921-1026-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
Push-button extension
- push-button extension on the bottom side
- 1 emergency stop key, type RAFI RAFIX 22FS+
1 x NO via USB, 2 x NC directly wireable
- 3 Short travel buttons with RGB-LED ring illumination
LED and 1 x NO via USB
- 1 keyswitch
1 x NO via USB, 1 x NC directly wireable
|
Beckhoff Vietnam
|
CP3921-1028-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 50 °C
- customised push-button extension
- Emergency stop, type RAFI FS+
2 x NC for direkt wiring, 1 x NO via USB
- 8 push-buttons, type RAFI FS+
For each 1 x NO for direct wiring, 1 x NO and LED via USB
- 2 blindcaps , for updating with 2 RAFI FS+ Buttons
Each with 2 x NO and LED for direct wiring
- 1 graycode switch with 22 positions, all contacts via USB
- aluminium cable channel to the mounting arm adapter on the back
- M20 cable gland inside the mounting arm adapter
- C9900-M406
keyboard shelf with integreated USB port at the backside
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top
|
Beckhoff Vietnam
|
CP3921-1031-0000
|
Multitouch Control Panel CP3921-1031 with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+
All contacs and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
|
Beckhoff Vietnam
|
CP3921-1031-0010
|
Multi-touch Control Panel CP3921-1031 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 3 push-button keys type RAFI RAFIX 22FS+
All contacs and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
|
Beckhoff Vietnam
|
CP3921-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3921-1035-0000
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
customised push-button extension
- push-button extension on the bottom side
- 12 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminum cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel!
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3921-1035-0010
|
Multi-touch Control Panel CP3921-1035-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
customised push-button extension
- push-button extension on the bottom side
- 12 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3921-1036-0000
|
CP3921-1036-0000, Leifeld
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter plate
operating temperature 0 ... 55 °C
- rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from bottom
- C9900-E274
1-port USB socket at the mounting arm adapter C9900-M75x
- push-button extension:
- Emergency stop, 2x NC direct wired
- 1 keyswitch
- 5 buttons
- 1 Button on the bakside
- connector 19 pole, IP 65, for power supply and emergency-stop
|
Beckhoff Vietnam
|
CP3921-1045-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21.5 inch display 1280 x 1024
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
Push-button extension for CP3921 with landscape 21.5 inch display
- push-button extension on the bottom side
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- All push-buttons are directly wireable with
two normally-open contacts via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the backside
- All signal lamps are directly wireable via
terminal row.
|
Beckhoff Vietnam
|
CP3921-1045-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
Push-button extension for CP3921 with landscape 21.5 inch display
- push-button extension on the bottom side
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+, round,
30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- All push-buttons are directly wireable with
two normally-open contacts via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the backside
- All signal lamps are directly wireable via
terminal row.
|
Beckhoff Vietnam
|
CP3921-1065-0010
|
Multi-touch Control Panel CP3921-1049-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
- aluminium housing with glass front, protection class IP 65
- multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
- integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0...50 °C
Mounting arm adapter
- from top
- USB Port
Push-button extension "left" and "right"
- aluminium housing, protection class IP 65
- housing in the design of Control Panel
- 32 short-travel keyswitches
- 2 light states per red and green LED for backlight of the
push-buttons
- slide-in labels for individual marking of the push-buttons
Push-button extension "bottom"
- aluminium housing, protection class IP 65
- housing in the design of Control Panel
- Emergency Stop
- Cam switch
- 7 key switches
- connection via CX8093
Additional keyboard KT100 with trackball
- aluminium housing, protection class IP 65
- housing in the design of Control Panel
- unbreakable keyboard,german layout, USB-connector
- integrated trackball with 2 mouse keys, USB interface and removable
ball
- english-layout
- integrated electronic-key-system, type Euchner "EKS-A-Compact
Version via USB
- handle at the bottom side
Bracket with an adjustable 90° to 180° angle for installation of the
keyboard
|
Beckhoff Vietnam
|
CP3921-1072-0000
|
Multitouch Control Panel CP3921-1072 with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 2 push-button keys type RAFI RAFIX 22FS+
- 1 key switch type RAFI RAFIX 22FS+, 1x90° form-V, latching,
key removal position 0
All contacts and LED, directly wireable via a terminal row
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a M20 cable gland in
the push-button extension lid
- 1 USB-A port behind a screw-on cap IP65
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems
with 48 mm tube from top
|
Beckhoff Vietnam
|
CP3921-1082-0010
|
- Multitouch-Control-Panel CP3921-1082-0010 with CP-Link4
- 21,5-inch-Display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi finger touch screen with Salvagnini logo
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
operating temperature 0 ... 50 °C
Mounting-arm plate
- 4x M6 holes in a distance of 100mm x 100mm
- RJ45 socket with silicon cap
- 2 USB ports with silicon cap
- 1 USB port behind screwcap
- Connectors:
- CP-Link4(use only CU8802 or E274)
- RJ45
- 19pin for buttons and 24V Power supply
- M12 cable gland for 5V
Push-button extension on the bottom side
- 1 emergency-stop type RAFI RAFIX 22FS+
- 2 push-button white and blue type RAFI RAFIX 30FS+
- 1 key switch type RAFI RAFIX 30FS+
special key 003
- All contacts and LED are directly wired on 19pin connector
- Labels for push-button caps allow individual marking.
- Supply of the push-button extension via a 19pin round-connector in
the push-button extension lid
- 24v to 5V power supply inside the push button extension max 2.5A.
for barcode scanner
- 3 threaded holes in the bottom of the CP for keyboard shelf or
handle
C9900-Z468 Adapter cable Display Port to DVI, 40 cm, is enclosed with
the delivery
|
Beckhoff Vietnam
|
CP3921-1085-0011 Trumpf
|
Multi-touch Control Panel CP3921-1085-0011 with CP-Link 4
SAP-No. Trumpf: 2357419
- 21.5-inch display 1920 x 1080
- multi-finger touch screen PCT V03/V04 black
aluminium housing with glass front, protection class IP 65
- multi-finger touch screen driver for Windows 7
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
protection class: IP54
operating temperature range 0 … 45 °C
Connection block above the mounting arm adapter plate with:
- M12 connector, Emergency Stop
- reserved for fieldbus
- M12 connector, 24 V power supply
- M6 grounding bolt
Mounting arm adapter plate on the back side with:
- 4x M6 tapped holes in support arm adapter 250 x 100 mm
- 2x USB A socket under a rubber cap
- 1x USB-A socket under a screw cap
Push-button extension provided on the right
|
Beckhoff Vietnam
|
CP3921-1087-0010
|
Multi-touch Control Panel CP3921-1087-0010 with CP-Link 4
- 15.6-inch display 1920 x 1080
aluminum housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter Module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
operating temperature 0…50 °C
- C9900-M752 rotatable and tiltable mounting arm adapter for
Control Panel for Rittal and Rolec mounting arm systems with
48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- Customised push-button extension
- 1 emergency-stop type RAFI RAFIX 22FS+, 2 NC contacts and
1 NO contact
- 1 push-button key green, type RAFI RAFIX 22FS+, 2 NO contacts,
with LED
- 1 push-button key red, type RAFI RAFIX 22FS+, 1 NO and 1 NC
contact with LED
- 1 key switch type RAFI RAFIX 22FS+, 2 NO contacts, with LED
- Status of all switching elements readable by one NO contact
via USB
- Additionally all switching elements are directly wireable with
a second NO contact via a terminal row
- Labels for push-button caps allow individual marking.
- 1 USB-A port behind a screw-on cap IP65
- Supply of the push-button extension and the Control Panel via
19 pin round connector within the mounting arm adapter plate,
including assembly. Enclosed the mating connector with contacts.
|
Beckhoff Vietnam
|
CP3921-1091-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- 2x C9900-E274 1-port USB socket, USB-A with screw-on cap
- Push-button extension
- push-button extension on the bottom side
- 1 Emergency Stop, type RAFI RAFIX 22FS+
1x NO via USB, 2x NC directly wireable
- 3 short travel buttons with RGB-LED ring illumination
LED and 1x NO via USB
- lable for short travel buttons
- 1 keyswitch, Rafi Rafix 22FS+ Compact, 1x NC directly wireable
|
Beckhoff Vietnam
|
CP3921-1098-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21.5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
Control Panel backplane
operating temperature 0 ... 55 °C
- black multi-finger touch screen with customised imprint
- rotatable and tiltable mounting arm for Rittal and Rolec mounting
arm systems with 48 mm tube from top.
The tilt can be locked with a clamping lever
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- customised push-button extension
- bracket with a fixed 120° angle for installation of the
Push-button extension to the Multitouch Control Panel
- handle on the bottom side of the push-button extension
- connector 19 pole for power supply and wirining of the push-
button extension inside the mounting arm adapter
|
Beckhoff Vietnam
|
CP3921-1099-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21.5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-F094 touch-screen with customer specific imprint type
"Aumann", bi-color, instead of imprint Beckhoff on touch-screen
- Customised push-button extension
- Supply of the push-button extension via 19 pin round connector
within the mounting arm adapter plate, including assembly.
Enclosed the mating connector with contacts.
- C9900-E274 1 port USB socket at the mounting arm adapter. USB-A
with screw-on cap IP65, accessible from outside
Rotatable and tiltable mounting arm adapter C9900-M752/C9900-M753
for Rittal and Rolec mounting arm systems with 48 mm tube from top
must be ordered separately!
