Đèn Diệt Khuẩn

UVC Disinfection

 

 

Môi Trường Không Khí / Air Disinfection

Indoor Air

Airflow

Recirculation Units (active)

Direct Emitters (passive)

Ducts

Monoblocks

Wall Units

Ceiling Units

Wall Units

Ceiling Units

 

 

LSK2030

UVR2250-2 UVR2250-4

WR with grille WB with reflector SWR over door

D direct DB with prot. cover DW (Low Budget)

EFM/EFD2000 Flange Systems

ES2000 Air Flow Modules

 

Bề Mặt / Surface Disinfection

Conveyor Belts

UV-Tunnels

Worktops

 

Over Belt

Below Belt

 

 

 

(T2000)

 

T2004 overhead, modular

T2000

 

T 2004, modular

T2002

 

T2004, modular

 

(T2005 indirect, fix)

 

(T2005 indirect, fix)

(T2005 indirect, fix)

 

 

Môi Trường Nước / Water Disinfection

Air Conditioning

Reservoirs, Cisternes

Reactors

Air Washers Cooling Towers

 

 

AQT2000 Immersion Units

EFM2000 / EFD2000 Flange Systems

AQD54/64

 

                 

 

 

 

 

 

 

Type of system

Application

EF2000 series

-EFM2018 -for 20 W 2K tube

-EFM2036 -for 30 or 36 W 2K tube

-EFD2018 – for 2 x 20 W 2K tubes

-EFD2036 – for 2 x 30 or 36 W 2K tubes

- Surface/coil treatment in Air Handling Units -Air stream disinfection -Water/liquid treatment in tanks

AQT 2000 series

- Water / surface treatment in humidifiers, air washers, cooling towers and water filtration systems

-AQT 2018 -for 18 W 2K tube

-AQT 2036 -for 36 W 2K tube

AQD series

- UVC flow through reactor for water treatment

-AQD 54 -for 36 W 2K tube

-AQD 54C -for 18 W 2K tube

-AQD 64 -for 36 W 2K tube

-AQD 64C -for 18 W 2K tube

T 2002-IP series

- Compact unit designed for conveyor belt treatment in food / meat processing industry to reduce the germ level on the belt service during production

-T2002-30IP -for 2 x 30 W 2H tubes

-T2002-36IP -for 2 x 36 W 2H tubes

UVR 2250-4

- Active UVC air treatment desinfection system for storage,

maturation, production rooms in food/meat industry

processing 400 m³ of air per hour

-UVR2250-4 -for 4 x 36 W 2K tubes

 

Tubes

K = for air stream, water and cold applications

H = for hot conditions

2036 means type 20 with 36 W power el.

-UVC2020-2K (400 mm)

-UVC2030-2K (585 mm)

-UVC2030-2H (585 mm)

-UVC2036-2K (842 mm)

-UVC2036-2H (842 mm)

 

Steril Air Vietnam

ES2000 product range

Steril Air Vietnam

sterilAir ES2036 duo- and duo flex-type air-duct modules can easily be retrofitted and incorporated in already-existing air ducts. The recently developed UVGI software is used here for optimal layout of the UVC airflow system.

Steril Air Vietnam

ES2000 flex installation kit

Steril Air Vietnam

sterilAir ES2000 flex installation series UVC disinfection units broadly correspond to the ES2000 series units.
In contrast to that of the sterilAir ES2000 device, however, the angle position of the tube holder in the ES2000 flex version is variable, allowing optimal adaptation of the unit to the given dimensions of a pre-existing air duct. It is therefore unnecessary to consider a tube-dependent minimum headroom

Steril Air Vietnam

EF2000 installation kit

Steril Air Vietnam

With this module sterilAir offers a flexible, multifunctional system for installation in liquid tanks and air conditioning systems or chambers.
The big advantage is that the lamp body can be simply inserted in the disinfection area from outside of the system. In contrast to other systems (e.g. ES2000) it is not necessary to use service doors or to dismount components to reach the installation point.

Steril Air Vietnam

LSK2030

Steril Air Vietnam

The LSK series of air-recirculation units enables the disinfection of room air in areas where direct or indirect UV emission must be avoided under all circumstances. Whether patient rooms, waiting rooms, laboratory workstations, isolation wards or offices: The system safely and reliably disinfects all forms of vegetative and/or generative micro-organisms

Steril Air Vietnam

UVR2250-2

Steril Air Vietnam

The UVR model range is divided into two systems:
UVR2250-2 for air flow rates up to 220 m³/h
UVR2250-4 for air flow rates up to 450 m³/h
The devices are advantageous due to a very high UVC doses and are therefore adapted for the deactivation of particularly resistant germs and spores. They are consisting of a of stainless steel tube and are primarily for applications in production and maturing rooms, as well as storehouses and cooling chambers. The smaller UVR2250-2 system has a total weight of 16 kg and is with a noise level of 42 dB(A) particularly silent. The device, which is also suitable for humid rooms, can be disassembled in its components for cleaning and maintenance purposes.

