Takuwa Vietnam - Synchro/Analog Converter (SLDC5C Series) - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
0902937088

Ms Liên: lien.ans@ansvietnam.com

Menu sản phẩm

Ứng dụng

Hãng sản xuất

Lượt truy cập

Đang online 25
Lượt truy cập 7443017

Takuwa Vietnam - Synchro/Analog Converter (SLDC5C Series)

Loại sản phẩm: Synchronous Motor

Mã sản phẩm: Synchro/Analog Converter (SLDC5C Series)

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Takuwa

Giá : Vui lòng liên hệ

SLDC5C series is, a data converter from the synchro into the analog.

 

      

 

Features

  • ・Suitable for syntonic speed control
  • ・Compact size
  • ・Easy zero adjustment by one touch button
  • ・Function with upper limit, addition

Available sites

  • 　・Control for industrial equipment

Main Specification

 

Power supply input AC90～242V、50/60Hz
Internal power consumption 14VA or less
Input Signal Synchro 3-wire signal 　MAX.AC90V、50/60Hz
Method of insulation Transformer insulation
Impedance 100kΩ or more
Follow-up speed 100r/min
Deviation voltage output
Vε		 Voltage signal DC0V～5V、DC0V～10V、DC0V～±5V、DC0V～±10V
（select from mode switch）
Accuracy ±0.1%F.S（Span width 270°～360°）
Temperature coefficient ±0.005%F.S／℃（Span width 270°～360°）
Load resistance 3kΩ or more
Output adjustment range ±30°～ ±180°(at synchro angle)
Speed control output Vo Voltage signal Vo=Vε＋Vs
Load resistance 3kΩ or more
Setting voltage input Vs Setting voltage level DC-10V～+10V
Input impedance 3kΩ or more
Comparison
signal
output		 Output form No voltage "a" contact (Photo MOS relay output)
Output rating 50V（AC／DC）、0.1A
Logic “feasible”＝ON, “Not feasible”＝OFF
Present value correction function Function The deviation voltage output Vε at an arbitrary position can be adjusted to the correct (preset corrected position)
・Dedicated to zero point correction 1 point
　(correction by means of the front zero adjustment switch)
・Arbitrary position correction 1 point
　(correction by means of external correction input)
Correction range -180.00°～ 179.91°(at synchro angle)
External correction signal input No voltage contact signal or open collector input signal
Vcc＝+12V、IF＝2mA（typ）
Forward/Reverse switching function Function To invert the polarity of the deviation voltage output Vε
Signal input No voltage contact signal or open collector input signal
Vcc＝+12V、IF＝2mA（typ）
Insulation resistance Between power supply input terminals R1/R2 connected together and FG: 500 VDC; 10 MΩ or more when using an insulation resistance meter
Dielectric strength voltage Between power supply input terminals R1/R2 connected together and FG: 1500 VAC for 1 minute
Ambient operating temperature 0℃～+55℃
Ambient operating humidity 30 ～ 90%RH; there shall be no condensation.
Vibration resistance Compliant with JIS C 60068-2-6
(20 m/s2, 10 ～ 55 Hz; 10 times in each axial direction)
Shock resistance Compliant with JIS C 60068-2-27
 (150 m/s2, 11ms; for each axis, 3 times each in both　directions)
Painting Munsell N1.5 half gloss
External dimensions 136mm(H)×72mm(W)×110mm(D)
Weight 2.0kg以下

Sản phẩm liên quan

Takuwa Vietnam - Synchro/ ...

Takuwa Vietnam - Wire-Spr ...

Takuwa Vietnam - LT400 Se ...

Takuwa Vietnam - Synchro ...

Takuwa Vietnam - 23 Serie ...

Takuwa Vietnam - 86-15 Se ...

Takuwa Vietnam - 86 Serie ...

Takuwa Vietnam - 64 Serie ...

Takuwa Vietnam - 62 Serie ...
http://tudonghoaans.com/