|
Beckhoff Vietnam
|
CP3921-1100-0010
|
Multitouch Control Panel with CP-Link4
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a CAT 7 cable
with separate 24 V DC power supply over 19pin connector in the cover
4 M6 holes 70 x 130 mm for mounting arm adapter
3 holes at the bottom for mounting C9900-M419, C9900-M361 or C9900-M989
operating temperature 0 ... 50 °C
- customised push-button extension
- e-stop (RAFI FS22+)
- 4 Buttons (RAFI FS22+)
- 2 encoder (EBE CESI)
- Keyswitch (EBE S60)
- Keyswitch (RAFI FS22+)
- enableing switch inside the cover of teh push button extension
(Euchner)
- 1 port USB socket on the side of the cable duct, USB-A with
screw-on cap IP65, accessible from outside
Connectors inside the conection area:
- CP-Link4
- Power
- 19 pin M23(for buttons),
- EtherCAT
C9900-M406 Keyboard shelf with integrated USB port
C9900-M761 Mounting arm, mounted ex works from top
|
Beckhoff Vietnam
|
CP3921-1101-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
- Customised push-button extension
- 19 pole connector and EtherCAT connector in the cable channel
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
|
Beckhoff Vietnam
|
CP3921-1103-0010
|
Multitouch-Control-Panel CP3921-1076-0010 with CP-Link4
- 21,5-inch-Display 1920 x 1080
aluminium housing with cusomizued glass front,
- protection class front IP 65, rear IP54
- Multi finger touch screen with DMG logo
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to 100m
from the PC via a Cat.6A cable with integrated or separate 24 V DC
power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4
operating temperature 0 ... 50 °C
the backside is coverd with a plastic hood
Push-button extension at the right side:
- customised glass front
Mounting arm adaptation:
- for 48,3mm round tubes
- tiltable +/-8°
Connectors:
- CP-Link4(use only CU8803)
|
Beckhoff Vietnam
|
CP3921-1112-0010
|
Multi-touch Control Panel CP3921-1112-0010 with CP-Link 4
- 21.5-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- customised push-button extension
|
Beckhoff Vietnam
|
CP3921-1500-0000
|
CNC Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter plate
operating temperature 0 ... 55 °C
- C9900-M753 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 3 buttons, red, green, white, controlled via USB, labelling via
slide-in label
- 45 PLC special keys with yellow LEDs, controlled via USB,
labelling via slide-in label
- 2x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- connector 19 pole, IP 65, for power supply and emergency-stop
- Button series with push-buttons on the bottom side of CNC push-
button extension
- 12 push-buttons, green, red, 10x white. 1x NO and LED readable
via USB, labelling via slide-in label
|
Beckhoff Vietnam
|
CP3921-1500-0010
|
CNC Multitouch Control Panel with CP-Link 4
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable. Only using this Panel with the
CU8802 or E267
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 55 °C
- C9900-M753 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 3 buttons, red, green, white, controlled via USB, labelling via
slide-in label
- 45 PLC special keys with yellow LEDs, controlled via USB,
labelling via slide-in label
- 2x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- connector 19 pole, IP 65, for power supply and emergency-stop
- Button series with push-buttons on the bottom side of CNC push-
button extension
- 12 push-buttons, green, red, 10x white. 1x NO and LED readable
via USB, labelling via slide-in label
|
Beckhoff Vietnam
|
CP3921-1502-0000
|
CNC Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter plate
operating temperature 0 ... 55 °C
- C9900-M752 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 3 buttons, red, green, white, controlled via USB, labelling via
slide-in label
- 45 PLC special keys with yellow LEDs, controlled via USB,
labelling via slide-in label
- 2x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- connector 19 pole, IP 65, for power supply and emergency-stop
- Button series with push-buttons on the bottom side of CNC push-
button extension
- 12 push-buttons, green, red, 10x white. 1x NO and LED readable
Via USB, labelling via slide-in label
|
Beckhoff Vietnam
|
CP3921-1502-0010
|
CNC Multitouch Control Panel with CP-Link 4
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable. Only using this Panel with the
CU8802 or E267
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 55 °C
- C9900-M752 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 3 buttons, red, green, white, controlled via USB, labelling via
slide-in label
- 45 PLC special keys with yellow LEDs, controlled via USB,
labelling via slide-in label
- 2x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- connector 19 pole, IP 65, for power supply and emergency-stop
- Button series with push-buttons on the bottom side of CNC push-
button extension
- 12 push-buttons, green, red, 10x white. 1x NO and LED readable
via USB, labelling via slide-in label
|
Beckhoff Vietnam
|
CP3921-1505-0000
|
CNC Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter plate
operating temperature 0 ... 55 °C
- C9900-M752 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 1 buttons, green, 1x NO direct wired and 1 x NO+ LED via USB,
labelling via slide-in label
- 1 buttons, red, 1x NC direct wired and 1 x NO+ LED via USB,
labelling via slide-in label
- 1 keyswitch, 2 position, 1x NC direct wired and 1 x NO via USB,
labelling via slide-in label
- 45 PLC special keys with yellow LEDs, controlled via USB,
labelling via slide-in label
- 2x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- connector 19 pole, IP 65, for power supply and emergency-stop
- Button series with push-buttons on the bottom side of CNC push-
button extension
- 12 push-buttons, green, red, 10x white. 1x NO and LED readable
Via USB, labelling via slide-in label
|
Beckhoff Vietnam
|
CP3921-1506-0000
|
CNC Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter plate
operating temperature 0 ... 55 °C
- Customized imprint at the aluminum frame "Nukon"
- C9900-M752 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 2 buttons, red, white, controlled via USB, labelling via
slide-in label
- 18 short stroke button with white LEDs, controlled via USB,
labelling via slide-in label
- 1x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- 1 joystick with 4 directions, controlled via USB
- connector 19 pole, IP 65, for power supply and emergency-stop
|
Beckhoff Vietnam
|
CP3921-1507-0000
|
CNC Multitouch Control Panel with DVI/USB extended interface
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 2 connectors IP 65 for DVI and USB-E 2.0 in the
mounting arm adapter plate
operating temperature 0 ... 55 °C
- Customized imprint at the aluminum frame "Nukon"
- C9900-M752 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 2 buttons RGB, labeled at the foil, controlled via USB
- 18 short stroke button with white LEDs, controlled via USB,
labelling via slide-in label
- 1x graycode switch with 32 positions, controlled via USB,
labeled at the foil
- 1 joystick with 4 directions, controlled via USB
- connector 19 pole, IP 65, for power supply and emergency-stop
|
Beckhoff Vietnam
|
CP3921-1509-0010
|
CNC Multitouch Control Panel with CP-Link 4
- 21,5 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable. Only using this Panel with the
CU8802 or E267
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 55 °C
- C9900-M752 rotatable and tiltable mounting arm for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- CNC push-button extension:
- Emergency stop, 2x NC direct wired, 1x NO via USB
- 3 buttons, red, green, white, controlled via USB, labelling via
slide-in label
- 45 PLC special keys with yellow LEDs, controlled via USB,
labelling via slide-in label
- 2x graycode switch with 32 positions, controlled via USB,
labelling via slide-in label
- connector 19 pole, IP 65, for power supply and emergency-stop
|
Beckhoff Vietnam
|
CP3924-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
|
Beckhoff Vietnam
|
CP3924-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3924-0011
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with separate 24 V DC power supply
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for 24 V power supply
operating temperature 0…55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
|
Beckhoff Vietnam
|
CP3924-1006-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-G027 customised push-button extension
- C9900-E274 1 port USB socket at the mounting arm adapter
|
Beckhoff Vietnam
|
CP3924-1007-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
C9900-M752
rotatable and tiltable mounting arm adapter for Control Panel
with push-button extension C9900-Gxxx for Rittal and Rolec
mounting arm systems with 48 mm tube from top
Coustomized Push-button extension for CP3924
- push-button extension on the bottom side
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 3 keyswitches , type RAFI RAFIX 22FS+
- 1 Signal indicators, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- coustomized imprint on the push-button extension
- Labels for push-button caps allow individual marking of each
push-button
- all push-buttons are directly wireable with two normally-open
contact via a terminal row
- aluminium cable channel to the mounting arm adapter on the backside
- 2 USB socket at the push-button extension, USB-A with screw-on cap
IP65
|
Beckhoff Vietnam
|
CP3924-1008-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
- C9900-G027 Customised push-button extension
- push-button extension on the bottom side
- 9 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 5 key switches with signal lamp, type RAFI RAFIX 22FS+ Compact,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a
Second normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- C9900-M406 Toolboard for keyboard or tools, mounted under the
Control Panel, with integrated USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP3924-1009-0010
|
Multi-touch Control Panel CP3924-1009-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…55 °C
- C9900-F869 Touch screen with customer specific imprint type
"Focke", monochrome
- 3 x 1 port USB socket inside the front, USB-A with screw-on cap
IP65, accessible from outside
- 1 x 1 port USB socket inside the mounting arm adapter, USB-A with
screw-on cap IP65
- C9900-M750 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm
tube from top
- 3 x M6 mounting holes for one toolboard for keyboard or tools at
the bottom side of the mounting arm adapter.
The Control Panel will be delivered without toolboard!
|
Beckhoff Vietnam
|
CP3924-1012-0010
|
Multi-touch Control Panel CP3924-1011-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…55 °C
- C9900-F869 Touch screen with customer specific imprint type
"Focke", monochrome
- 1 x 1 port USB socket edgeways in mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- 1 x 2 port USB socket edgeways in mounting arm adapter, USB-A
with rubber cap IP65, accessible from outside
- 1 x 1 port USB socket inside the mounting arm adapter, USB-A with
screw-on cap IP65
- C9900-M751 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm
tube from bottom
- 3 x M6 mounting holes for one toolboard for keyboard or tools at
the bottom side of the mounting arm adapter.
The Control Panel will be delivered without toolboard!
|
Beckhoff Vietnam
|
CP3924-1015-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3924-1015-0000
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 55 °C
Mounting holes for scanner holder C9900-M408 (right) or C9900-M409
(left) in the side aluminium housing
The Control Panel will be delivered without scanner holder and
without rotatable and tiltable mounting arm adapter C9900-M750 or
C9900-M751. These options must be ordered separately!
|
Beckhoff Vietnam
|
CP3924-1019-0010
|
Multi-touch Control Panel CP3918-1015-0010 with CP-Link 4
- 18.5-inch display 1366 x 768
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0...50 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection
block from underneath.
- C9900-E274 1 port USB socket at the mounting arm, USB-A with
screw-on cap IP65, accessible from outside
Push-button extension at the bottom side
- 1 emergency-stop (RAFI RAFIX 22FS+), 2 x NC directly wireable and
1 x NO via USB.
- 2 key switches (RAFI RAFIX 22FS+),
1 x latching, rotating angle 90°, Key removable in position 0+1
special closure
1 x momentary, rotating angle 40°, removable in position 0
1 x NO directly wireable and 1 x NO + LED via USB.
- 2 x illuminated push-buttons, type RAFI RAFIX 22FS+,
1 x flush lens, white cover
1 x protruding lens, yellow cover
1 x NO directly wireable and 1 x NO + LED via USB.
- M20 cable gland in the removable cover
- 3x M6 holes at the bottom side of the CP for tool board C9900-M418
|
Beckhoff Vietnam
|
CP3924-1020-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
C9900-M753
rotatable and tiltable mounting arm adapter for Control Panel
with push-button extension C9900-Gxxx for Rittal and Rolec
mounting arm systems with 48 mm tube from bottom
Coustomized Push-button extension for CP3924
- push-button extension on the bottom side
- 3 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 3 keyswitches , type RAFI RAFIX 22FS+
- 1 Signal indicators, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- coustomized imprint on the push-button extension
- Labels for push-button caps allow individual marking of each
push-button
- all push-buttons are directly wireable with two normally-open
contact via a terminal row
- aluminium cable channel to the mounting arm adapter on the backside
- 2 USB socket at the push-button extension, USB-A with screw-on cap
IP65
|
Beckhoff Vietnam
|
CP3924-1023-0010
|
Multi-touch Control Panel CP3924-1023-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated 24 V DC power
supply.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
operating temperature 0…50 °C
- C9900-M575 vertical orientation of the display
- C9900-F763 Multi finger touch screen without logo imprint
"Beckhoff"
- Label without Beckhoff logo
- C9900-M754 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top.
The tilt can be locked with a clamping lever
- RJ45 socket with silicon cap
- 2 USB ports with silicon cap
- 3 connectors for power supply and push-button extension
- C9900-E274 1 port USB socket at the mounting arm adapter,
USB-A with screw-on cap IP65, accessible from outside
- Customised push-button extension
|
Beckhoff Vietnam
|
CP3924-1024-0010
|
Multi-touch Control Panel CP3924-1024-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…55 °C
- 1 x 1 port USB socket edgeways in mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- 1 x 2 port USB socket edgeways in mounting arm adapter, USB-A
with rubber cap IP65, accessible from outside
- 1 x 1 port USB socket inside the mounting arm adapter, USB-A with
screw-on cap IP65
- C9900-M751 rotatable and tiltable mounting arm adapter for Control
Panel for Rittal and Rolec mounting arm systems with 48 mm
tube from bottom
- 3 x M6 mounting holes for one toolboard for keyboard or tools at
the bottom side of the mounting arm adapter.
- 3x M5 Befestigungslöcher für die Tastaturablage C9900-M486 an
der Unterseite des Control-Panels
- 3x M5 mounting holes for the toolboard C9900-M486 under the Control
Panel
The Control Panel will be delivered without toolboard!
|
Beckhoff Vietnam
|
CP3924-1025-0000
|
Multitouch Control Panel with DVI/USB extended interface
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the Control Panel backplane
operating temperature 0 ... 55 °C
For mounting four M6 tapped holes at a distance of 100 x 100 mm
in the connection block on the rear wall. The plug connectors for
connecting the Control Panel are plugged into the connection block
from underneath.
- C9900-E274 1-port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP 65, accessible from outside
- 3 threaded holes in the bottom of the CP, for mountig a
Keyboard shelf C9900-M419
- touch screen with customised imprint "Emag", monochrome,
instead of Beckhoff imprint
|
Beckhoff Vietnam
|
CP3924-1035-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3924-1035-0000
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
operating temperature 0 ... 55 °C
customised push-button extension
- push-button extension on the bottom side
- 13 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminum cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel!