Steril Air Vietnam

UVR2250-4

Steril Air Vietnam

The UVR model range is divided into two systems:
UVR2250-2 for air flow rates up to 220 m³/h

Steril Air Vietnam

UVR2250-4 for air flow rates up to 450 m³/h

Steril Air Vietnam

The disinfection device UVR2250-4 is the more powerful version of the UVR2250-2. This higher quality model is equipped with four UVC tubes and has a power input of 250 W/1190 mA. It is predestined for highly contaminated and large volume halls due to an air flow rate of 450 m3/h and a very high UVC dose. The device, which is also suitable for humid rooms, can easily and quickly be disassembled in its components for cleaning and maintenance purposes

Steril Air Vietnam

D2000 ceiling emitters

Steril Air Vietnam

D2000-type ceiling emitters are ready-for-connection units available in two sizes: The standard D2036 version measures 905mm in length, whilst the compact D2018 version measures just 430mm. Both models have an instrument height of 100mm, and with a width of just 35mm are exceptionally slim. The units may be equipped with different tubes. They bear the CE mark, and are compliant with VDE and ENEC standards.

Steril Air Vietnam

The units may optionally be equipped with an inversely switched movement alarm, which automatically switches off the unit in the event of spatial movement.

Steril Air Vietnam

DB2000

Steril Air Vietnam

The DB 2000 series is developed as ceiling ermitters.

Steril Air Vietnam

The extended stainless steel radiation protection cover reliably prevents direct emission aimed downwards. Persons entering the storeroom are thus protected from intensive radiation, and the direct irradiation of products does not occur, in keeping with the Food Irradiation Ordinance.

Steril Air Vietnam

WR2000 wall emitter

Steril Air Vietnam

Manufactured from high-grade stainless steel and other corrosion-resistant materials, this disinfection system consists of a device with fixture, a reflector and a protective grille positioned in front of it. The protective grille is provided with a UV-absorbing coating through which a highly concentrated horizontal UVC-ray ceiling is generated above the heads of those present.

Steril Air Vietnam

The lowest energy costs coupled with high efficiency and long tube-change intervals are the outstanding features of this type of unit.

Steril Air Vietnam

WB2000 wall emitter

Steril Air Vietnam

The WB 2000 series is developed for less frequented rooms and is equipped with an optimized reflector element to release highest amount of UVC radiation into the over head area.

Steril Air Vietnam

The system has a protection degree of IP54 and therefore can be used under humid room conditions. Several dimensions and different types of UVC-tubes allow the perfect choice due to given room sizes and temperature range.

Steril Air Vietnam

SWR2036 Airlock- /wall emitter

Steril Air Vietnam

The SWR2036 is a combined airlock-/wall emitter for continuous indoor-air disinfection. The system is mounted above the door, and generates highly concentrated UVC radiation both on the horizontal and on the vertical. The concentration of rays is achieved via a built-in reflector with a protective grille in front of it.

Steril Air Vietnam

This dual function makes the device clearly superior to any UV-based portable device working with a closed chamber according to the air-circulation process!

Steril Air Vietnam

T2000 UVC Surface Disinfection

Steril Air Vietnam

With the sterilAir T2000 Series surface disinfection modules, the UVC radiation is concentrated with the aid of a special reflector, and focused onto the surface to be disinfected.

Steril Air Vietnam

The T2000 series is available in different sizes. The standard unit is a total 911 mm in length, whilst the effective radiation range is around 765 x 75mm. The high-frequency electronics built into the unit guarantee a safety cut-out in the event of malfunctioning, and UV output remains steady even during mains-power fluctuations.

Steril Air Vietnam

T2002-IP UVC Surface Disinfection

Steril Air Vietnam

This unit, completely manufactured from stainless steel or rustproof materials, is available in different designs/ upgrade levels.

Steril Air Vietnam

At the top upgrade level, the system is supplied with a water-repellent, fully encompassing IP64 housing. According to choice, the housing aperture is equipped with a window with a quartz pane, or with a special sheeting that is particularly tear-resistant and UV-permeable. At this upgrade level, the disinfection device is also fully usable under adverse conditions (high dust load, dripping water, etc.).

