Hans schmidt Vietnam - Torque Meter DTXS and DTXA - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
Click here to chat Skype Me™!
than.ans@ansvietnam.com
huy@ansgroup.asia

Mr. Thân: 038.568.5705

Mr. Huy: 0934 039 951

Menu sản phẩm

Hãng sản xuất

Lượt truy cập

Đang online 54
Lượt truy cập 5970497

Hans schmidt Vietnam - Torque Meter DTXS and DTXA

Loại sản phẩm: Torque Meter

Mã sản phẩm: Torque Meter DTXS and DTXA

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Measuring range 0 - 2.000 Nm / 5.000 Nm / 10.00 Nm
Resolution 0.001 Nm / 0.01 Nm

 

Desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
 

For applications in beverage, cosmetic and pharmaceutical industry etc. 

Torque meter with digital output signal for data processing with a PC
 

 

Special Features

  • Display the opening or closing torque (clockwise and counterclockwise torque)
  • 2 selectable modes: Real Time: to display load transients
                                          Peak: to capture the peak force achieved during a test
  • Table for containers with Ø from 20 to 160 mm (small table for diameters from 7 up to 50 mm Ø is available) - standard unit
  • Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
 

 

  • Torque meter with high internal sampling rate of 2000 times/sec
  • Display update time 10 times/sec
  • Easy to read display (OLED)
 

Display torque meter DTXA
 

  • Selectable units: Nm, kgfm, Lbf.in or Ncm, kgfcm, ozf.in
  • Storage of 1000 values for recall:
    - on the display
    - for data transfer to a PC
    - for printing with report
  • 4 output signals: USB, RS232, analog, and Mitutoyo Digimatic
 

Special features of model DTXA in comparison to standard unit DTXS

 

  • Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec)
  • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording 
  • Indication of two peak values per measurement, e. g. closure with rated break point
 

Standard Features

  • Torque measuring unit for fast, accurate measuring
  • High repeatability
  • Easy to use
  • Inclusive 30 days trial version of Software »Force Recorder Professional«
  • Manufacturer`s certificate with measured values is included
 

Available Models - Standard Unit*

Model Model Measuring range Resolution
DTXS-2N DTXA-2N 0 - 2.000 Nm (200 Ncm) 0.001 Nm (0.1 Ncm)
DTXS-5N DTXA-5N 0 - 5.000 Nm (500 Ncm) 0.001 Nm (0.1 Ncm)
DTXS-10N DTXA-10N 0 - 10.00 Nm (1000 Ncm) 0.01 Nm (1 Ncm)
 

* includes table DT-TB
 

Available Models - self configurated

Model Model Description
DTXS-2N-Z DTXA-2N-Z without table
DTXS-5N-Z DTXA-5N-Z without table
DTXS-10N-Z DTXA-10N-Z without table
 

Possible Tables

Table 
 

For samples with Ø from 20 up to 160 mm.
Includes table pins (TB-P) with urethane surface, length 25 mm.
Recommended for PET bottles, cans etc.
Order number: DT-TB

Click picture for more information

Table 
 

For samples with Ø from 20 up to 160 mm.
Includes table pins (TB-01P) from stainless steel V2A, corrugated surface, length 26 mm.
Recommended for aluminium cans, hard plastic containers etc.
Order number: DT-TB-01

Click picture for more information

Table 
 

For samples with Ø from 20 up to 160 mm.
Includes table pins (TB-02P) with urethane surface, length 70 mm.
Recommended for conductor plates, lens of cameras, large bottles, etc.
Order number: DT-TB-02

Click picture for more information

Small Table 
 

For samples with Ø from 7 up to 50 mm (for max. 5 Nm nominal load).
Includes table pins (ST-P) with urethane surface, length 10 mm.
Recommended for locks, containers for eye drops, etc.
Order number: DT-ST

Click picture for more information

Small Table 
 

For samples with Ø from 7 up to 50 mm (for max. 5 Nm nominal load).
Includes table pins (ST-01P) from stainless steel V2A, corrugated surface, length 10 mm.
Recommended for electronic components, plugs, etc.
Order number: DT-ST-01

Click picture for more information

Small Table 
 

For samples with Ø from 7 up to 50 mm. (for max. 5 Nm nominal load).
Includes table pins (ST-02P) with urethane surface, length 30 mm.
Recommended for cosmetics boxes, door knobs, lamps, etc.
Order number: DT-ST-02

Click picture for more information

Torque Pin Chuck 
 

Infinitely adjustable, 0.5 up to 6.5 mm Ø
Order number: DT-DC-6.5

Click picture for more information

Torque Pin Chuck 
 

Infinitely adjustable, 0.5 up to 6.5 mm Ø, stainless steel (V2A)
Order number: DT-DC-6.5SUS

Click picture for more information

Torque Pin Chuck 
 

Infinitely adjustable, 0.5 up to 4 mm Ø (for torque meters with 2 or 5 Nm nominal load).
Order number DT-DC-4