- mounting arm adapter is not in in the CP price included
- is it not possible to order this CP without mountig arm adapter
|
Beckhoff Vietnam
|
CP3924-1035-0010
|
Multi-touch Control Panel CP3924-1035-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
customised push-button extension
- push-button extension on the bottom side
- 13 holes for push-button keys
for Rafi FS22+, Siemens 3SB3 or Eaton RMQ Titan
- 1 hole for emergency stop key
- aluminium cable channel to the mounting arm adapter on the
backside with 2 M20 cable gland
mounting arm adapter
- C9900-M753 or C9900-M752
- must be ordered in combination with the Control Panel
- mounting arm adapter is not in in the CP price included
- it is not possible to order this CP without mounting arm adapter
|
Beckhoff Vietnam
|
CP3924-1039-0010
|
Multi-touch Control Panel CP39xx-0010 with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- Customised push-button extension
- push-button extension on the bottom side
- 13 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
- C9900-E274 1 port USB socket at the mounting arm adapter, USB-A
with screw-on cap IP65, accessible from outside
- 2 port USB socket at the mounting arm adapter, USB-A with rubber
cap IP65, accessible from outside
- Supply of the push-button extension via 19 pin round connector
within the mounting arm adapter, including assembly.
Enclosed the mating connector WITHOUT contacts.
- 3x M5 mounting holes for the toolboard C9900-M486 under the Control
Panel
The Control Panel will be delivered without toolboard!
|
Beckhoff Vietnam
|
CP3924-1051-0000
|
Multitouch Control Panel with DVI/USB extended interface
CP3924-1051-0000
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
Integrated DVI/USB extension technology:
- DVI-E and USB-E 2.0 allow up to 50 m distance between the Panel and
the PC
- USB-E 2.0 transmits USB 2.0 with 480 MBit/s
- DVI-E input is compatible to the standard DVI output of a PC
connection over 3 connectors IP 65 for DVI, USB-E 2.0 and 24 V power
supply in the mounting arm adapter
operating temperature 0 ... 50 °C
- Customised push-button extension
- push-button extension on the bottom side
- 12 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 1 USB port at the pushbutton extension, with scre cap IP65
- Labels for push-button caps allow individual marking of each
push-button
- status of all push-buttons readable by one contact via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- Supply of the push-button extension via M20 cable gland
- Aluminium cable channel to the mounting arm adapter on the
backside
- All signal lamps are transmitted via USB only.
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from top
|
Beckhoff Vietnam
|
CP3924-1052-0010
|
Multitouch Control Panel with CP-link4 interface
CP3924-1052-0010
- 24 inch display 1920 x 1080
Aluminium housing with glass front, protection class IP 65
Multi finger touch screen
- Multi finger touch screen driver for Windows 7
- Single finger touch screen driver for Windows XP
integrated CP-Link 4 connection technology:
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via a Cat.6A cable with integrated or separate
24 V DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
connection via M12 round connector (IP 65) for CP-Link 4 in the
backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0 ... 50 °C
- Customised push-button extension
- push-button extension on the bottom side
- 1 emergency stop key, type RAFI RAFIX 22FS+
- 2 push-button keys with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 2 selector switches with signal lamp, type RAFI RAFIX 22FS+,
round, 30 mm
- 9 blindcaps
- Labels for push-button caps allow individual marking of each
push-button
- imprint for all buttons on the aluminum
- All push-buttons are with 2 NO + LED directly wireable
- Supply of the push-button extension via M20 cable gland
- Aluminium cable channel to the mounting arm adapter on the
backside
- C9900-M753 rotatable and tiltable mounting arm adapter for Rittal
and Rolec mounting arm systems with 48 mm tube from bottom
|
Beckhoff Vietnam
|
CP3924-1061-0010
|
Multi-touch Control Panel with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- Customised push-button extension
- Connection of the push-button extension via 19-pole connector
in the mounting arm adapter, incl. wiring
- C9900-E274 1 port USB socket at the mounting arm adapter.
USB-A with screw-on cap IP65, accessible from outside
- Connection block with 4 M6 tapped holes at a distance of 70 x 130 mm
on the rear wall, connectors are standing and centered
- C9900-M423 Toolboard for keyboard or tools, mounted under the
Control Panel, with integrated 2x USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP3924-1062-0010
|
Multi-touch Control Panel with CP-Link 4
- 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
multi-finger touch screen
- multi-finger touch screen driver for Windows 7
- single-finger touch screen driver for Windows XP and Windows CE 6
integrated CP-Link 4 connection technology
- CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 7 cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
- CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the mounting arm adapter
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- C9900-E274 1 port USB socket at the mounting arm adapter.
USB-A with screw-on cap IP65, accessible from outside
- Connection block with 4 M6 tapped holes at a distance of 70 x 130 mm
on the rear wall, for mounting arm adapter C9900-M761 or C9900-M763,
instead of connection block with 4 M6 tapped holes at a distance of
100 x 100 mm. Connectors are standing and centered
- C9900-M423 Toolboard for keyboard or tools, mounted under the
Control Panel, with integrated 2x USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP3924-1065-0010
|
Multi-touch Control Panel CP3924-1065-0010 with CP-Link 4
– 24-inch display 1920 x 1080
aluminium housing with glass front, protection class IP 65
Multi-finger touch screen
- multi-finger touch screen driver included in Windows 7 and
Windows 10
- single-finger touch screen driver available for Windows XP and
Windows CE 6
integrated CP-Link 4 connection technology
– CP-Link 4 enables remote panel operation at a distance of up to
100m from the PC via CAT 6A cable with integrated or separate 24 V
DC power supply depending on the transmitter module.
– CP-Link 4 transmits USB 2.0 with 100 Mbit/s and DVI.
Connection via M12 round connector (IP 65) for CP-Link 4
in the backplane
additional M12 round connector for optional 24 V power supply
operating temperature 0…50 °C
- C9900-M575 vertical orientation of the display inside the
Control Panel
- C9900-G037 push-button extension
- push-button extension on the bottom side
- 6 push-button keys with signal lamp, type RAFI RAFIX 22FS+
- 1 emergency stop key, type RAFI RAFIX 22FS+
- aluminium cable channel to the mounting arm adapter on the backside
- C9900-M752 rotatable and tiltable mounting arm adapter for Rittal and
Rolec mounting arm systems with 48 mm tube from top
- C9900-M406 toolboard for keyboard or tools, mounted under the
Control Panel, with integrated USB socket IP 65 at the back side
|
Beckhoff Vietnam
|
CP6001-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6001-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6001-0011-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6002-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6002-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6002-0010-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6002-0011-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6002-1008-0010 Mewag
|
CP6002-1008 Mewag
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo "MEWAG"
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6002-1012-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
Customized modifications:
- USB connector in the front (Coninvers), protection class IP65
- USB extender set Icron 410i on the backplate, for USB signal
transmission
|
Beckhoff Vietnam
|
CP6009-0001-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6011-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6011-1007-0000
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
Micro-Epsilon
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
Integrated options:
C9900-E101
- PS/2 keyboard socket in the Control Panel backplane, class of
protection IP20
C9900-E132
- PS/2 mouse socket in the Control Panel backplane
|
Beckhoff Vietnam
|
CP6012-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6019-0000-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6019-0001-0000
|
Built-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6021-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6021-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6021-1014-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys and LEDs
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- C9900-F259 Customer specific slide-in logo type EVG, instead of
Beckhoff logo
- C9900-F001 Customized label for PLC special keys at the
Control Panel, preassembled slide-in label in black and white
- C9900-E104 PS/2 keyboard socket in the Control Panel backplane
- C9900-E122 Serial port in the Control Panel backplane, d-sub 9 pin
|
Beckhoff Vietnam
|
CP6022-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6022-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6022-0002-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6029-0000-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6031-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6031-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6031-0002-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6031-1008-0010
|
CP6031-1008-0010X Ts Sander
|
Beckhoff Vietnam
|
CP6032-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6032-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6032-0002-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6303-0010-0010
|
Built-in Panel PC
Housing
- 3 slot housing
- one slot free for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on one side
- detailed PC configuration information on the housing
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0 to 55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- 2 port USB socket inside the front, DIN 8 pin with screw-on
cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- without keyboard
Features
- processor Intel® Celeron® 733 MHz
- slot motherboard with socket 370 for Intel® Celeron® or Pentium® III
- 3 slot passive backplane, 1 PCI slot available
- 128 MB SDRAM DIMM module, expandable to 512 MB
- on board graphic adapter, 2 MB, LCD interface, monitor connector
- DVI and USB interface to connect a Control Panel CP68xx or CP78xx
- on board ethernet adapter with 10/100 base-t connector
- hard disk, 2½ inch, 80 GB
- 2 serial ports RS232 and 2 USB ports
- PS/2 keyboard socket and PS/2 mouse socket
- 24 V DC power supply
This device configuration is not recommended for new projects.
As new standard configuraton the type CP6303-0010-0020 is available.
|
Beckhoff Vietnam
|
CP6500-1001-0080
|
Control cabinet PC
Housing
- 7 slot ATX industrial PC for control cabinet installation
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- protection class IP 20
- operating temperature 0 bis 55 °C
- weight of the basic configuration 10.7 kg
- dimensions (W x H x D) 333 x 308 x 166 mm (13.1" x 12.1" x 6.5")
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3: 50)
- ATX motherboard for 4th Generation Intel® Celeron®,
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe-x1 slots, 1 PCIe-x4 slot, 1 PCIe-x16 slot and 3 PCI slots
free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I,
1 DVI-D and 1 DisplayPort connector.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out; 4 USB 3.0, 2 of these USB ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6500-1001-0090
|
Control cabinet PC
Housing
- 7 slot ATX industrial PC for control cabinet installation
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- protection class IP 20
- operating temperature 0 bis 55 °C
- weight of the basic configuration 10.7 kg
- dimensions (W x H x D) 333 x 308 x 166 mm (13.1" x 12.1" x 6.5")
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3: 50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe-x1 slots, 2 PCIe-x4 slot, 1 PCIe-x16 slot and 2 PCI slots
free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable
- graphic adapter integrated inside the Intel® processor, 2 DVI,
and 1 DisplayPort connector.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I,
1 DVI-D and 1 DisplayPort connector. 2 of the 3 connectors are
usable at the same time. The DVI-D connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0020-0080
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0020-0090
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0021-0080
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6501-0021-0090
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0020-0080
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0020-0090
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0021-0080
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6502-0021-0090
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0020-0080
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0020-0090
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0021-0080
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6503-0021-0090
|
Built-in Panel PC
Housing
- 7-slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0…55 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- without keyboard
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6511-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6511-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6511-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6511-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6512-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6512-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6512-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6512-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6513-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6513-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6513-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6513-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- function keys and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6521-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6521-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6521-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6521-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6521-0002-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6521-0002-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6522-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6522-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6522-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6522-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6522-0002-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6522-0002-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6523-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6523-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6523-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6523-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6523-0002-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6523-0002-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- numerical keyboard and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6531-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6531-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6531-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6531-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6531-0002-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6531-0002-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6532-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6532-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6532-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6532-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6532-0002-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6532-0002-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-0002-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-0002-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6533-1001-0080
|
Built-in Panel PC, customer-specific
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- touch pad
- alphanumerical PC keyboard in US layout
and 10 PLC special keys with LED
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
C9900-C560
processor 4th Generation Intel® Core™ i5 4570TE, 2.7 GHz, 2 cores
(TC3:70), instead of Intel® Pentium® G3320TE 2.3 GHz (TC3:50)
C9900-R257
memory extension to 4 GB DDR3L RAM, instead of 2 GB, requires a
64 bit operating system or only 3 GB are addressable
C9900-S441
Microsoft Windows 7 Professional 32 Bit, english
|
Beckhoff Vietnam
|
CP6542-0000-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- alphanumerical PC keyboard in US layout
and 16 special PLC keys with LED on the side
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. The DVI-D connector is occupied
by the display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 2 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6542-0000-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- alphanumerical PC keyboard in US layout
and 16 special PLC keys with LED on the side
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6542-0001-0080
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- alphanumerical PC keyboard in US layout
and 16 special PLC keys with LED on the side
- slide-in labels for PLC special keys
Features
- processor Intel® Pentium® G3320TE 2.3 GHz, 2 cores (TC3:50)
- ATX motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Pentium®
- 2 PCIe x1 slots, 1 PCIe x4 slot, 1 PCIe x16 slot and
3 PCI slots free
- 2 GB DDR3L RAM, expandable to 32 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-I,
1 DVI-D and 1 DisplayPort connector. 2 of the 3 connectors are
usable at the same time. The DVI-D connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0, 2 of these USB ports are led
out, 4 USB 3.0, 2 of these USB ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6542-0001-0090
|
Built-in Panel PC
Housing
- 7 slot ATX housing
- all slots for plug-in cards with a length of up to 190 mm
- drives and plug-in cards easily accessible
- all connectors on the top
- detailed PC configuration information on the housing
- card holders, actuated without tools
- status LEDs and protected reset key
- pull-out clamping levers for fast installation without loose parts
- protection class front side IP 65, rear side IP 20
- operating temperature 0...55 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- alphanumerical PC keyboard in US layout
and 16 special PLC keys with LED on the side
- slide-in labels for PLC special keys
Features
- processor Intel® Celeron® G3900 2.8 GHz, 2 cores (TC3:50)
- ATX motherboard for 6th and 7th Generation Intel® Celeron®, Pentium®
Core™ i3, Core™ i5 or Core™ i7
- 2 PCIe x1 slots, 2 PCIe x4 slot, 1 PCIe x16 slot and
2 PCI slots free
- 4 GB DDR4 RAM, expandable to 64 GB, with a 32 bit operating system
only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 2 DVI
and 1 DisplayPort connector. 1 DVI connector is occupied by the
display in the front.