Steril Air Vietnam

T2004 UVC Surface Disinfection

Steril Air Vietnam

The T2004 Surface Disinfection System is a unit of modular design which can be optimally adapted to any operating situation encountered. Starting with an appliance body only 35 mm wide per module, as many units as wished may be combined. Each of these modules is both a carrier and an independent supplier of an individual disinfection tube.

Steril Air Vietnam

At around 41°C, the heat emission of the radiation sources used is gratifyingly low, so that even heat-sensitive surfaces can be disinfected reliably and safely.

Steril Air Vietnam

T2005 UVC Surface Disinfection

Steril Air Vietnam

The sterilAir T2005 is a robust, shock-resistant surface disinfection device whose UVC radiation sources are protected by a sturdy stainless-steel structure. This device not only serves to protect the tubes, but also meets statutory regulations prohibiting the use of unprotected radiation sources.

Steril Air Vietnam

AQD2048-C UVC Photoreactor

Steril Air Vietnam

The sterilAir AQD2048-C is the smallest stainless-steel photoreactor in the AQD series. The reactor housing consists of an especially high-grade 4A stainless steel (WN.4571), double-pickled and passivated for increased resistance.

Steril Air Vietnam

At the conventional default dose of 400 J/m², the maximum water flow rate is 800 litres/ hr. The unit is connected to the existing pipe system via the ½-inch externally threaded nozzles, fitted on the sides at different heights. It is already fully functional in the illustrated design. Sensor-supported monitoring is recommended.

Steril Air Vietnam

AQD2075-C UVC Photoreactor

Steril Air Vietnam

At a default dose of 400 J/m², this photoreactor is capable of safely disinfecting up to 1,400 litres/hr. The unit is connected to the existing pipe system via the ¾-inch externally threaded nozzles, fitted on the sides at different heights.

Steril Air Vietnam

The disinfection unit is delivered with a Swiss type-12 plug (standard), a two-pin earthed plug, or a 5m cable (not made up), as wished. It is already fully functional in the illustrated design. Sensor-supported monitoring is recommended.

Steril Air Vietnam

AQD2090-C UVC Photoreactor

Steril Air Vietnam

The AQD2090-C disinfection system is a total 700mm in length and is capable of disinfecting up to 2,500 litres/hr. (default dose: 400 J/m²). The unit is connected to an existing pipe system via its ¾-inch externally threaded nozzles, fitted on the sides at different heights.

Steril Air Vietnam

The disinfection unit is delivered with a Swiss type-12 plug (standard), a two-pin earthed plug, or a 5m cable (not made up), as wished. It is already fully functional in the illustrated design. Sensor-supported monitoring is recommended.

Steril Air Vietnam

AQD2136-1 UVC Photoreactor

Steril Air Vietnam

The sterilAir AQD2136-1 photoreactor housing is made of rustproof stainless steel (WN 1.4301) which is additionally pickled, passivated and glass-bead-radiated from the outside.

Steril Air Vietnam

The system is based on an energy-optimised sterilAir high-efficiency UVC tube with a particularly high output constancy. At the conventional default dose of 400 J/m², the maximum water flow rate is 3,000 litres/ hr. All safety functions of the system are monitored and controlled by the FCU2000 electronic control unit.

Steril Air Vietnam

AQD2158-1 UVC Photoreactor

Steril Air Vietnam

The sterilAir AQD2158-1 largely corresponds to the AQD2136-1 model, although it boasts a performance-enhanced combination of electronic ballast and UVC tube capable of achieving higher disinfection efficiencies.

Steril Air Vietnam

All safety functions of the system are monitored and controlled by FCU2000 electronic control unit. At the conventional default dose of 400 J/m², the maximum water flow rate is 4,000 litres/hr. The reactor housing is made of stainless steel (WN 1.4301) which is additionally pickled, passivated and glass-bead-radiated from the outside.

Steril Air Vietnam

AQD2136-3 UVC Photoreactor

Steril Air Vietnam

The sterilAir AQD2136-3 boasts three energy-optimised long-life, high-output-constancy UVC tubes, fed via three supply units which are completely independent of each another. At the conventional default dose of 400 J/m², the maximum water flow rate is 7,000 litres/hr.

Steril Air Vietnam

The sterilAir FCU2000 or UES2004-SE control units allow the operating status of each individual radiation source as well as the measuring result of the built-in UVC sensor to be recorded and displayed, both on site and via the optional remote-diagnosis connection. If required, individual radiation sources can be deliberately switched off and on.

Steril Air Vietnam

 

...

[Thư đã được cắt bớt]  Xem toàn bộ thư
 
 
 
 
 Quay lại Share on Facebook  Google Lần xem (484)  Lên đầu trang