Click picture for more information

Torque Pin Chuck 
 

Infinitely adjustable, 1.2 up to 12 mm Ø (for torque meters with 5 or 10 Nm nominal load).
Order number: DT-DC-13

Click picture for more information

 

Standard Accessories

ZT Logger 

USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
AC Adapter 

For 100 - 240 V AC
Order number: ADW-6010
Inspection Certificate 
 

Delivery includes a manufacturers inspection certificate free of charge

Click picture for more information

 

Accessories (optional)

Force Recorder Light

Software for data aquisition by USB output
- Force-time graph
- Force gauge function setting
- Data storage as CSV file
Order number: SW-21
Force Recorder Standard 

Additional functions in comparision to Force Recorder Light:
5 graphs at maximum can be displayed in a table
Order number: SW-22
Force Recorder Professional 

Additional function in comparision to Force Recorder Light
- 5 graphs at maximum can be displayed i a table
- Force-displacement graphing (possible only in combination with a test stand with linear 
   scale)
Order number: SW-23
Printer 
 

To print stored values using Mitutoyo Digimatic output.
Order number: DP-1 VR

Click picture for more information

Paper Roll 

For Printer DP-1 VR, 1 Set = 5 pieces
Order number: DP-P
Table Pins 
 

1 set (4 pieces), 25 mm long with urethane surface for the table.
Recommended for PET bottles, cans etc.
Order number: TB-P

Click picture for more information

Table Pins 
 

1 set (4 pieces), 26 mm long from stainless steel for the table.
Recommended for aluminium cans, hard plastic containers etc.
Order number: TB-01P

Click picture for more information

Table Pins 
 

1 set (4 pieces), 70 mm long with urethane surface for the table.
Recommended for conductor plates, lens of cameras, large bottles, etc.
Order number: TB-02P

Click picture for more information

Table Pin 
 

1 set (4 pieces), 10 mm long with urethane surface for the small table.
Recommended for locks, containers for eye drops, etc.
Order number: ST-P

Click picture for more information

Table Pins 
 

1 set (4 pieces), 10 mm long from stainless steel for the small table.
Recommended for electronic components, plugs, etc.
Order number: ST-01P

Click picture for more information

Table Pins 
 

1 set (4 pieces), 30 mm long with urethane surface for the small table.
Recommended for cosmetics boxes, door knobs, lamps, etc.
Order number: ST-02P

Click picture for more information

Sample Stage 
 

To get a flat working face on the table, for placing the sample. 
1 set = 2 peaces
Order number: TB-SP

Click picture for more information

Connecting Cable 

For analog output, for connection to a line recorder.
Length approx. 3 m
Order number: CB-108
Connecting Cable 

For RS 232 output with sub D 9 female, for connection to PC.
Length approx. 3 m
Order number: CB-208
Connecting Cable 

For Mitutoyo Digimatic output, for connection to Mitutoyo printer DP-1 VR. 
Length approx. 3 m
Order number: CB-308
Connecting Cable 

with open ends (37-pin) for all available output signals to connect an unique device.
Order number: CB-908
Connecting Cable 

for trigger input (input signal from an external device e. g. electronic switch to stop the measurement)
Order number: CB-808
Accumulator 
 

Nickel metal hydride accumulator, 2-pole connector
3.6 V, 1300 mAh
Order number: DP-308

Click picture for more information

Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes - Standard Unit

Torque meter, 1 table, 1 set spring pins 25 mm long, AC adapter, manufacturer`s inspection certificate, USB cable 1.5 m, CD-ROM with driver, simple software for communicatin and data logging »ZT-Logger« operating instructions in english
 

Dimensions

DimensionsFor PDF-file please
click picture
 

Specifications

Accuracy: ±0.5 % full scale ±1 digit
Measuring frequency: 2000 times/s
Selectable units: Nm, Ncm, kgfm, kgfcm, Lb.in, and Lb.ozf
Display: OLED, 4 digit, 14 mm high
Overload capacity: Approx. 200 % full scale,
flashing diplay beyond 110 % full scale
Display update: 10 times/s
Memory: Internal memory for max. 1000 values
(clockwise or counter clockwise torque and peak values)
Setpoints: Min (-NG), Max (+NG) programmable,
with output signal
Output signal: USB
RS 232 C (8, 1, N, 19200)
analog ±2 V DC
Mitutoyo Digimatic 
Open collector 3x comperator (+Ng, OK, -NG)
overload signal
Temperature range: 0 - 40 °C
Air humidity: 80 % RH, max.
Power supply: Rechargeable NiMH battery pack (approx. 8 hours continuous use)
and/or 100 - 240 V AC adapter with two adapters(EU/USA)
Dimensions (approx.): Display unit: 305 x 233 x 127 mm (LxWxH)
Weight: (approx.): approx. 4900 g (approx. 5900 g)