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- Hard disk, 3½-inch, 1 TB
- 4 serial ports RS232 on-board, 1 of these RS232 ports is led out
with D-sub 9 connector; 10 USB 2.0 on board, not led out;
4 USB 3.0 ports are led out
- PS/2 keyboard socket and PS/2 mouse socket
- 100-240 V AC full range power supply
|
Beckhoff Vietnam
|
CP6701-0000-0020
|
Build-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE, english
|
Beckhoff Vietnam
|
CP6701-0001-0020
|
Built-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6702-0000-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6702-0001-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6702-0011-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6702-0020-0020
|
Built-in Panel PC
- 15-inch TFT display, resolution 1024 x 768
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6702-0021-0020
|
Built-in Panel PC
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6703-0001-0020
|
Built-in Panel PC
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6703-0021-0020
|
Built-in Panel PC
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6709-0000-0020
|
Built-in Panel PC
- 6.5 inch TFT display, resolution 640 x 480
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6709-0001-0020
|
Built-in Panel PC
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6711-0001-0020
|
Built-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6712-0000-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6712-0001-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6719-0000-0020
|
Built-in Panel PC
- 6.5 inch TFT display, resolution 640 x 480
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6719-0001-0020
|
Built-in Panel PC
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6721-0000-0020
|
Built-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6721-0001-0020
|
Built-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6722-0000-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6722-0001-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6722-0002-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6723-0000-0020
|
Built-in Panel PC
- 19-inch TFT display, resolution 1280 x 1024
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6729-0000-0020
|
Built-in Panel PC
- 6.5 inch TFT display, resolution 640 x 480
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6729-0001-0020
|
Built-in Panel PC
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6731-0001-0020
|
Built-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6731-0002-0020
|
Built-in Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch pad
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6732-0000-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6732-0001-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 64 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6732-0002-0020
|
Built-in Panel PC
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit
- 1 RS232 serial port interface in the backplane, D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6733-0001-0020
|
Built-in Panel PC
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6733-0002-0020
|
Built-in Panel PC
- 19-inch TFT display, resolution 1280 x 1024
- touch pad
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB Compact Flash type I, extended temperature range
- 2-port USB 2.0 interface in the the backplane
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 Mbits
- 1 RS232 serial port interface in the backplane, D-sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP6801-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6801-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6801-0011-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6801-0021-0010
|
built-in Control Panel
- 12-inch TFT display, resolution 800 x 600
- touch screen
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6801-1001
|
CP6801-1001-0010 Ts Rv5 Graf
|
Beckhoff Vietnam
|
CP6801-1005-0010 TTS
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6801-1022-0010 Fette
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-0010-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-0011-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-0020-0010
|
Built-in Control Panel
- 15-inch TFT display, resolution 1024 x 768
- 1-portUSB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-0021-0010
|
Built-in Control Panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-1002-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing anodized black, front side IP 65, rear side IP 20
- customized front laminate TTS
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-1006-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Touch screen
- 2 port USB socket inside the Control Panel backplane
- Aluminium housing, front side IP 65, rear side IP 20
- Customized front laminate Eaton Leonard
- Integrated DVI/USB interface
- Connection over 3 connectors for DVI, USB and 24 V
power supply in the Control Panel backplane
- Operating temperature 0 to 55 °C
- Pull-out clamping levers for fast installation
without loose parts
|
Beckhoff Vietnam
|
CP6802-1008-0010 Mewag
|
CP6802-1008 Mewag
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo "MEWAG"
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6802-1016-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- connection via 90° hood IP 20 for DVI, USB and 24 V mounted on
the backplane
|
Beckhoff Vietnam
|
CP6803-0000-0011
|
Built-in Control Panel
- 19 inch TFT display, resolution 1280 x 1024
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
Note! Substitutes the type with the designation CP6803-0000-0010
|
Beckhoff Vietnam
|
CP6803-0001-0011
|
Built-in Control Panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
Note! Substitutes the type with the designation CP6803-0001-0010
|
Beckhoff Vietnam
|
CP6803-0010-0011
|
CP6803-0010-0011 Rv8
|
Beckhoff Vietnam
|
CP6803-0011-0011
|
Build-in Control Panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
Note! Substitutes the type with the designation CP6803-0011-0010
|
Beckhoff Vietnam
|
CP6803-0020-0011
|
Built-in Control Panel
- 19-inch TFT display, resolution 1280 x 1024
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6803-0021-0011
|
Built-in Control Panel
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class front side IP 65, rear side
IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0…55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6809-0000-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6809-0001-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with slide-in logo
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6809-1003 6.5" Rohwedder
|
CP6809-1003-0000 Ts Rv4 Rohwedder
|
Beckhoff Vietnam
|
CP6809-1005-0010 Kalwar
|
Build-in Control Panel CP6809-1005 Kalwar
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- customized front laminate Kalwar
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6811-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6811-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6812-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6812-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6812-1001-0010 Schneider OM
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply
at a connector unit
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
Push-button extension C9900-E755
- Push-button extension on the right side
- 16 push-button keys with signal lamp, type Siemens
Signum square, 30 x 30 mm
- 1 emergency stop key Siemens Signum, directly wireable
- Labels for push-button caps allow individual marking
- Push-button status readable via USB
- Additionaly all push-buttons are directly wireable
with a second normally-open contact via a terminal row
- All signal lamps are transmitted via USB only
|
Beckhoff Vietnam
|
CP6813-0001-0011
|
CP6813-0001-0011 Rv8 Ts
|
Beckhoff Vietnam
|
CP6819-0000-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6819-0001-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6821-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6821-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6821-0002-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6821-1003
|
CP6821-1003-0010 Ts Rv5 Schneider
|
Beckhoff Vietnam
|
CP6821-1004-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touchscreen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- C9900-E705 Push-button extension for CP6821-00xx
- push-button extension on the right side (customer specific)
- 12 push-button keys with signal lamp, type Siemens Signum square
- 1 emergency stop key, type Siemens Signum, directly wireable
- Labels for push-button caps allow individual marking.
- push-button status readable via USB
- Additionally all push-buttons are directly wireable with a second
normally-open contact via a terminal row.
- All signal lamps are transmitted via USB only
- cable gland edgeways in the removable cover
- C9900-M331 Plate to mount a CX1000 behind a built-in Control Panel
|
Beckhoff Vietnam
|
CP6821-1005-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
customised modification:
- keyboard extension in customised assembly referring the guidelines
corresponding with Schneider Optik Maschinen
|
Beckhoff Vietnam
|
CP6822-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6822-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6822-0002-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6823-0001-0011
|
CP6823-0001-0011 Rv8 Ts
|
Beckhoff Vietnam
|
CP6823-0002-0011
|
CP6823-0002-0011 Rv8 Tp
|
Beckhoff Vietnam
|
CP6829-0000-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6829-0001-0000
|
Build-in Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6831-0000-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6831-0001-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6831-0002-0010
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6831-1002-0000
|
Build-in Control Panel
- 12 inch TFT display, resolution 800 x 600
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- customized front laminate with integrated keys and LEDs
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6831-1010-0010
|
Build-in Control Panel CP6831-1010-0010
- 12 inch TFT display, resolution 800 x 600
- touch pad
- 2-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- custom-made dimension: 482,60x354,60x55 mm
- installation dimension: 450x335 mm
|
Beckhoff Vietnam
|
CP6831-1011-0010
|
Build-in Control Panel CP6831-1011-0010
- 12 inch TFT display, resolution 800 x 600
- touch pad
- touch screen
- 2 port USB socket inside the Control Panel backplane
- 2-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
- custom-made dimension: 482,60x354,60x55 mm
- installation dimension: 450x335 mm
|
Beckhoff Vietnam
|
CP6832-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6832-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6832-0002-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6833-0001-0011
|
CP6833-0001-0011 Rv8 Ts
|
Beckhoff Vietnam
|
CP6833-0002-0011
|
CP6833-0002-0011 Rv8 Tp
|
Beckhoff Vietnam
|
CP6842-0000-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout, 16 function keys
- 16 special PLC keys with LED at the sides of the display
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6842-0001-0010
|
Build-in Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touchscreen
- 2 port USB socket inside the Control Panel backplane
- aluminium housing, front side IP 65, rear side IP 20
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout, 16 function keys
- 16 special PLC keys with LED at the sides of the display
- special keys identified by slide-in labels
- integrated DVI/USB interface
- connection over 3 connectors for DVI, USB and 24 V power supply in
the Control Panel backplane
- operating temperature 0 to 55 °C
- pull-out clamping levers for fast installation without loose parts
|
Beckhoff Vietnam
|
CP6842-1000-0010
|
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout 16 function keys
- 16 special PLC keys with LED
- special keys identified by slide-in labels
- integrated DVI/USB interface
supply in the Control Panel backplane
- operating temperature 0 to 55 °C
- 19 pin connector for push buttons at the backside
- USB connector in the front
push button extension with:
- emergency stop
- two push button
- key switch
- 45 laminate button
- two switches ( graycode T=17 and T=23 )
|
Beckhoff Vietnam
|
CP7001-0000-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-0001-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-0010-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-0011-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-1001-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- keyboard socket DIN 5 pin on the front IP 65 with adapter
cable to PS/2
- Serial port DIN 12 pin on the front IP 65 with adapter
cable to d-sub 9 pin
- aluminium housing, protection class IP 65
- Customized front laminate with Beckhoff slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-1015-0010 Däter
|
XCP7001-1015-0010Z Ts Däter
|
Beckhoff Vietnam
|
CP7001-1018 Daetwyler
|
CP7001-1018 Ts Dätwyler
|
Beckhoff Vietnam
|
CP7001-1019 Jagenberg Diana
|
Control Panel CP7001-1019-0000
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with customised slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- Emergency Stop Rafix FS in Control Panel front
- 2x NC
- supply of the emergency stop via 4 pin round
connector within the mounting arm adapter plate,
including assembly.
Enclosed the mating connector
- Mounting arm adapter plate at the Control Panel for
mounting arm system Rolec enclosure coupling part no.
