Couplers - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Type: KF-4-F

Coupler KF-4-F is used to combine two or three antennas into one output.
It is used only indoor, usually in the attic, near antennas.
It can be mounted on the beam (two kniping screws are attached) or wall (screws not supplied).
Coupler KF-4-F is packed into polybag with hanging carton.


KF-4-F 
5-69, UHF

• No. of inputs: 2

• Input 1: Ch. 5-69 ; 147-862 MHz

• Input 2: Ch. 21-69 ; 470-862 MHz

• Input 3: -

• Impedance connections: 75 Ohm ; F female

• Insertion loss: 2,5 dB

KF-4-F 
UHF, UHF, VHF

• No. of inputs: 3

• Input 1: Ch. 21-69 ; 470-862 MHz

• Input 2: Ch. 21-69 ; 470-862 MHz

• Input 3: Ch. 5-12 ; 174-230 MHz

• Impedance connections: 75 Ohm ; F ženski

• Insertion loss: 2,5 dB

KF-4-F 
UHF, UHF

• No. of inputs: 2

• Input 1: Ch. 21-69 ; 470-862 MHz

• Input 2: Ch. 21-69 ; 470-862 MHz

• Input 3: -

• Impedance connections: 75 Ohm ; F ženski

• Insertion loss: 2,5 dB

KF-4-F 
UHF, VHF

• No. of inputs: 2

• Input 1: Ch. 21-69 ; 470-862 MHz

• Input 2: Ch. 5-12 ; 174-230 MHz

• Input 3: -

• Impedance connections: 75 Ohm ; F ženski

• Insertion loss: 2,5 dB

Coupler KF-4-F with two inputs

Coupler KF-4-F with three inputs 


 

Type: KR-F UHF, UHF

Antenna coupler is suitable to combined two antennas into one output.

It can be mounted into mast (PVC strip included), beam or wall (mounting material not included).

It is used for outdoor or indoor use.

• Input 1: UHF (470-870 MHz)

• Input 2: UHF (470-870 MHz), with power pass

• Impedance: 75 Ohm

• Connectors: 3 x »F« type female connector

Type: KR-F VHF, UHF, UHF+

Antenna coupler is suitable to combined three antennas into one output.

It can be mounted into mast (PVC strip included), beam or wall (mounting material not included).

It is used for outdoor or indoor use.

• Input 1: VHF (5-300 MHz)

• Input 2: UHF (470-870 MHz)

• Input 3: UHF (470-870 MHz), with power pass

• Impedance: 75 Ohm

• Connectors: 4 x »F« type female connecto

Type: KR-F UHF, UHF, UHF+

Antenna coupler is suitable to combined three antennas into one output.

It can be mounted into mast (PVC strip included), beam or wall (mounting material not included).

It is used for outdoor or indoor use.

• Input 1: UHF (470-870 MHz)

• Input 2: UHF (470-870 MHz)

• Input 3: UHF (470-870 MHz), with power pass

• Impedance: 75 Ohm

• Connectors: 4 x »F« type female connecto