Hans schmidt Vietnam - Shore Durometer HPSDO - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
Click here to chat Skype Me™!
than.ans@ansvietnam.com
huy@ansgroup.asia

Mr. Thân: 038.568.5705

Mr. Huy: 0934 039 951

Menu sản phẩm

Ứng dụng

Hãng sản xuất

Lượt truy cập

Đang online 214
Lượt truy cập 6610021

Hans schmidt Vietnam - Shore Durometer HPSDO

Loại sản phẩm: Shore Durometer

Mã sản phẩm: Shore Durometer HPSDO

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Durometer according to Shore for determining the indentation hardness of plastic and medium hard to hard rubber materials
 

Shore DO hardness tester according ASTM D 2240 

Durometer with large seating for accurate measuring
 

shore durometer HPSDO for determining the surface hardness of plastic and rubberShore durometer HPSDO

Model Information

» Special Features
» Standard Features
» Operation
» Available Models
» Attachments and Accessories
» Delivery Includes
» Dimensions
» Specifications
Print version
 

Special Features

Back to top top
  • The spring loaded outer ring assures a constant measuring pressure and eliminates false readings due to difference between operators
  • Flat bottom prevent tilting and improves the measuring accuracy
  • Working face 18 mm Ø
 

working face hardness tester HPSDO
 

  • Adjustable Min./Max. indicator marks to highlight working range of the hardness tester
  • Optionally available: Calibration certificate with calibration report
 

Standard Features

Back to top top
  • Easy to use
  • High repeatability
  • Application range 20 - 80 Shore DO units
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
 

Operation

Back to top top
For measuring the hardness, the spring-loaded outer ring of the housing is pressed downwards until the edge of the ring meets the colored marking on the housing. This ensures a constant pressure and prevents measuring errors.
 

General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
 

operation shore durometer HPSDO
 

Available Models

Back to top top
Model Shore Application  
HPSDO Shore DO plastic and medium hard to hard rubber materials  
    alternative  
HPSA Shore A soft rubber, elastomers, natural rubber, soft PVC, leather, etc. more
HPSA-R..-M Shore A rubber coated rollers, rollers, and cots more
HPSD Shore D plastic and medium hard to hard rubber materials more
HPSB Shore B for harder material than Shore A more
HPSC Shore C medium hard rubber, elastomers and plastic more
HPS0 Shore O soft elastomers, soft elastic materials, medium fast textiles more
HPSAO Shore AO Foams, steering wheels and inner linings of motor vehicles more
 

Attachments and Accessories

Back to top top
Memory pointer Code M 
 

Memory pointer to capture and store value
(last or highest reading) during measuring.
Order code: e. g. HPSA-M
Test Stand 
 

Model PSHP for series measurements

  • Height adjustable 0 - 200 mm
  • Stroke lever action 40 mm
  • Various plates available optional

Click picture for more information
Control Ring  
 

To determine the displacement at 20 Shore
Order number: HP-P20

Click picture for more information
Control Rings 
 

To determine the displacement at 20, 40, 60 and 80 Shore. 
Includes a base disk as basis and an inspection certificate.
Order number: HP-P20-100

Click picture for more information
Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes

Back to top top
 

scope of delivery hardness tester HPSDO: Hardness tester with carrying case, Certificate of Compliance with the 
order 2.1 according EN 10204 free of charge, operating instructions in 
english or german as requested
 

Dimensions

Back to top top
DimensionsFor PDF-file please
click picture
 

Specifications

Back to top top
Indentor:
U-grooved 3/32''    
Depth of indentation: 0 - 2.5 mm
Typical applications: Plastic and medium hard to hard rubber materials
Accuracy: ± 1 hardness unit
Application range: 20 - 80 Shore DO
Standard: ASTM D 2240
Measuring spring force: ... 4,45 - 44,5 N
Test pressure*: Approx. 50 N
Scale diameter: 54 mm
Display range: 0 - 100 Shore DO units
Working face: 18 mm Ø
Base plate: 44.5 mm Ø
Weight, net (gross): Approx. 300 g (500 g)
Dimensions: 50 x 58 x 110 mm (LxWxH)
 

Sản phẩm liên quan

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...
http://tudonghoaans.com/