146.010.112, mounting arm from top, wiring through
the mounting arm
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
|
Beckhoff Vietnam
|
CP7001-1020 Loh Engineering
|
CP7001-1020-0010Z Ts Loh Engineering
|
Beckhoff Vietnam
|
CP7001-1030-0010 BWS Systemtechnik
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC cable
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-1043-0010 Mc Kee
|
Control Panel CP70001-1043-0010, Mc Kee
- 12 inch TFT display, resolution 800 x 600
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- mounting arm adapter plate C9900-M114
|
Beckhoff Vietnam
|
CP7001-1057-0010 Meyer & Burger
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7001-1062-0010 Meyer & Burger
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-0000-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-0001-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-0010-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-0011-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-1021-0010
|
CP7002-1021-0010Z Ts Rv6 Ech Will
|
Beckhoff Vietnam
|
CP7002-1027-0010
|
|
Beckhoff Vietnam
|
CP7002-1034 RF
|
Cp7002-1034-tm Sig Combishape
|
Beckhoff Vietnam
|
CP7002-1052 Buhral
|
CP7002-1052-0010X Ts Ial Buhral
|
Beckhoff Vietnam
|
CP7002-1057-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate without slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting Rose mounting arm adapter plate on the backplane
- integrated emgergency stop button, type RAFIX FS with two NC contact
- Keyboard socket in the Control Panel backplane, DIN 5 pin, with
screw-on cap IP 65, with adapter cable from DIN 5 pin to PS/2
|
Beckhoff Vietnam
|
CP7002-1061-0000 Stahel
|
XCP7002-1061-0010X Ts Stahel
|
Beckhoff Vietnam
|
CP7002-1062-0010
|
XCP7002-1062-0010X Ts Stahel
|
Beckhoff Vietnam
|
CP7002-1079-0000 Hermos
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-1094-0010 Mc Kee
|
CP7002-1094-0010 Mc Kee
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- mounting arm adapter plate C9900-M114
|
Beckhoff Vietnam
|
CP7002-1111-0010 Komax
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-1114-0010 Promatec
|
XCP7002-1114-0010Z Ts Rv6 Promatec
|
Beckhoff Vietnam
|
CP7002-1117-0010 Koch
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Touch screen
- Aluminium housing, protection class IP 65, separated parts
- Front laminate with slide-in logo Koch
- Integrated CP-Link interface
- Connection over 2 BNC connectors in the keyboard extension
- Operating temperature 0 to 55 °C
- Keyboard plug IP65 in the front with adapter cable
- serial interface RS232 IP65 in the front with adapter cable
- without keyboard extension
|
Beckhoff Vietnam
|
CP7002-1175-0010
|
Control Panel CP7002-0011-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
C9900-E646 customized push-button extension
- BNC-connection via pigtail in the mounting arm connection
- Mounting arm connection at the push-button
extension from top for mounting arm system Rolec
part no. 146.025.019
|
Beckhoff Vietnam
|
CP7002-1190-0010
|
CP7002-1190-0010Z Ts Rv6 Progress
|
Beckhoff Vietnam
|
CP7002-1248 Ismeca Automation
|
XCP7002-1248-0010X Ts Ismeca automation
|
Beckhoff Vietnam
|
CP7002-1254-0010
|
Control Panel CP7002-1254-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- keyboard socket DIN 5 pin on the front IP 65 with adapter cable to
PS/2
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7002-1272-0010
|
CControl Panel CP7002-1272-0010
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable
from DIN 5 pin to PS/2
- C9900-E130 PS/2 mouse portside in the Control Panel
backplane, DIN 12 pin with screw-on cap IP 65, with
adapter cable from DIN 12 pin to PS/2 socket
- Customised push-button extension
- without cable bushing
- Mounting arm adapter plate at the Control Panel for
mounting arm system Rolec enclosure coupling part no.
146.010.112, mounting arm from bottom, cables installed via
2 BNC connectors in the backplane
- C9900-M400 Toolboard for keyboard or tools, mounted under the
Control Panel
|
Beckhoff Vietnam
|
CP7002-1350-0010
|
|
Beckhoff Vietnam
|
CP7002-1357-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
C9900-E101
keyboard socket in the Control Panel backplane, DIN 5-pin, with
screw-on cap IP 65, with adapter cable from DIN 5-pin to PS/2
C9900-E130
PS/2 mouse interface in the Control Panel backplane, DIN 12-pin, with
screw-on cap IP 65, with adapter cable from DIN 12-pin to PS/2
C9900-F503
customized slide in logo, type BUSA Marquip
C9900-M116
Mounting arm adapter plate at the Control Panel CP70xx with CP-Link
interface for mounting arm system Rolec Tara Plus 149.025.012,
149.025.013, 149.025.014, 149.025.014, 149.035.012, 149.035.013,
mounting arm alternative from top or bottom, cables installed
through the mounting arm
|
Beckhoff Vietnam
|
CP7002-1363-0010
|
Control Panel CP7002-1363-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with customised slide-in logo
C9900-F523
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E641 Customised push-button extension
- without mounting arm connection
- C9900-M931 Cable gland M20 edgeways in the removable cover
|
Beckhoff Vietnam
|
CP7009-0001-0000
|
Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7011-0000-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7011-0001-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7011-1013-0010 TDC
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7012-0000-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7012-0001-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7012-1017-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E651 customized push-button extension
Without mounting arm connection
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable
from DIN 5 pin to PS/2
|
Beckhoff Vietnam
|
CP7012-1018 Tigra
|
CP7012-1018-0010Z Rv6 Tigra
|
Beckhoff Vietnam
|
CP7012-1036-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and customized
slide-in logo C9900-F263
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7012-1043-0010
|
CP7012-1043-0010 Tigra
|
Beckhoff Vietnam
|
CP7012-1044-0010
|
CP7012-1044-0010Z Ts Rv6 Burger
|
Beckhoff Vietnam
|
CP7012-1058-0010
|
CP7012-1058-0010Z Ts Rv6 Erni
|
Beckhoff Vietnam
|
CP7012-1066-0010
|
CP7012-1066-0010 Ts Burger
|
Beckhoff Vietnam
|
CP7012-1220 Bulthaup
|
XCP7012-1220-0010 Ts Bulthaup
|
Beckhoff Vietnam
|
CP7019-0001-0000
|
Control Panel
- 6.5 inch TFT display, resolution 640 x 480
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7020-1001 10"
|
Control Panel
- 10 inch TFT display, resolution 640 x 480
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and Sander Hansen logo
- 10 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
C9900-E105
keyboard socket on the front, DIN 5 pin, with screw-on cap IP 65,
with adapter cable to PS/2 connector
|
Beckhoff Vietnam
|
CP7021-0000-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7021-0001-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7021-0002-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7021-1008
|
CP7021-1008 Tp Abb
|
Beckhoff Vietnam
|
CP7021-1012
|
XCP7021-1012-0010 Ts E602, K7000, M300
|
Beckhoff Vietnam
|
CP7021-1019-0010
|
Control Panel CO7021-1019-0010
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- Customised push-button extension
- mounting arm connection at the push-button extension
alternatively from top or bottom for mounting arm system
Rolec, part no. 146.025.019
|
Beckhoff Vietnam
|
CP7021-1031-PowerAutomation
|
CP7021-1031-0010X ABB
|
Beckhoff Vietnam
|
CP7021-1047-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- CP-Link connection via 2 BNC-cables in the mounting arm
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E606 customized push-button extension
- Mounting arm connection at the push-button extension from top for
mounting arm system Rolec part no. 146.025.011
|
Beckhoff Vietnam
|
CP7021-1062-0010
|
Control Panel CP7021-1062-0010
- 12 inch TFT display, resolution 800 x 600
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and
customised slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by customised slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- Keyboard socket in the Control Panel backplane, DIN 5 pin,
with screw-on cap IP 65, with adapter cable from DIN 5 pin
to PS/2
|
Beckhoff Vietnam
|
CP7021-1076-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- CP-Link connection via 2 BNC-cables in the mounting arm
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E606 Customized Push-button extension
- Mounting arm connection at the push-button extension from top
for mounting arm system Rolec part no. 146.025.019
- KT700-0000 Additional keyboard and touch pad with PS/2 interface
for installation under Control Panel
- C9900-Z150 German layout for the keyboard, instead of US-layout
- C9900-M300 bracket with a fixed 100° angle for installation of the
keyboard
|
Beckhoff Vietnam
|
CP7022-0000-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7022-0001-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7022-0002-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7022-1001-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E105 keyboard socket on the front, DIN 5 pin, with screw-on
cap IP65, with adapter cable to PS/2 connector
|
Beckhoff Vietnam
|
CP7022-1008 ABB
|
CP7022-1008-0010Z Tp ABB
|
Beckhoff Vietnam
|
CP7022-1009 Ciba Vision
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Touch screen
- Aluminium housing, protection class IP 65
- Front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- Numerical key pad, cursor keys
- 10 special PLC keys with LED
- Special keys identified by slide-in labels
- Integrated CP-Link interface
- Connection over 2 BNC connectors in the mounting arm adapter
- Operating temperature 0 to 55 °C
- For mounting 4 M6 x 18 mm threaded holes in the backplane
Integrated option C9900-M310
- Mounting adapter with adjustable 90° to 180° angle for mounting a
keyboard K7000
Integrated option C9900-M114
- Mounting arm adapter plate at the Control Panel CP70xx with CP-Link
interface for mounting arm system Rolec enclosure coupling part no.
146.010.112, mounting arm alternatively from top or bottom, cables
installed through the mounting arm
Customized keyboard extension on the right
- Emergency stop, directly wireable
- Four direct wireable push-button keys, type Siemens
Signum 30 x 30 mm
- 10 optional mountable push-button keys, type Siemens
Signum 30 x 30 mm
- Waiters lock, connected through RS232 interface
Additional keyboard for Control Panel
- Housing in the design of the Control Panel
- Unbreakable keyboard, protection class IP65
- US layout
|
Beckhoff Vietnam
|
CP7022-1022 Opel
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Touch screen
- Aluminium housing, protection class IP 65
- Front laminate with integrated keys, LEDs and
slide-in logo
- 12 function keys, Escape, Enter
- Numerical key pad, cursor keys
- 10 special PLC keys with LED
- Special keys identified by slide-in labels
- Integrated CP-Link interface
- Connection over 2 BNC connectors in the backplane
- Operating temperature 0 to 55 °C
- For mounting 4 M6 x 18 mm threaded holes in the
backplane
Push-button extension for CP7022-1022
- Push-button extension on the right side
- 3 key switches type Siemens Sigum square, 30 x 30 mm
- 8 push-button keys with signal lamp, type Siemens
Signum square, 30 x 30 mm
- 1 cover type Siemens Signum square, 30 x 30 mm
- 1 emergency stop key Siemens Signum, directly
wireable
- Drafts for labels for push-button caps from Opel
- Without mounting arm connection
C9900-E101
- Keyboard socket in the Control Panel backplane, DIN
5 pin, with screw-on cap IP 65, with adapter cable
from DIN 5 pin to PS/2
|
Beckhoff Vietnam
|
CP7022-1050-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
C9900-E101
Keyboard socket in the Control Panel backplane, DIN
5 pin, with screw-on cap IP 65, with adapter cable
from DIN 5 pin to PS/2
C9900-E662
Push-button extension for CP7022-00xx
- Push-button extension on the right side
- 14 push-button keys with signal lamp, type Siemens
Signum square, 30 x 30 mm
- 1 emergency stop key Siemens Signum, directly
wireable
- Labels for push-button caps allow individual marking
- Push-button status readable via CP-Link
- Additionaly all push-buttons are directly wireable
with a second normally-open contact via a terminal
row
- All signal lamps are transmitted via CP-Link only
- Mounting arm connection at the push-button
extension from top for mounting arm system Rolec
part no. 146.025.011
- Customized assembly
|
Beckhoff Vietnam
|
CP7022-1075-0010
|
Control Panel CP7022-1075
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- operating temperature 0 to 55 °C
- C9900-M136 inclination coupling Rose 49.498000,
without mounting adapter plate
- C9900-T900 touch screen pen with holder
|
Beckhoff Vietnam
|
CP7029-1008-0000
|
CP7029-1008 Prometall
- 6.5 inch TFT display, resolution 640 x 480
- glas
- aluminium housing, protection class IP 65
- front laminate with integrated keys and LEDs
- C9900-F395 customised slide-in logo type Prometall
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys identified by customised slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the adapterplate
- operating temperature 0 to 55 °C
- customized mounting arm adapterplate
- adapterplate for HBA
- customized push button extension
|
Beckhoff Vietnam
|
CP7031-0000-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7031-0001-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7031-0002-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7031-1003 Heidenhain Modular 2
|
CP7031-1003-0010X Heidenhain
|
Beckhoff Vietnam
|
CP7031-1025 Balsfulland
|
Control Panel CP7031-1025
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminum housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- CP-Link connection via 2 BNC-cables in the mounting arm
- operating temperature 0 to 55 °C
- handle on the bottom side of the Control Panel
Push-button extension with customer specific arrangement
- mounting arm connection at the top of the push-button extension
for mounting arm system Rolec Part No. 146.025.019
C9900-T900
touch screen pen with holder
mounted at the Control Panel
C9900-F293
Customer specific slide-in logo grey, instead of Beckhoff logo
|
Beckhoff Vietnam
|
CP7031-1027 IMA Amberg
|
CP7031-1027-0010Z Tp Rv5 Feintool
|
Beckhoff Vietnam
|
CP7031-1036 IMA
|
CP7031-1036-0010X Ts Ima Finetool
|
Beckhoff Vietnam
|
CP7031-1046 GFA Elze
|
XCP7031-1046-0010X Gfa Elze
|
Beckhoff Vietnam
|
CP7031-1053-0010 Lambda
|
CP7031-1053 Customer: Lamdba
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
Push-button extension for CP7031-0000
- Push-button extension on the right side
- 16 push-button keys with signal lamp, type Siemens
Signum square, 30 x 30 mm
- 1 emergency stop key Siemens Signum, directly
wireable
- Labels for push-button caps allow individual marking
- Push-button status readable via CP-Link
- Additionaly all push-buttons are directly wireable
with a second normally-open contact via a terminal
row
- All signal lamps are transmitted via CP-Link only
- Mounting arm connection for mounting arm system
Rolec part no. 146.025.019 at the push-button
extension alternatively from top or bottom. Cover
and mounting arm adapter behind the push-button
extension can be turned around 180°.
