Hans Schmidt Vietnam - Tension Meter DTMX - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Electronic tension meter for applications in textile and wire industry.
Special convenient for users aquiring additional process data to save them for example for a QM-system ISO9000ff

Model DTMX offers additional features to model DTMB:

• data memory
• statistical analysis
• interface for data printer and PC connection

Special Features

 top

Addtional features comparing model DTMX with basic unit model DTMB

• Memory for up to 100 tension values plus MIN, MAX, PEAK values
  - automatic calculation of average and standard deviation
  - all these data values can be recalled in the display or downloaded 
     to a printer or Personal Computer.
• 2 Memory modes:
  - continuous storage
  - on-demand storage
• Analog and serial interfaces
• Material selector switch for textile and wire applications (Tex and Wire) assures highest accuracy
• Calibration to customer supplied material is available (up to four different material calibrations)

Features model DTMB

• Microprocessor controlled tension meter for highest accuracy
• Measuring principle: double beam in bending with strain gauge
• Selectable update rates (0.5, 1, 2, or 4 seconds) to provide steady readings when tensions fluctuate (electronic damping)
• Measuring frequency: 62 measurements/second
• Built-in mounting holes permit fixed installation for online use
• The display shows averaged values calculated during the 
  update interval t₁ e. g. every second 1 x

• Saving MIN, MAX and PEAK values during a user-selected period. These values can be recalled at the display.
• Zero adjustment feature permits use of the tension meter in various measuring positions, maintaining highest accuracy
• Calibration to customer supplied material is available (up to two different material calibrations)
• Tension meter with built-in material thickness compensator improves accuracy for changing diameters (from tension range - 500 cN)
• Hand-held unit with built-in mounting holes permit fixed installation for online use

Standard Features

 top

• Everything in operator’s view: 
  - the guide rollers 
  - the measured material 
  - the readings
• Filament guide and roller shifting mechanism ensure easy acquisition of the running material
• Ball-bearing mounted, V-grooved guide rollers
• Tension meter with rugged aluminium housing
• Battery operated (AC adapter for continuous operation available)
• Certificate of Compliance with the order 2.1 according EN 10204 is included
• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Other measuring head widths available on request.
Other units of measure are available -  g or kg
* Depending on model, either width of filament guide or outer distance between outside 
   guide rollers. 
** deviating measuring head width with Code V1

*** Suitable for 95 % of applications (see table )
**** Accuracy: ± 3 % full scale (FS) and ± 1 dgit 

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Click the order-code, to get picture and drawing of the guide rollers