Hans schmidt Vietnam - Door Tester Unit ZTA-RDM-2000N - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
Click here to chat Skype Me™!
than.ans@ansvietnam.com
huy@ansgroup.asia

Mr. Thân: 038.568.5705

Mr. Huy: 0934 039 951

Menu sản phẩm

Hãng sản xuất

Lượt truy cập

Đang online 86
Lượt truy cập 6609876

Hans schmidt Vietnam - Door Tester Unit ZTA-RDM-2000N

Loại sản phẩm: Force Gauge and Test Stands

Mã sản phẩm: Door Tester Unit ZTA-RDM-2000N

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Measuring range 0 - 2000 N

 

Digital force gauge for determination of closing forces of automatic doors according DIN EN 12445, DIN EN 12650 and JISA4721
 

High quality force measuring unit with interface (RS 232, analog and USB and memory).
This device has a fast measuring frequency for exact acquisition of peak values.
 

Force gauge with seperate remote load sensor
 

 

Special Features

  • 2 operation modes:
    real time - display the actual tension or compression force
    peak force - to measure the peak force during a test
  • Force measuring device with extremely high sampling rate of 2000 times/sec for fast acquisition of peak values
  • Display update time 10 times/sec
  • Easy to read display (OLED)
 

display force gage ZTA-RDM-2000N
 

  • The header and footer of the display can be customized, as well as switched on and off
  • Programmable high/low set-points for go/no-go testing:
    with color-coded LED display: underrun (-NG) - good (OK) - exceeding (+NG) and relais outputs
 

LED`s force gauge ZTA-RDM-2000N
 

  • Storage of 1000 values, which can be recalled:
    - on the display
    - data transfer to a PC 
    - for printing with report
  • Output signal:
    - RS 232 C for connecting to a PC
    - USB
    - analog ±2 V DC
    - Mitutoyo Digimatic e. g. to print the readings on a printer
  • Display can be reversed for inverted use; e. g. on vertical test stand
 

reversed display force gauge ZTA-RDM-2000N
 

  • »Zero Set« to zero the gauge in all operating positions
  • With separate remote load sensor
  • Force gauge with user switchable units: N, kgf (gf) und lbf (ozf)
  • Selectable language (english, german, italian, french, spanish, chinese, japanese, korean)
  • Manufacturers inspection certificate is included
 

Special features in comparison to standard unit ZTS-RDM-2000N
 

  • Readings can be saved on a USB flash drive (Not included in delivery).
  • 2 high/low output values can be set; If the reading reaches one of the output values, data will be sent to external devices (e.g. PC, printer) for data recording 
  • Indication of two peak values per measurement.
 

Standard Features

  • Easy to change extension shaft
  • Force measuring device for exact measuring with an accuracy of 0.2 %
  • 200 % overload protection
  • Ergonomically-designed, rugged die-cast aluminium housing
  • Non-slip rubber grip
  • Operates on rechargeable battery and/or AC adapter
 

Available Models

Model Measuring Range Description
ZTA-RDM-2000N 0 - 2000 N Indicator, load cell, extension shafts,
spacer handle and Software
ZTA-DM-2000N 0 - 2000 N Indicator and load cell
 

The accuracy of the load cell can only be assured, by using with the force gauge, the load cell ist adjusted for.

 

Standard Accessories

Load Cell 
 

according to DIN EN 12445, DIN EN 12650 and JIS A4721
Order number: DM-2000N

Click picture for more information

ZT Logger 

USB cable approx. 1.5 m long, CD-ROM with USB-driver and software "ZT-Logger" for data transfer
AC Adapter 

For 100 - 240 V AC
Order number: ADW-6010
Inspection Certificate 
 

Delivery includes a manufacturers inspection certificate free of charge

Click picture for more information

 

Additional Standard Accessories ZTA-RDM-2000N

Force Recorder Standard 

Additional functions in comparision to Force Recorder Light:
5 graphs at maximum can be displayed in a table
Order number: SW-22
Extension Shaft 
 

For measuring forces at different positions of the closing operation.
Order number: DM-ETM-200 - 200 mm
Order number: DM-ETM-300 - 300 mm
Order number: DM-ETM-500 - 500 mm

Click picture for more information

Spacer Handle 
 

for easy positioning the load cell during measuring with the extension shaft
Order number: DM-ETM-001

Click picture for more information

 

Accessories (optional)

Connecting Cable 

For analog output, for connection to a line recorder.
Length approx. 3 m
Order number: CB-108
Connecting Cable 

For RS 232 output with sub D 9 female, for connection to PC.
Length approx. 3 m
Order number: CB-208
Accumulator 
 

Nickel metal hydride accumulator, 2-pole connector
3.6 V, 1300 mAh
Order number: DP-308

Click picture for more information

Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes

Indicator with carrying case and separate force sensor, AC adapter, USB connecting cable, USB adapter, CD-ROM with USB-driver, simple software for data transfer, manufacturer`s calibration report, operating instruction in english.

 

Additional for model ZTS-RDM-2000N
Software Force Recorder Standard, 3 extension shafts (200, 300, 500 mm) and spacer handle

 

Dimensions

DimensionsFor PDF-file please
click picture
 

Specifications

Measuring range: 2000 N
Measuring principle: Bidirectional force sensor with strain gauge
Displacement: max. 5 mm, 500 N per mm, ±1 digit
Extension shift: 200, 300 and 500 mm
Sampling rate: 2000 times/s
Accuracy: ±2 % full scale ±1 digit
A/D converter: 24 bit
Measuring units: N, gf (kgf), ozf (lbf) selectable
Display: 4 digit, 14 mm high
Overload capacity: 200 % full scale, 
symbol flashes at 110 % full scale
Zero adjustment: 10 % full scale
Memory: Flash memory of max. 1000 values
recallable peak - tension/compression force
Setpoints: Programmable Max/Min setpoints with color-coded indicators in the LED display
Output signal: RS 232 C (8, 1, N, 19200),
analog ±2 V DC,
USB
Temperature range: 5 - 45 °C
Air humidity: 85 % RH, max.
Low battery indicator: Display flashes
Power supply: Rechargeable NiMh batteries (approx. 8 h continuous use,
approx. 8 h charging time) and/or 230 V AC adapter
Mounting threads
for test stand:
4 x M4, Depth 5 mm
Housing material: Indicator: Die-cast aluminium
Load cell: Hardened aluminium
Dimensions: Indicator: 191 x 75 x 34 mm (LxWxH)
Load cell: 380 x 94 x 66 (LxBxH)
Weight, net (gross): Indicator: approx. 490 g (1380 g)
Load cell: 1200 g (1400 g)
 
Additonal functions in comparision to standard unit ZTS
Memory: Readings can be transfered from the internal memory to an USB flash drive or directly saved on it (sampling rate 100 times/sec.)
Setpoints: 2 additonal setpoints for go/no-go tests can be adjusted

Sản phẩm liên quan

Ergonomics Force Gauges S ...

Myometer Kit Series EKM5, ...

Hans schmidt Vietnam - Th ...

Hans schmidt Vietnam - Th ...

Hans schmidt Vietnam - Th ...

Hans schmidt Vietnam - Th ...

Hans schmidt Vietnam - Th ...

Hans schmidt Vietnam - Th ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Pe ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Do ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Di ...