|
Beckhoff Vietnam
|
CP7031-1061-0010
|
CP7031-1061-0010X Tp Rv5 GoodYear
|
Beckhoff Vietnam
|
CP7031-1062 Nobilia
|
CP7031-1062-0010X TS Nobilia
|
Beckhoff Vietnam
|
CP7031-1068-0010
|
Control Panel CP7031-1068-0010
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the mounting arm adapter plate
- operating temperature 0 to 55 °C
- C9900-E611 Customised push-button extension
- without mounting arm connection
- without cable bushing
- C9900-M116 Mounting arm adapter plate at the Control Panel
for mounting arm system Rolec Tara Plus part no.149.025.012,
149.025.013, 149.025.014, 149.035.012, 149.035.013,
mounting arm from top or bottom, wiring through the
mounting arm
- C9900-M400 Toolboard for keyboard or tools, mounted under
the Control Panel
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E130 PS/2 mouse portside in the Control Panel
backplane, DIN 12 pin with screw-on cap IP 65, with adapter
cable from DIN 12 pin to PS/2 socket
|
Beckhoff Vietnam
|
CP7031-1078-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch pad with PS/2 mouse portside in the Control Panel
backplane
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-F001 Customized label of the PLC special keys,
preassembled slide-in label in black and white
- C9900-E611 customized push-button extension
without mounting arm connection
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from DIN 5
pin to PS/2
- C9900-E120 Serial port in the Control Panel backplane, DIN 12 pin,
with screw-on cap IP 65, with adapter cable from DIN 12 pin to d-sub
9 pin
|
Beckhoff Vietnam
|
CP7031-1107-0010
|
CP7031-1107 Customer: Lamdba
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
Push-button extension
- Mounting arm connection for mounting arm system
Rolec part no. 146.025.019 at the push-button
extension alternatively from top or bottom. Cover
and mounting arm adapter behind the push-button
extension can be turned around 180°
|
Beckhoff Vietnam
|
CP7031-1119-0010
|
Control Panel CP7031-1119-0010
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-M136 Inclination coupling Rose 49.498000
|
Beckhoff Vietnam
|
CP7031-1120
|
CP7031-1120-0010Z Ts Rv5 Leybold
|
Beckhoff Vietnam
|
CP7031-1124-0010
|
Control Panel CP7031-1124-0000
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable
from DIN 5 pin to PS/2
- C9900-E130 PS/2 mouse portside in the Control Panel backplane,
DIN 12 pin with screw-on cap IP 65, with adapter cable from
DIN 12 pin to PS/2 socket
- C9900-M400 Toolboard for keyboard or tools, mounted under the
Control Panel
- C9900-M116 Mounting arm adapter plate at the Control Panel for
mounting arm system Rolec Tara Plus part no. 149.025.012,
149.025.013, 149.025.014, 149.035.012, 149.035.013, mounting
arm from top or bottom, wiring through the mounting arm
- Customised push-button extension
- without cable bushing
- C9900-M931 screwed cable gland, designed for feeding the
signal line into the push-button extension
|
Beckhoff Vietnam
|
CP7031-1126-0010
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- customised push-button extension
|
Beckhoff Vietnam
|
CP7032-0000-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7032-0001-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7032-0002-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7032-0047-0000 Lederhilger
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7032-1005-0010
|
CP7032-1005-0010Z Ts/Tp Rv6
|
Beckhoff Vietnam
|
CP7032-1007 Capito & Assenmacher
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Heated glass supplied by a regulated power supply with 5V-25V DC
(4 pin M12 connector in the backplate)
- Touch pad
- Aluminium housing, protection class IP 65
- Front laminate with German keyboard layout and slide-in logo
- Note: special keys without function
- Integrated CP-Link interface
- Connection over 2 BNC connectors in the backplane
- Operating temperature 0 to 55 °C
- For mounting 4 M6 x 18 mm threaded holes in the
backplane
|
Beckhoff Vietnam
|
CP7032-1012 Döhler
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Touch screen
- Aluminium housing, protection class IP 65
- Front laminate with integrated keys, LEDs and
slide-in logo
- Alphanumeric PC keyboard in US layout
- 10 special PLC keys with LED
- Special keys identified by slide-in labels
- Integrated CP-Link interface
- Connection over 2 BNC connectors in the backplane
- Operating temperature 0 to 55 °C
- For mounting 4 M6 x 18 mm threaded holes in the
backplane
Customized:
- Front foil with Döhler layou
|
Beckhoff Vietnam
|
CP7032-1024
|
CP7032-1024-0010 Tp Rv2 IGH Krüger, #Basis
|
Beckhoff Vietnam
|
CP7032-1026 Nexans
|
CP7032-1026-0010X Ts Rv2 Nexans
|
Beckhoff Vietnam
|
CP7032-1027
|
CP7032-1027-0010 Ts Rv6 Applied Films
|
Beckhoff Vietnam
|
CP7032-1032 Gelenkwellenwerk
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- Touch screen
- Aluminium housing, protection class IP 65
- Front laminate with integrated keys, LEDs and slide-in logo
- Alphanumeric PC keyboard in US layout
- 10 special PLC keys with LED
- Special keys identified by slide-in labels
- Integrated CP-Link interface
- Connection over 2 BNC connectors in the backplane
- Operating temperature 0 to 55 °C
- For mounting 4 M6 x 18 mm threaded holes in the
backplane
Push-button extension for CP7032-00xx
- Push-button extension on the right side
- 18 push-button keys with signal lamp, type Siemens Signum square,
30 x 30 mm
- Customized assembly according to drawings of the customer
- 1 emergency stop key Siemens Signum, directly wireable
- Labels for push-button caps allow individual marking
- Mounting arm connection at the push-button extension from top for
mounting arm system Rolec
part no. 146.025.019
|
Beckhoff Vietnam
|
CP7032-1061-0010 Collmann
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
|
Beckhoff Vietnam
|
CP7032-1070-0010
|
CP7032-1070-0010 TS Nexans
|
Beckhoff Vietnam
|
CP7032-1071-0010 Synchropress
|
CP7032-1071-0010Z Ts Rv6 Hieger (Hülshorst)
|
Beckhoff Vietnam
|
CP7032-1073 Ehrt
|
CP7032-1073-0010X TP Ehrt
|
Beckhoff Vietnam
|
CP7032-1074-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E678 customized push-button extension
- Mounting arm connection for mounting arm system Rolec
part no. 146.025.019 at the push-button extension alternatively
from top or bottom. Cover and mounting arm adapter behind the
push-button extension can be turned around 180°.
- C9900-F002 German and English label of the push-button in the
push-button extension
- C9900-E101 Keyboard socket in the Control Panel backplane, DIN 5
pin, with screw-on cap IP 65, with adapter cable from DIN 5 pin to
PS/2
- C9900-E130 PS/2 mouse portside in the Control Panel backplane,
DIN 12 pin with screw-on cap IP 65, with adapter cable from DIN 12
pin to PS/2 socket
- C9900-M400 Toolboard for keyboard or tools, mounted under the
Control Panel
|
Beckhoff Vietnam
|
CP7032-1081-0010 IMA
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touchscreen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors IP65 in the Control Panel backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
C9900-E671
- Push-button extension in customized assembly
- Without mounting arm connection
- With metrical M25 connector in the side of the push-button cover
|
Beckhoff Vietnam
|
CP7032-1082-0010 Leybold
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo Leybold
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- C9900-M120 mounting arm adapter
|
Beckhoff Vietnam
|
CP7032-1109-0010
|
CP7032-1064-0010 Umicore
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors
- operating temperature 0 to 55 °C
Options:
- C9900-E101
- C9900-E130
- C9900-M400
- C9900-E678, Mounting arm connection from top or bottom
|
Beckhoff Vietnam
|
CP7032-1133-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E120 Serial port in the Control Panel backplane, DIN 12
pin, with screw-on cap IP 65, with adapter cable from DIN 12
pin to d-sub 9 pin
- C9900-M112 Mounting arm adapter plate at the Control Panel
with CP-Link interface for mounting arm system Rolec enclosure
coupling part no. 146.010.112, mounting arm from bottom,
wiring through the mounting arm
- C9900-E671 Customised push-button extension
type Koch 2
- Without mounting arm connection
- C9900-M931 Cable gland M20 edgeways in the removable cover
|
Beckhoff Vietnam
|
CP7032-1153-0010
|
Control Panel CP7032-1153-0010
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors IP65 in the Control Panel backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
C9900-E671
- Push-button extension in customized assembly
- Without mounting arm connection
- With metrical M25 connector in the side of the push-button cover
|
Beckhoff Vietnam
|
CP7032-1160-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- operating temperature 0 to 55 °C
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E120 Serial port in the Control Panel backplane,
screw-on cap IP 65, with adapter cable from DIN 12 pin to
to d-sub 9 pin
- C9900-M116 Mounting arm adapter plate at the Control Panel with
CP-Link interface for mounting arm system Rolec Tara Plus part no.
149.025.012, 149.025.013, 149.025.014, 149.035.012, 149.035.013,
mounting arm from top or bottom, wiring through the mounting arm
- C9900-M400 Toolboard for keyboard or tools, mounted under the
Control Panel
- C9900-E671 Customized push-button extension
- Without mounting arm connection
|
Beckhoff Vietnam
|
CP7032-1183-0010
|
Control Panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E671 Customised push-button extension
- Without mounting arm connection
- C9900-M112 Mounting arm adapter plate at the Control Panel
with CP-Link interface for mounting arm system Rolec enclosure
coupling part no. 146.010.112, mounting arm from bottom,
wiring through the mounting arm
|
Beckhoff Vietnam
|
CP7032-1189-0010
|
Control Panel CP7032-1189-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- C9900-E671 Customised push-button extension
- without mounting arm connection
- C9900-M931 Cable gland M20 edgeways in the removable cover
- labelling of the push-button extension
|
Beckhoff Vietnam
|
CP7032-1193-0010
|
Control Panel CP7032-1193-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the mounting arm adapter
plate
- operating temperature 0 to 55 °C
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-E130 PS/2 mouse portside in the Control Panel backplane,
DIN 12 pin with screw-on cap IP 65, with adapter cable from
DIN 12 pin to PS/2 socket
- C9900-M400 Toolboard for keyboard or tools, mounted under the
Control Panel
- Customsied push-button extension
- mounting arm connection at the Control Panel backplane
alternatively from top or bottom for mounting arm system Rolec
Tara Plus, part no. 149.025.012, 149.025.013, 149.025.014,
149.035.012, 149.035.013 or 149.035.015
|
Beckhoff Vietnam
|
CP7032-1196-0010
|
Control Panel CP7032-1196-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the mounting arm adapter
plate
- operating temperature 0 to 55 °C
- C9900-E678 Push-button extension Standard
- mounting arm connection at the Control Panel backplane
alternatively from top or bottom for mounting arm system Rolec
Tara Plus, part no. 149.025.012, 149.025.013, 149.025.014,
149.035.012, 149.035.013 or 149.035.015
- Supply of the push-button extension via 19 pin round
connector within the mounting arm adapter plate, without
assembly. Enclosed the mating connector with contacts
|
Beckhoff Vietnam
|
CP7032-1224-0010
|
Control Panel CP7032-1224-0010
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- aluminium housing, protection class IP 65
- front laminate with integrated keys, LEDs and slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys identified by slide-in labels
- integrated CP-Link interface
- connection over 2 BNC connectors in the mounting arm
adapter plate
- operating temperature 0 to 55 °C
- C9900-E101 Keyboard socket in the Control Panel backplane,
DIN 5 pin, with screw-on cap IP 65, with adapter cable from
DIN 5 pin to PS/2
- C9900-M116 Mounting arm adapter plate at the Control Panel
interface for mounting arm system Rolec Tara Plus part no.
149.025.012, 149.025.013, 149.025.014, 149.035.012, 149.035.013,
mounting arm from top or bottom, wiring through the mounting arm
- C9900-M400 Toolboard for keyboard or tools, mounted under the
Control Panel
- C9900-E671 Customised push-button extension
- without mounting arm connection
- C9900-M931 cable gland M20
|
Beckhoff Vietnam
|
CP7201-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- without keyboard
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0020-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0020-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0021-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-0021-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 12-inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7201-1015-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Customised front-foil, type "IWK"
- C9900-R258 memory extension to 8 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
- C9900-E169 2 port USB socket inside the backplane, DIN 8 pin with screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- 2x C9900-E186 IP 65 connector M12 in the wiring area for one
serial interface RS232
- C9900-E190 USB-A in the wiring area for one USB 2.0 Port,
including covering cap IP 65
- C9900-S479 Microsoft Windows 10 IoT Enterprise, Long Term
Servicing Branch (LTSB), 64 bit, English, for industrial PCs
with Intel® Celeron® Pentium®, Core™ i3 or Core™ i5 from the 4th
generation
|
Beckhoff Vietnam
|
CP7201-1016-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- Customised front-foil, type "IWK"
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead of 2½-inch hard disk
- C9900-R258 memory extension to 8 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system
- C9900-E169 2 port USB socket inside the backplane, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- C9900-E185 IP 65 connector in the wiring area for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- 2x C9900-E186 IP 65 connector M12 in the wiring area for one
serial interface RS232
- C9900-E190 USB-A in the wiring area for one USB 2.0 Port,
including covering cap IP 65
- Customised push-button extension
- 1 push-button keys with signal lamp, type Siemens Signum, round
- 2 push-button keys, type Siemens Signum, round
- 1 emergency stop key, type Siemens Signum
- all contacts and LED are directly wireable
- Supply of the push-button extension via 16 pole connector
Phoenix within the push-button extension, including assembly.
Enclosed the mating connector
- C9900-S479 Microsoft Windows 10 IoT Enterprise, Long Term Servicing
Branch(LTSB), 64 bit, English, for industrial PCs with Intel®
Celeron®, Pentium®, Core™ i3 or Core™ i5 from the 4th generation
|
Beckhoff Vietnam
|
CP7202-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- without keyboard
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0020-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0020-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0021-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-0021-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7202-1072-0060
|
„Economy“ Panel PC, type G.D.
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
C9900-C608
processor 6th generation Intel® Core™ i3-6100TE, 2.7 GHz,
2 cores (TC3:60), instead of Intel® Celeron® G3900TE 2.3 GHz (TC3:50)
C9900-E185
IP 65 connector in the wiring area of a CP32xx, CP37xx or CP72xx for
the second on board Ethernet adapter, Harting push-pull Ethernet
socket
C9900-F293
Customer specific slide-in logo grey, instead of Beckhoff logo
C9900-H552
16 GB CFast card, SLC flash, extended temperature range
C9900-H742
solid-state disk SSD, 3D flash, 2½-inch, 120 GB,
instead of 2½-inch hard disk
C9900-M163
rotatable and tiltable mounting arm adapter for Panel PC CP72xx, for
Rittal and Rolec mounting arm systems with 48 mm tube from bottom,
instead of rotatable mounting arm adapter
C9900-S408
Image installed on the solid state disk
C9900-S419
Microsoft Windows Embedded Standard 7, 32 Bit, multilingual, English
and German, more languages can be installed, multi finger touch screen
support
C9900-U209
uninterruptible power supply UPS, integrated into the 24 V power
supply, without battery, occupies one internal serial interface
C9900-Z435
single packaging for every device of a delivery. price per device.
TX1250-0005
License for usage of TC2 NC PTP
License for one CPU. The Beckhoff software license agreements
are valid.
|
Beckhoff Vietnam
|
CP7202-1073-0050
|
"Economy" Panel PC CP7202-1073-0050
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 15-inch TFT display, resolution 1024 x 768
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-F093 Customer specific slide-in logo for display sizes 10
to 19 inch, type Xuchang Tobacco, instead of Beckhoff logo
- C9900-E185 IP-65 - Steckverbinder im Anschlussraum für den
zweiten On-Board-Ethernet-Adapter, Harting-Push-Pull-Ethernet-
Buchse
- C9900-M162 rotatable and tiltable mounting arm adapter for
Panel PC, for Rittal and Rolec mounting arm systems with 48 mm
tube from top, instead of rotatable mounting arm adapter
- C9900-S441 Microsoft Windows 7 Professional 32 bit, English
- C9900-U209 uninterruptible power supply UPS, integrated into
the 24 V power supply, without battery, occupies one internal
serial interface
|
Beckhoff Vietnam
|
CP7203-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- without keyboard
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- without keyboard
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- without keyboard
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0020-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0020-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0021-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7203-0021-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0…45 °C
Front panel
- 19-inch TFT display, resolution 1280 x 1024
- touch screen
- without keyboard
- 1-port USB-A socket in the front with screw-on cap IP 65
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7211-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7211-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7211-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7211-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7212-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7212-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7212-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7212-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7213-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7213-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7213-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7213-0001-0060
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7221-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7221-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7221-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7221-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7221-0002-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7221-0002-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-0002-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-0002-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7222-1010-0050
|
"Economy" Panel PC CP7222-1010-0050
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-E169 2 port USB socket inside the Control Panel backplane,
DIN 8 pin with screw-on cap IP 65 with adapter cable from
DIN 8 pin to 2 x USB
- C9900-E215 1 port USB socket inside the Control Panel backplane,
USB-A socket with screw-on cap IP 65
- C9900-E185 IP 65 connector in the wiring area of a for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- Customised push-button extension
- circular plug-in connector between push-button extension and
connection section
- Toolboard for keyboard or tools, with area for mouse, can be
mounted under the Panel PC
- C9900-C571 processor Intel® Core™ i5-4410E, 2.9 GHz, 2 cores
(TC3: 70), instead of Intel® Celeron 2000E 2.2 GHz (TC3: 50)
- C9900-R257 memory extension to 4 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system or only 3 GB are addressable
|
Beckhoff Vietnam
|
CP7222-1013-0050
|
"Economy" Panel PC CP7222-1013-0050
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-E169 2 port USB socket inside the Control Panel backplane,
DIN 8 pin with screw-on cap IP 65 with adapter cable from
DIN 8 pin to 2 x USB
- C9900-E215 1 port USB socket inside the Control Panel backplane,
USB-A socket with screw-on cap IP 65
- C9900-E185 IP 65 connector in the wiring area of a for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- Customised push-button extension
- circular plug-in connector between push-button extension and
connection section
- Toolboard for keyboard or tools, with area for mouse, can be
mounted under the Panel PC
|
Beckhoff Vietnam
|
CP7222-1014-0050
|
"Economy" Panel PC CP7222-1014-0050
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-E169 2 port USB socket inside the Control Panel backplane,
DIN 8 pin with screw-on cap IP 65 with adapter cable from
DIN 8 pin to 2 x USB
- C9900-E215 1 port USB socket inside the Control Panel backplane,
USB-A socket with screw-on cap IP 65
- C9900-E185 IP 65 connector in the wiring area of a for the second on
board Ethernet adapter, Harting push-pull Ethernet socket
- Customised push-button extension
- circular plug-in connector between push-button extension and
connection section
- Toolboard for keyboard or tools, with area for mouse, can be
mounted under the Panel PC
- C9900-C564 processor 4th Generation Intel® Core™ i7 4700EQ, 2.4 GHz,
4 cores, instead of Intel® Celeron® 2000E 2.2 GHz
- C9900-R259 memory extension to 16 GB DDR3L RAM, instead of 2 GB,
requires a 64 bit operating system
- FC9151-0010 Ethernet PC network card 10/100/1000 MBit/s, 1 channel,
Mini PCI interface, including IP 65 built-in Harting push-pull
Ethernet socket in the wiring area
- C9900-H746 solid-state disk SSD, 3D flash, 2½-inch, 480 GB,
instead of 2½-inch hard disk
|
Beckhoff Vietnam
|
CP7223-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7223-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7223-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7223-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7223-0002-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7223-0002-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- 12 function keys, Escape, Enter
- numerical key pad, cursor keys
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7231-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7231-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7231-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7231-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7231-0002-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7231-0002-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 12 inch TFT display, resolution 800 x 600
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-0002-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-0002-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7232-1009-0060
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 6th and 7th Generation Intel® Core™ i3,
Core™ i5, Core™ i7, Celeron® or Pentium®
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
- C9900-C610 processor 6th generation Intel® Core™ i7-6700TE, 2.4 GHz,
4 cores (TC3:80), instead of Intel® Celeron® G3900TE 2.3 GHz
(TC3:50)
- C9900-D191 2 slots for 2½-inch hard disks or SSDs, instead of 1
slot for a hard disk or SSD and 1 slot for CFast
- C9900-E169 2 port USB socket inside the Control Panel or Panel PC
backplane, DIN 8 pin with screw-on cap IP 65 with adapter cable
from DIN 8 pin to 2 x USB, inside a Panel PC backplane only 2 USB
ports are possible.
- C9900-E185 IP 65 connector in the wiring area of a CP72xx for
the second on board Ethernet adapter, Harting push-pull
Ethernet socket
- C9900-H750 solid-state disk SSD, 3D flash, 2½-inch, 240 GB, instead
of 2½-inch hard disk
- C9900-U209 uninterruptible power supply UPS, integrated into the 24
V power supply, without battery, occupies one internal serial
interface
- C9900-M401 Mounting holes for one toolboard for keyboard or tools
at the bottom side of a Control Panel CP7xxx. The Control Panel
will be delivered without toolboard
- C9900-M163 rotatable and tiltable mounting arm adapter for Panel PC
CP72xx, for Rittal and Rolec mounting arm systems with 48 mm tube
from bottom, instead of rotatable mounting arm adapter
- C9900-R270 Memory extension to 8 GB DDR4 RAM, instead of 4 GB, requires a
64 bit operating system.
|
Beckhoff Vietnam
|
CP7233-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7233-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7233-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7233-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7233-0002-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7233-0002-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 19 inch TFT display, resolution 1280 x 1024
- touch pad
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 10 special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7242-0000-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 16 lateral special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T-connector,
one of these is led out in the wiring area
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7242-0000-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 16 lateral special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7242-0001-0050
|
"Economy" Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 16 lateral special PLC keys with LED
- special keys Identified by Slide-in labels
Features
- processor Intel® Celeron® 2000E 2.2 GHz, 2 cores (TC3:50)
- 3½-inch motherboard for 4th Generation Intel® Core™ i3, Core™ i5,
Core™ i7 or Intel® Celeron®
- 1 Mini PCI slot free for cards installed ex factory
- 2 GB DDR3L RAM, expandable ex factory to 16 GB
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front and 1 DVI-I connector free
- on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector
- on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7242-0001-0060
|
„Economy“ Panel PC
Housing
- Industrial PC with Control Panel for mounting arm installation
- rotatable mounting arm adapter for Rittal and Rolec mounting arm
systems with 48 mm tube from top
- wiring area for up to 6 IP 65 connectors
- 1 slot for one 2½-inch hard disk or SSD and 1 slot for one
CFast card
- lithium battery of the system clock, changeable from outside
- passive cooling through heat sink structure between Control Panel
and add-on PC, internal fan for equal heat distribution to all the
walls of the housing
- 20 cm free space required around the PC for air circulation
- protection class IP 65
- operating temperature 0...45 °C
Front panel
- 15 inch TFT display, resolution 1024 x 768
- touch screen
- front laminate with integrated keys, LEDs and Slide-in logo
- alphanumerical PC keyboard in US layout
- 16 lateral special PLC keys with LED
- special keys Identified by Slide-in labels
Features
– processor Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC3:50)
– 3½-inch motherboard for 6th and 7th generation Intel® Celeron®,
Pentium®, Core™ i3, Core™ i5 or Core™ i7
- 4 GB DDR4 RAM, expandable ex factory to 32 GB, with a 32 bit
operating system only 3 GB are addressable.
- graphic adapter integrated inside the Intel® processor, 1 DVI-D port
occupied by the display in the front
– on-board dual Ethernet adapter with 2 x 100/1000BASE-T connector,
one Ethernet port led out ex factory
– on-board SATA RAID 1 controller, Intel® Rapid Storage Technology
- hard disk, 2½-inch, 320 GB
- M23 built-in socket for power supply and 1 Harting push-pull
Ethernet built-in socket 100/1000BASE-T in the wiring area
- 24 V DC power supply
|
Beckhoff Vietnam
|
CP7700-1004-0030
|
Panel PC CP7700-1004-0030
- 10-inch display, resolution 800 x 600
- integrated 5 wire touch screen
- aluminum housing, black anodized
- front aluminum plate, black anodized
- cover on the back side
- protection class front side IP 54, rear side IP 20
- adaptation for counting machine arm included
- processor Intel® Atom™ Z530 1,6 GHz
- 1 GB on-board RAM
- 2 RJ 45 Ethernet connectors in the backplane, 10/100/1000 Mbits
- 8 GB Compact-Flash with extended temperature range
- 2 USB 2.0 ports
- 24 V power supply
- lithium battery of the system clock, accessible from the rear side
- all connectors at the bottom of the rear side
- operating temperature 0…45 °C
- dimensions (W x H x D) 274 x 222 x 43,5 mm
- customised housing imprint "PJD"
- internal, capacitive 1-second UPS
- Windows Embedded Standard 7 [P], 32 Bit, with one license for one
pc, mulitlingual
|
Beckhoff Vietnam
|
CP7700-1005-0030
|
Panel PC CP7700-1005-0030
- 10-inch display, resolution 800 x 600
- integrated 5 wire touch screen
- aluminum housing, black anodized
- front aluminum plate, black anodized
- cover on the back side
- protection class front side IP 54, rear side IP 20
- adaptation for counting machine arm included
- processor Intel® Atom™ Z530 1,6 GHz
- 1 GB on-board RAM
- 2 RJ 45 Ethernet connectors in the backplane, 10/100/1000 Mbits
- 8 GB Compact-Flash with extended temperature range
- 2 USB 2.0 ports
- 24 V power supply
- lithium battery of the system clock, accessible from the rear side
- all connectors at the bottom of the rear side
- operating temperature 0…45 °C
- dimensions (W x H x D) 274 x 222 x 43,5 mm
- customised housing imprint "PJD"
- internal, capacitive 1-second UPS
- Windows Embedded Standard 7 [P], 32 Bit, with one license for one
pc, mulitlingual
- RS422 port led out with 9-pin D-sub connector
|
Beckhoff Vietnam
|
CP7701-0000-0020
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 threaded holes M6 x 18 mm in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0000-0030
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Atom™ Z510 1,1 GHz, 1 GB DDR2RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0000-0040
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Celeron™ ULV 827E 1.4 GHz (TC3:50),
2 GB DDR3-RAM
- 20 GB CFast card, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 45 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- Microsoft Windows Embedded Compact 7, english
|
Beckhoff Vietnam
|
CP7701-0001-0020
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 threaded holes M6 x 18 mm in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0001-0030
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Atom™ Z510 1,1 GHz, 1 GB DDR2RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0001-0040
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Celeron™ ULV 827E 1.4 GHz (TC3:50),
2 GB DDR3-RAM
- 20 GB CFast card, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 45 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- Microsoft Windows Embedded Compact 7, english
|
Beckhoff Vietnam
|
CP7701-0011-0020
|
Control Panel
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 2 port USB socket inside the Control Panel front, DIN 8 pin with
screw-on cap IP 65 with adapter cable from DIN 8 pin to 2 x USB
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit, IP65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0020-0040
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Celeron™ ULV 827E 1.4 GHz (TC3:50),
2 GB DDR3-RAM
- 20 GB CFast card, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 45 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- Microsoft Windows Embedded Compact 7, english
|
Beckhoff Vietnam
|
CP7701-0021-0020
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 threaded holes M6 x 18 mm in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0021-0030
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Atom™ Z510 1,1 GHz, 1 GB DDR2RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- operating system Microsoft Windows CE 6, english
|
Beckhoff Vietnam
|
CP7701-0021-0040
|
Panel PC
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Celeron™ ULV 827E 1.4 GHz (TC3:50),
2 GB DDR3-RAM
- 20 GB CFast card, extended temperature range
- 2 RJ 45 Ethernet connectors in the backplane,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP 65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 45 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- Microsoft Windows Embedded Compact 7, english
|
Beckhoff Vietnam
|
CP7701-1063-0020
|
Control Panel CP7701-1063-0020
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, AMD LX800 processor 500 MHz, 256 MB DDR-RAM
- 64 MB compact flash type I, extended temperature range
- 32 kByte NOVRAM for fail-safe storage of process data
- 2 RJ 45 Ethernet connectors in the backplane, 10/100 MBit, IP65
- 1 RS232 serial port interface in the backplane, DIN 12-pin IP65,
with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the backplane
- operating temperature 0 to 55 °C
- for mounting 4 M6 x 18 mm threaded holes in the backplane
- operating system Microsoft Windows CE, english
- Customised Push-button extension
- mounting arm connection at the Control Panel backplane
alternatively from top or bottom for mounting arm system Rolec
Tara Plus, part no. 149.025.012, 149.025.013, 149.025.014,
149.035.012, 149.035.013 or 149.035.015
- without RS232 serial port interface in the mounting arm adapter
|
Beckhoff Vietnam
|
CP7701-1063-0030
|
Panel PC CP7701-1063-0030
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 1-port USB-A socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Atom™ 1,1 GHz, 1 GB DDR2RAM
- 64 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the mounting arm adapter plate,
10/100/1000 MBit, IP 65
- 24 V power supply, connector in the mounting arm adapter plate
- operating temperature 0 to 55 °C
- operating system Microsoft Windows CE, english
- Customised Push-button extension
- mounting arm connection at the Control Panel backplane
alternatively from top or bottom for mounting arm system Rolec
Tara Plus, part no. 149.025.012, 149.025.013, 149.025.014,
149.035.012, 149.035.013 or 149.035.015
- without RS232 serial port interface in the mounting arm adapter
|
Beckhoff Vietnam
|
CP7701-1063-0040
|
Panel PC CP7701-1063-0040
- 12 inch TFT display, resolution 800 x 600
- touch screen
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Celeron™ ULV 827E 1.4 GHz (TC3:50),
2 GB DDR3-RAM
- 4 GB CFast card, extended temperature range
- 2 RJ 45 Ethernet connectors in the adapter,
10/100/1000 MBit, IP 65
- 24 V power supply, connector in the adapter
- operating temperature 0 to 45 °C
- Microsoft Windows Embedded Compact 7, English
- Customised Push-button extension
- mounting arm connection at the Control Panel backplane
alternatively from top or bottom for mounting arm system Rolec
Tara Plus, part no. 149.025.012, 149.025.013, 149.025.014,
149.035.012, 149.035.013 or 149.035.015
- without RS232 serial port interface in the mounting arm adapter
|
Beckhoff Vietnam
|
CP7701-1066-0030 Multivac
|
Panel-PC CP7701-1066-0030 Multivac
- 12 inch TFT display, resolution 800 x 600
- flush mounted touch screen
- stainless steel housing 1.4301
- stainless steel backplane 1.4301
- protection class front and rear side IP 65
- customised front laminate
- emergency stop in the front, 2 NCs supplied via 7 pin connector in
the plug bezel
- 2 RAFI push-buttons RF19 behind the front foil, each with 1 NO
and white LED
- 1-port USB-A interface in the front with screw cap (stainless
steel 1.4301) IP 65
- integrated PC, processor Intel® Atom™ 1,6 GHz, 1 GB DDR2RAM
- internal, capacitive 1-second UPS to ensure secure backup of
persistent application data on the Compact Flash card
- 2 GB Compact Flash card type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the plug bezel,
10/100/1000 MBit, IP 65
- 2 USB-2.0-Ports in the plug bezel
- operating system Microsoft Windows CE, english
- Twin Cat NC PTP license
|
Beckhoff Vietnam
|
CP7701-1091-0030
|
Panel PC CP7701-1091-0030
- 12 inch TFT display, resolution 800 x 600
- touch screen
- 1-port-USB-A-socket in the front with screw-on cap IP 65
- aluminium housing, protection class IP 65
- front laminate with slide-in logo
- integrated PC, processor Intel® Atom™ Z510 1,1 GHz, 1 GB DDR2RAM
- 128 MB compact flash type I, extended temperature range
- 2 RJ 45 Ethernet connectors in the mounting arm adapter,
10/100/1000 MBit, IP 65
- 1 RS232 serial port interface in the mounting arm adapter,
DIN 12-pin IP 65, with adapter cable from DIN 12-pin to D-Sub, 9-pin
- 24 V power supply, connector in the mounting arm adapter
- operating temperature 0 to 55 °C
- operating system Microsoft Windows CE 6, English
- C9900-F827 slide-in label type "Schoeler"
- Customised push-button extension
- C9900-M405 Mounting arm adapter plate with a cable pit
centrically attached at the Panel PC for mounting arm system
Rittal CP6508.020 or Rittal CP6501.170 instead of Rolec
Tara Plus. Mounting arm from top or bottom, wiring through the
mounting arm with cable gland M20 in the wiring area of the
mounting arm adapter plate
|
Beckhoff Vietnam
|